journal article·2015-11-01

Investigation of blister formation in sputtered Cu2ZnSnS4 absorbers for thin film solar cells

Patrice Bras, Jan Sterner, Charlotte Platzer-Björkman

Publisher page

Abstract

Blister formation in Cu2ZnSnS4 (CZTS) thin films sputtered from a quaternary compound target is investigated. While the thin film structure, composition, and substrate material are not correlated to the blister formation, a strong link between sputtering gas entrapment, in this case argon, and blistering effect is found. It is shown that argon is trapped in the film during sputtering and migrates to locally form blisters during the high temperature annealing. Blister formation in CZTS absorbers is detrimental for thin film solar cell fabrication causing partial peeling of the absorber layer and potential shunt paths in the complete device. Reduced sputtering gas entrapment, and blister formation, is seen for higher sputtering pressure, higher substrate temperature, and change of sputtering gas to larger atoms. This is all in accordance with previous publications on blister formation caused by sputtering gas entrapment in other materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Midsummer AB , Elektronikhöjden 6, SE-17543 Järfälla, Sweden and Solid State Electronics, Angström Laboratory, , Box 534, SE-75121 Uppsala, Sweden

Uppsala University , Elektronikhöjden 6, SE-17543 Järfälla, Sweden and Solid State Electronics, Angström Laboratory, , Box 534, SE-75121 Uppsala, Sweden

Midsummer AB , Elektronikhöjden 6, SE-17543 Järfälla, Sweden

Uppsala University Solid State Electronics, Angström Laboratory, , Box 534, SE-75121 Uppsala, Sweden

Funding

Energimyndigheten

References (33)

Show source-provided references
1. Proc. Natl. Acad. Sci. U. S. A. · 2006 · 103 · 1572910.1073/pnas.0603395103 ↗
2. Adv. Energy Mater. · 2013 · 4 · 110.1002/aenm.201301465 ↗
3. Mater. Technol. · 2013 · 28 · 9810.1179/1753555712Y.0000000038 ↗
4. J. Appl. Phys. · 2010 · 107 · 01351610.1063/1.3273495 ↗
5. J. Am. Chem. Soc. · 2011 · 133 · 332010.1021/ja111713g ↗
6. Chem. Mater. · 2011 · 23 · 462510.1021/cm202379s ↗
7. Sol. Energy · 2013 · 98 · 33510.1016/j.solener.2013.09.020 ↗
8. Thin Solid Films · 2013 · 535 · 2210.1016/j.tsf.2012.10.081 ↗
9. Thin Solid Films · 2015 · 582 · 23310.1016/j.tsf.2014.11.004 ↗
10. J. Nucl. Mater. · 2001 · 299 · 12410.1016/S0022-3115(01)00679-1 ↗
11. J. Nucl. Mater. · 2008 · 375 · 22410.1016/j.jnucmat.2007.11.005 ↗
12. J. Nucl. Mater. · 1988 · 155–157 · 114910.1016/0022-3115(88)90486-2 ↗
13. J. Appl. Phys. · 2002 · 91 · 392810.1063/1.1430533 ↗
14. J. Electrochem. Soc. · 1986 · 132 · 198610.1149/1.2114267 ↗
15. Sol. Energy Mater. Sol. Cells · 2012 · 98 · 11010.1016/j.solmat.2011.10.019 ↗
16. Thin Solid Films · 2012 · 520 · 709310.1016/j.tsf.2012.08.002 ↗
17. J. Cryst. Growth · 2013 · 362 · 17410.1016/j.jcrysgro.2011.10.034 ↗
18. Thin Solid Films · 2009 · 517 · 251910.1016/j.tsf.2008.11.031 ↗
19. Prog. Photovoltaics Res. Appl. · 2014 · 22 · 1010.1002/pip.2265 ↗
20. J. Alloys Compd. · 2011 · 509 · 760010.1016/j.jallcom.2011.04.097 ↗
21. Appl. Phys. Lett. · 2012 · 100 · 01310610.1063/1.3673907 ↗
22. J. Am. Chem. Soc. · 2012 · 134 · 1933010.1021/ja308862n ↗
23. J. Alloys Compd. · 2012 · 539 · 19010.1016/j.jallcom.2012.06.042 ↗
24. J. Alloys Compd. · 2004 · 368 · 13510.1016/j.jallcom.2003.08.084 ↗
25. Vacuum · 2014 · 101 · 14610.1016/j.vacuum.2013.08.001 ↗
26. J. Vac. Sci. Technol. · 1977 · 14 · 15210.1116/1.569109 ↗
27. J. Appl. Phys. · 1975 · 46 · 172810.1063/1.321776 ↗
28. Thin Solid Films · 1996 · 283 · 5710.1016/0040-6090(95)08492-4 ↗
29. J. Vac. Sci. Technol. A · 1985 · 3 · 57610.1116/1.572997 ↗
30. J. Nucl. Mater. · 1992 · 186 · 15310.1016/0022-3115(92)90330-N ↗
31. 1970
32. IEEE Int. Reliab. Phys. Symp. Proc. · 2010 · 10 · 430
33. 2003