journal article·1986-05-01

Hollow-cathode-enhanced magnetron sputtering

J. J. Cuomo, S. M. Rossnagel

Publisher page

Abstract

A hollow cathode arc electron source has been added to a conventional planar magnetron sputtering system to form a triode magnetron. The hollow cathode source was chosen in place of a filament for high emission current at low energy, lifetime, and ease of operation in high magnetic fields and reactive gases. The electrons emitted from the hollow cathode produced additional gas ionization, resulting in a denser plasma at constant voltage. Up to 60% of the hollow cathode emission current could be directly coupled into the discharge current of the magnetron. Increases in the discharge current and the deposition rate of up to 10× were recorded over the conventional magnetron at the same voltage. The hollow cathode enhanced magnetron discharges were also capable of high current operation at voltages down to 20 V, which is below the sputter threshold. The pressure of operation could also be reduced significantly, and the magnetron could be operated at full power as low as 5×10−5 Torr in argon.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

IBM Thomas J. Watson Research Center, Yorktown Heights, New York 10598

References

Reference metadata was not supplied for this record.