journal article·2006-07-01

Reactive vacuum vapor deposition of aluminum oxide thin films by an air-to-air metallizer

T. Kobayashi, Y. Itoh, Y. Nakano, E. Hirai, R. Hashimoto, S. Kamikawa

Publisher page

Abstract

Reactive vacuum vapor deposition of aluminum oxide thin films by an air-to-air metallizer was examined via the direct simulation Monte Carlo method and experiments. Comparison of the calculated results with the measurements of the Al oxide thin film’s thickness showed (a) that the empirical flux of Al atoms arriving at the substrate is lower than the calculated result, probably due to the formation of Al oxide on the evaporation surface and (b) that the amount of oxygen calculated from the thickness of the film is twice the amount corresponding to the calculated flux, probably due to the effects of the decreased sticking coefficient of oxygen on the evaporating surface and sidewall, underestimated gas phase reaction, large mesh size overestimated film density, and formation of substoichiometric oxide. Aluminum oxide thin films deposited on plastic film substrates by this metallizer under strictly controlled O2 supply conditions have good transparency, an oxygen transmission rate of 2.7cc∕m2day, and an electrical resistivity of 4.4×106Ω2m. Furthermore it was found that the oxygen transmission rate was reduced greatly to 1.0cc∕m2day or less when the Al oxide coating film was laminated with another plastic film using an adhesive.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mitsubishi Heavy Industries, Ltd. , Hiroshima R&D Center, 4-6-22 Kan-on-shin-machi, Nishi-ku, Hiroshima 733-8553, Japan

Meiwa Pax Co., Ltd. , 888-1 Enmyo-cho, Kashiwara, Osaka 582-0027, Japan

Mitsubishi Heavy Industries, Ltd. , Advanced Technology Research Center, 8-1, Sachiura 1-chome, Kanazawa-ku, Yokohama 236-8515, Japan

Mitsubishi-Hitachi Metals Machinery, Inc. , 4-10-1 Shiba, Minato-ku, Tokyo 108-0014, Japan

References (13)

Show source-provided references
1. 1993 · 312
2. 1993 · 278
3. 1995 · 28
4. 1994 · 144
5. 1994 · 203
6. 1992 · 424
7. 1992
8. J. Vac. Soc. Jpn. · 1997 · 40 · 43
9. J. Vac. Sci. Technol. · 1974 · 11 · 66610.1116/1.1312732 ↗
10. 1995 · 95
11. Appl. Opt. · 1985 · 24 · 226710.1364/AO.24.002267 ↗
12. Br. J. Appl. Phys. · 1965 · 16 · 148110.1088/0508-3443/16/10/309 ↗
13. 2005 · 143