Properties of ZnO:In film prepared by sputtering of facing ZnO:In and Zn targets
Source abstract
Abstract
ZnO:In films were prepared by a sputtering method with targets facing. The lowest resistivity film is obtained at a substrate temperature of 150 °C using a ZnO target doped with 3 wt % In2O3. At substrate temperatures above 300 °C the resistivity of the film increases as the carrier concentration decreases. This implies a significant decrease in the donor impurity, ascribed to evaporation of the indium during film growth. From experiments with an additional Zn supply during deposition, we found that all of the doped indium is ionized as donor in ZnO:In, and that evaporation of depositing indium atoms is enhanced above 250 °C.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering, The University of Tokushima, Minamijosanjima 2-1, Tokushima 770 Japan
References (9)
Show source-provided references
1. J. Appl. Phys. · 1991 · 15 · 2190
2. Trans. Mater. Res. Soc. Jpn. · 1996 · 20 · 505
3. J. Vac. Sci. Technol. A · 1990 · 8 · 140310.1116/1.576890 ↗
4. Jpn. J. Appl. Phys., Part 2 · 1985 · 24 · L78110.1143/JJAP.24.L781 ↗
5. Thin Solid Films · 1990 · 193/194 · 71210.1016/0040-6090(90)90223-Z ↗
6. Jpn. J. Appl. Phys., Part 1 · 1988 · 27 · 117610.1143/JJAP.27.1176 ↗
7. Thin Solid Films · 1996 · 290/291 · 8410.1016/S0040-6090(96)09127-4 ↗
8. J. Vac. Sci. Technol. A · 1997 · 15 · 107410.1116/1.580432 ↗
9. Jpn. J. Appl. Phys., Part 2 · 1985 · 24 · L60910.7567/JJAPS.24S2.609 ↗