journal article·1999-07-01

Ultrathin Cu films on Si(111): Schottky barrier formation and sensor applications

H. Nienhaus, H. S. Bergh, B. Gergen, A. Majumdar, W. H. Weinberg, E. W. McFarland

Publisher page

Abstract

Ultrathin Cu films were evaporated on Si(111) surfaces at substrate temperatures of 175 K. By use of a microfabricated device structure, zero-force electrical contacts were formed on the thin Cu layers during evaporation. They allowed current/voltage measurements of diodes with Cu films between 40 and 60 Å . Although the rectifier properties are improved with increasing thickness, the 60 Å diode still exhibits a large inhomogeneous interface with a low barrier height of 0.47 eV and an ideality factor of 2.1. Annealing the diode to room temperature leads to significant changes in the barrier height which increases to 0.65 eV and the ideality factor which decreases to unity, suggesting a modification of the interface. The annealed thin-metal diodes may be used as atomic hydrogen sensors. A chemicurrent is observed in the diode when exposed to H atoms. The current is based on a nonadiabatic electron–hole pair creation which occurs during exothermic adsorption of hydrogen on Cu surfaces.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and interfaces · Surface and Thin Film Phenomena · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, University of California, Santa Barbara, California 93106

Laboratorium für Festkörperphysik, Gerhard-Mercator-Universität, 47048 Duisburg, Germany

Department of Mechanical Engineering, University of California, Berkeley, California 94720

References (18)

Show source-provided references
1. Phys. Rev. Lett. · 1999 · 82 · 44610.1103/PhysRevLett.82.446 ↗
2. IEEE Trans. Electron Devices · 1981 · ED-28 · 1003
3. Sov. Phys. Semicond. · 1983 · 17 · 875
4. Phys. Rep. · 1995 · 253 · 16310.1016/0370-1573(94)00082-E ↗
5. Phys. Rev. B · 1993 · 48 · 883310.1103/PhysRevB.48.8833 ↗
6. Appl. Phys. Lett. · 1985 · 46 · 55710.1063/1.95537 ↗
7. J. Appl. Phys. · 1988 · 63 · 272010.1063/1.340966 ↗
8. Bell Syst. Tech. J. · 1968 · 47 · 19510.1002/j.1538-7305.1968.tb00038.x ↗
9. Surf. Sci. · 1995 · 324 · 24910.1016/0039-6028(94)00791-8 ↗
10. J. Vac. Sci. Technol. B · 1997 · 15 · 122110.1116/1.589442 ↗
11. Phys. Rev. B · 1990 · 41 · 981910.1103/PhysRevB.41.9819 ↗
12. J. Appl. Phys. · 1991 · 70 · 740310.1063/1.349737 ↗
13. Appl. Phys. A: Mater. Sci. Process. · 1995 · 61 · 369
14. Rev. Sci. Instrum. · 1981 · 52 · 31310.1063/1.1136562 ↗
15. Rev. Sci. Instrum. · 1983 · 54 · 111710.1063/1.1137526 ↗
16. J. Vac. Sci. Technol. · 1968 · 5 · 11810.1116/1.1492595 ↗
17. J. Vac. Sci. Technol. A · 1995 · 13 · 76310.1116/1.579823 ↗
18. Nucl. Instrum. Methods Phys. Res. A · 1997 · 385 · 43510.1016/S0168-9002(96)00759-0 ↗