journal article·2011-05-01Open access

Microstructure evolution of Ti3SiC2 compound cathodes during reactive cathodic arc evaporation

J. Q. Zhu, A. O. Eriksson, N. Ghafoor, M. P. Johansson, G. Greczynski, L. Hultman, J. Rosén, M. Odén

Abstract

The microstructure evolution and compositional variation of Ti3SiC2 cathode surfaces during reactive cathodic arc evaporation are presented for different process conditions. The results show that phase decomposition takes place in the near-surface region, resulting in a 5–50 μm thick converted layer that is affected by the presence of nitrogen in the deposition chamber. This layer consists of two different sublayers, i.e., 1–20 μm thick top layer with a melted and resolidified microstructure, followed by a 4–30 μm thick transition layer with a decomposed microstructure. The converted layer contains a polycrystalline TiCx phase and trace quantities of Si-rich domains with Ti5Si3(C) at their interface. The arc discharge causes Si redistribution in the two regions of the layer, whose Si/(Ti+Si) ratio is higher in the top region and lower in the transition region compared to the virgin material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Linköping University Nanostructured Materials, Department of Physics, Chemistry, and Biology (IFM), , SE-581 83 Linköping, Sweden

Linköping University Thin Film Physics Division, Department of Physics, Chemistry, and Biology (IFM), , SE-581 83 Linköping, Sweden

Linköping University Nanostructured Materials, Department of Physics, Chemistry, and Biology (IFM), , SE-581 83 Linköping, Sweden and , SE-737 82 Fagersta, Sweden

SECO Tools AB Nanostructured Materials, Department of Physics, Chemistry, and Biology (IFM), , SE-581 83 Linköping, Sweden and , SE-737 82 Fagersta, Sweden

References (30)

Show source-provided references
1. Acta Mater. · 2007 · 55 · 635010.1016/j.actamat.2007.07.046 ↗
2. Metall. Mater. Trans. A · 1999 · 30 · 243910.1007/s11661-999-0252-0 ↗
3. Surf. Coat. Technol. · 2008 · 203 · 53810.1016/j.surfcoat.2008.05.019 ↗
4. Thin Solid Films · 2010 · 519 · 139710.1016/j.tsf.2010.08.150 ↗
5. Surf. Coat. Technol. · 2007 · 202 · 82010.1016/j.surfcoat.2007.05.087 ↗
6. 2011
7. Prog. Solid State Chem. · 2000 · 28 · 20110.1016/S0079-6786(00)00006-6 ↗
8. Thin Solid Films · 2010 · 518 · 185110.1016/j.tsf.2009.07.184 ↗
9. J. Phase Equilib. Diffus. · 2004 · 25 · 41510.1007/s11669-004-0132-7 ↗
10. Z. Metallkd. · 2004 · 95 · 5010.3139/146.017911 ↗
11. J. Mater. Sci. · 1994 · 29 · 502310.1007/BF01151093 ↗
12. J. Alloys Compd. · 1999 · 285 · 8510.1016/S0925-8388(99)00003-1 ↗
13. Surf. Coat. Technol. · 1987 · 33 · 15310.1016/0257-8972(87)90185-X ↗
14. IEEE Trans. Plasma Sci. · 1995 · 23 · 100110.1109/27.476489 ↗
15. Surf. Coat. Technol. · 1996 · 81 · 4210.1016/0257-8972(95)02654-1 ↗
16. Mater. Sci. Forum · 1998 · 287–288 · 19310.4028/www.scientific.net/MSF.287-288.193 ↗
17. J. Appl. Phys. · 2003 · 94 · 141410.1063/1.1591079 ↗
18. J. Vac. Sci. Technol. A · 2010 · 28 · 34710.1116/1.3330767 ↗
19. Appl. Phys. Lett. · 2008 · 93 · 14311010.1063/1.2998588 ↗
20. J. Vac. Sci. Technol. A · 2001 · 19 · 218610.1116/1.1378072 ↗
21. Prog. Solid State Chem. · 1971 · 6 · 5710.1016/0079-6786(71)90028-8 ↗
22. Russ. Chem. Rev. · 1996 · 65 · 37910.1070/RC1996v065n05ABEH000217 ↗
23. 2008
24. J. Am. Ceram. Soc. · 2001 · 84 · 228110.1111/j.1151-2916.2001.tb01003.x ↗
25. J. Mater. Sci. · 2001 · 36 · 331310.1023/A:1017963109176 ↗
26. Ber. Bunsenges. Phys. Chem. · 1998 · 102 · 118510.1002/bbpc.19981020922 ↗
27. Mater. Lett. · 2002 · 55 · 6110.1016/S0167-577X(01)00620-6 ↗
28. Physica B · 2006 · 385–386 · 49910.1016/j.physb.2006.05.255 ↗
29. J. Am. Ceram. Soc. · 2008 · 91 · 49410.1111/j.1551-2916.2007.02018.x ↗
30. Acta Mater. · 2007 · 55 · 147910.1016/j.actamat.2006.10.010 ↗