Optimization of a plasma immersion ion implantation process for shallow junctions in silicon
Source abstract
Abstract
A plasma immersion ion implantation (PIII) process has been developed for realizing shallow doping profiles of phosphorus and boron in silicon using an in-house built dual chamber cluster tool. High Si etch rates observed in a 5% PH3 in H2 plasma have been ascribed to high concentration of H(α) radicals. Therefore, subsequent work was carried out with 5% PH3 in He, leading to much smaller etch rates. By optical emission spectroscopy, the radical species H(α), PH*2, and PH* have been identified. The concentration of all three species increased with pressure. Also, ion concentrations increased with pressure as evidenced by Langmuir data, with a maximum occurring at 0.12 mbar. The duty cycle of pulsed DC bias has a significant bearing on both the implantation and the etching process as it controls the leakage of positive charge collected at the surface of the silicon wafer during pulse on-time generated primarily due to secondary electron emission. The P implant process was optimized for a duty cycle of 10% or less at a pressure of 0.12 mbar with implant times as low as 30 s. Secondary ion mass spectroscopy showed a P dopant depth of 145 nm after rapid thermal annealing (RTA) at 950 °C for 5 s, resulting in a sheet resistance of 77 Ω/◻. Si n+/p diodes fabricated with phosphorus implantation using optimized PIII and RTA conditions exhibit Jon/Joff > 106 with an ideality factor of nearly 1.2. Using similar conditions, shallow doping profiles of B in silicon have also been realized.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Silicon and Solar Cell Technologies · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Indian Institute of Technology Bombay Department of Electrical Engineering, , Mumbai 400076, India
C.N.R.S./Université de Versailles-St.Quentin Groupe d'Étude de la Matière Condensée, , 45, Avenue des États-Unis, 78035 Versailles Cedex, France
References (18)
Show source-provided references
1. Mater. Sci. Eng., A · 1998 · 253 · 25810.1016/S0921-5093(98)00734-5 ↗
2. Anders · 2000
3. Mater. Sci. Eng.: Rep. · 1996 · 17 · 20710.1016/S0927-796X(96)00194-5 ↗
4. Nucl. Instrum. Methods Phys. Res. B · 1997 · 121 · 21610.1016/S0168-583X(96)00372-2 ↗
5. Appl. Surf. Sci. · 1999 · 138–139 · 22410.1016/S0169-4332(98)00424-3 ↗
6. J. Vac. Sci. Technol., B · 2004 · 22 · 28910.1116/1.1632920 ↗
7. Plasma Source Sci. Technol. · 1992 · 1 · 110.1088/0963-0252/1/1/001 ↗
8. J. Appl. Phys. · 1993 · 74 · 655810.1063/1.355117 ↗
9. J. Vac. Sci. Technol., A · 1995 · 13 · 34910.1116/1.579364 ↗
10. J. Vac. Sci. Technol., B · 2006 · 24 · 239110.1116/1.2353841 ↗
11. Int. J. Adv. Technol. · 2011 · 2 · 4
12. 1998 · 1218
13. IEEE Trans. Plasma Sci. · 2013 · 41 · 164410.1109/TPS.2013.2260771 ↗
14. IEEE Trans. Plasma Sci. · 2013 · 41 · 55310.1109/TPS.2013.2243131 ↗
15. Rev. Sci. Instrum. · 1986 · 57 · 221010.1063/1.1138684 ↗
16. Buschow · 2001 · 2331
17. Curr. Appl. Phys. · 2012 · 12 · 99510.1016/j.cap.2012.01.002 ↗
18. Proc. SPIE · 2006 · 6260 · 62600310.1117/12.676912 ↗