Characterization of helicon wave plasma designed for direct current sputtering
Source abstract
Abstract
The rf plasma produced in a helicon wave frequency range was studied using helical antennas and its application to dc sputtering at low Ar pressures was reported. A dense plasma of the order of 1012–1013 cm−3 could be obtained at a pressure around 0.1 Pa by using the antennas with azimuthal mode number of m=±1 or m=0. The measurement of the axial magnetic component Bz of the rf field in the plasma showed evidence of the excitation of helicon wave. A sputtering apparatus has been developed by means of the helicon wave plasma excited with a m=0 mode two-turn antenna. It was found that the characteristics of the rf plasma enhanced sputtering discharge were dominated by the properties of the rf plasma sustained at pressures as low as 3×10−2 Pa. A target current as high as 2 A at a pressure of 0.4 Pa was achieved, and sputtering of the Al target indicated that a deposition rate of 1 μm/min could be obtained under this condition.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 567, Japan
Department of Electrical Engineering, Kansai University, 3-3-35 Yamatecho, Suita, Osaka 564, Japan
References
Reference metadata was not supplied for this record.