journal article·1991-07-01

Stress variation with temperature/time and its correlation to film structure and deposition parameters

Rajiv Rastogi, Vineet Dharmadhikari, Alain Diebold

Publisher page

Abstract

This study focused on measuring the stress of TiN films prepared by rapid thermal processing, by sputtering, and by furnace annealing. Also included in the study were W and Al alloy films. The stress measurements were done at room temperature, and then further data were collected with temperature up to 870 °C for W and TiN. Al alloy films were temperature cycled up to 500 °C. Film structure was studied by transmission electron microscopy (TEM) analysis prior to and just after thermal cycling. Hysteresis curves were obtained for all films. Graphical stress temperature correlations were made for films of different thicknesses. TEM results of TiN films prepared by rapid thermal processing, furnace annealing, and sputter deposition, indicated a reduction in grain size along with an increase in the tensile stress upon completion of thermal cycling of the films.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

SEMATECH, 2706 Montopolis Drive, Austin, Texas 78741

References

Reference metadata was not supplied for this record.