Initial boronization of the DIII–D tokamak
Source abstract
Abstract
A system has been installed to deposit a thin film of elemental boron on the walls of the DIII–D tokamak, in order to reduce the influx of impurities during plasma discharges. Subsequently new regimes of substantially improved tokamak energy confinement were obtained. The deposition of the boron layer is achieved during a glow-discharge session using a helium-diborane gas mixture and a film of ≊100 nm is deposited. The boronization system includes special storage and handling precautions for the diborane, a delivery and metering system for the glow discharge, modifications to the tokamak’s residual gas analyzer system, and a dedicated system for handling and neutralizing the exhaust gas from the tokamak. Tokamak discharges with similar parameters before and after boronization are used to characterize the effects of the boron film. Nickel has been reduced by a factor of 30, while impurities such as oxygen and carbon are reduced fivefold. A system of pulsing the glow discharge has been developed in order to improve the uniformity of the film applied
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic confinement fusion research · Superconducting Materials and Applications · Particle accelerators and beam dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
General Atomics, P.O. Box 85608, San Diego, California 92186-9784
University of California, Los Angeles, Los Angeles, California 90024-1597
Sandia National Laboratories, P.O. Box 5800, Albuquerque, New Mexico 87185
Institute of Plasmaphysics, Research Centre Jülich GmbH, Association Euratom/Kernforschungsanlage, P.O. Box 1913, Jülich, Germany
References
Reference metadata was not supplied for this record.