journal article·1997-07-01

Particle contamination formation in magnetron sputtering processes

Gary S. Selwyn, Corey A. Weiss, Federico Sequeda, Carrie Huang

Publisher page

Abstract

Defects caused by particulate contamination are an important concern in the fabrication of thin film products. Often, magnetron sputtering processes are used for this purpose. Particle contamination generated during thin film processing can be detected using laser light scattering, a powerful diagnostic technique which provides real-time, in situ imaging of particles >0.3 μm on the target, substrate, or in the plasma. Using this technique, we demonstrate that the mechanisms for particle generation, transport, and trapping during magnetron sputter deposition are different from the mechanisms reported in previously studied plasma etch processes, due to the inherent spatial nonuniformity of magnetically enhanced plasmas. During magnetron sputter deposition, one source of particle contamination is linked to portions of the sputtering target surface exposed to weaker plasma density. There, film redeposition induces filament or nodule growth. Sputter removal of these features is inhibited by the dependence of sputter yield on angle of incidence. These features enhance trapping of plasma particles, which then increases filament growth. Eventually the growths effectively “short-circuit” the sheath, causing high currents to flow through these features. This, in turn, causes mechanical failure of the growth resulting in fracture and ejection of the target contaminants into the plasma and onto the substrate. Evidence of this effect has been observed in semiconductor fabrication and storage disk manufacturing. Discovery of this mechanism in both technologies suggests it may be universal to many sputter processes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Copper Interconnects and Reliability · Metal and Thin Film Mechanics · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Physics Division, M/S E526, Los Alamos National Laboratory, Los Alamos, New Mexico 87545

Materials Research Corporation, 200 Route 303, North Congers, New York 10920

Seagate Peripherals Disk Division, 311 Turquoise Street, Milpitas, California 95035

References

Reference metadata was not supplied for this record.