TiN thin film on stainless steel for extremely high vacuum material
Source abstract
Abstract
We have shown that titanium nitride (TiN) coating by activated reactive evaporation using the hollow cathode discharge method is a good surface treatment for stainless steel used in extremely high vacuum (XHV) applications. The TiN film blocks hydrogen diffusion because it has a much lower hydrogen permeation coefficient than stainless steel. By varying the coating and film parameters (e.g., thickness, composition, and substrate bias voltage Vb) the barrier effects on hydrogen permeation of the TiN films were evaluated using small membrane samples. The parameters were varied to optimize the properties of the TiN coating for vacuum materials. The structure of the TiN films was analyzed by an x-ray diffractometry and transmission electron microscopy to clarify the dependence of the barrier effect on the film structure. Stoichiometric TiN films with few defects were shown to have high barrier effects. To demonstrate the use of TiN coatings for XHV applications, the outgassing rates of a stainless steel chamber with and without a TiN film were measured by a modified throughput type apparatus that had a bakeable cryopump for obtaining XHV. The outgassing rates for the chambers were measured using a method which completely eliminated the outgassing contribution of the vacuum gauges. The nitrogen equivalent outgassing rates of the stainless steel chamber with and without a TiN film were 7×10−12 and 9.7×10−10 Pa m s−1, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Sensor Technologies Research · Plasma Diagnostics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Tsukuba Institute for Super Materials, ULVAC JAPAN, Ltd., 5-9-7 Tokodai, Tsukuba, Japan 300-26
References
Reference metadata was not supplied for this record.