journal article·2002-09-01

Optimized oxygen plasma etching of polyimide films for low loss optical waveguides

Navnit Agarwal, Shom Ponoth, Joel Plawsky, P. D. Persans

Publisher page

Abstract

Sidewall roughness in waveguides is one of the consequences of a reactive ion etch (RIE) step. Sidewall roughness increases scattering losses and can impediment the scaling of waveguide dimensions to on-chip levels. This article presents results from our experiments on the study of optimal RIE conditions to minimize roughness on waveguide sidewalls. Roughness in planar polyimide films was studied for different plasma etch conditions to obtain an understanding of how roughness evolves. Pressure was found to be the dominant factor affecting interface roughness. RIE done at lower pressures was found to increase the roughness on the film surface. We propose that the roughness produced depends on the angle of incidence of the etchant species with respect to the surface the more obliquely the etchant species were incident on the surface, the lower was the roughness produced. Roughness produced on waveguide sidewalls was studied by measuring their propagation loss. For sidewalls, lower pressure RIE resulted in smoother sidewalls. This result was correlated with the previously obtained results for thin film surfaces. Based on our experiments we propose low pressure RIE to minimize sidewall roughness and fabricate low loss optical waveguides.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Photonic and Optical Devices · Advanced Fiber Optic Sensors · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for Integrated Electronics and Electronics Manufacturing, Rensselaer Polytechnic Institute, Troy, New York 12180-3590

References (13)

Show source-provided references
1. Proc. SPIE · 1999 · 3799 · 20210.1117/12.363901 ↗
2. IEE Proc.: Optoelectron. · 1994 · 141 · 242
3. Appl. Phys. Lett. · 2000 · 77 · 161710.1063/1.1308532 ↗
4. J. Appl. Phys. · 1994 · 76 · 250510.1063/1.357610 ↗
5. Mater. Res. Soc. Symp. Proc. · 2000 · 597 · 125
6. Appl. Phys. Lett. · 2001 · 78 · 229410.1063/1.1364507 ↗
7. Proc. R. Soc. London, Ser. A · 1982 · 381 · 1710.1098/rspa.1982.0056 ↗
8. Phys. Rev. Lett. · 1986 · 56 · 88910.1103/PhysRevLett.56.889 ↗
9. J. Appl. Phys. · 1988 · 64 · 59010.1063/1.341947 ↗
10. Phys. Rev. B · 2000 · 61 · 301210.1103/PhysRevB.61.3012 ↗
11. Phys. Rev. B · 2000 · 62 · 211810.1103/PhysRevB.62.2118 ↗
12. Phys. Fluids B · 1991 · 3 · 279610.1063/1.859987 ↗
13. Appl. Opt. · 1973 · 12 · 290