journal article·2017-07-01

Chemical composition and properties of MoAl thin films deposited by sputtering from MoAl compound targets

Roland Lorenz, Michael O'Sullivan, Dietmar Sprenger, Bernhard Lang, Christian Mitterer

Publisher page

Abstract

Molybdenum-based thin films are widely used as back-contact layers in solar cells, as interconnect material or diffusion barriers in microelectronics, or as gate and source/drain lines in thin film transistor liquid crystal displays. Within this work, the sputter behavior of three different molybdenum-aluminum compound targets with Al contents of 24, 37, and 49 at. % manufactured by cold gas spraying as well as the chemical composition, the microstructure, and the properties of the deposited thin films have been investigated. The increase in the Al content in the targets results in an increasing deposition rate of the films. The fine-columnar films are characterized by the formation of a body-centered cubic solid solution resulting in an electrical resistivity increasing from 100 μΩ cm for 10 at. % Al to more than 200 μΩ cm for 30 at. % Al. Monte Carlo simulations of sputtering and gas phase transport indicate that the observed large deviations of the chemical compositions of the films with respect to the target are mainly caused by aluminum losses due to gas phase scattering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and devices · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Montanuniversität Leoben Department of Physical Metallurgy and Materials Testing, , Franz-Josef-Straße 18, 8700 Leoben, Austria

Plansee SE , Metallwerk-Plansee-Straße 71, 6600 Reutte, Austria

Funding

Österreichische Forschungsförderungsgesellschaft

References (25)

Show source-provided references
1. Vacuum · 2014 · 99 · 14910.1016/j.vacuum.2013.05.018 ↗
2. Thin Solid Films · 2013 · 528 · 4210.1016/j.tsf.2012.06.087 ↗
3. 2013
4. Thin Solid Films · 2014 · 571 · 110.1016/j.tsf.2014.09.034 ↗
5. 2009
6. Acta Mater. · 2003 · 51 · 437910.1016/S1359-6454(03)00274-X ↗
7. Surf. Coat. Technol. · 2015 · 268 · 7710.1016/j.surfcoat.2014.09.060 ↗
8. J. Therm. Spray. Technol. · 2009 · 18 · 79410.1007/s11666-009-9357-7 ↗
9. Surf. Coat. Technol. · 1999 · 111 · 6210.1016/S0257-8972(98)00709-9 ↗
10. Thin Solid Films · 1991 · 199 · 5910.1016/0040-6090(91)90052-Y ↗
11. J. Appl. Phys. · 2008 · 104 · 06330410.1063/1.2978211 ↗
12. Appl. Surf. Sci. · 2008 · 254 · 639010.1016/j.apsusc.2008.03.179 ↗
13. “Stopping and range of ions in matter,” www.srim.org.
14. Appl. Phys. A · 1984 · 34 · 7310.1007/BF00614759 ↗
15. 2012
16. Nucl. Instrum. Methods, B · 2006 · 243 · 31310.1016/j.nimb.2005.09.018 ↗
17. 2010
18. Thin Solid Films · 1993 · 228 · 5610.1016/0040-6090(93)90563-5 ↗
19. Surf. Coat. Technol. · 1992 · 54–55 · 13110.1016/S0257-8972(09)90039-1 ↗
20. J. Vac. Sci. Technol., A · 2003 · 21 · S11710.1116/1.1601610 ↗
21. 2007
22. J. Phase. Equilib. Diffus. · 2010 · 31 · 49210.1007/s11669-010-9758-9 ↗
23. Surf. Coat. Technol. · 2004 · 179 · 1010.1016/S0257-8972(03)00796-5 ↗
24. Vacuum · 1996 · 47 · 10710.1016/0042-207X(95)00217-0 ↗
25. 2001