Performance test of a ceramic rotor developed for turbomolecular pumps for fusion use
Source abstract
Abstract
Turbomolecular pumps with a metallic rotor have been widely used to pump out gases from plasma confinement devices. However, high magnetic fields produced by magnet coils and plasmas cause eddy current heating and rotation speed reduction of the rotor of the pumps, and as a result serious problems take place in the rotor strength and pump performance. In order to overcome these problems, the authors have been developing a ceramic turbomolecular pump and, as a first step, have manufactured a test machine. The test machine consists of a ceramic rotor assembly with high electrical resistivity, gas bearings, a gas turbine, and a spiral-groove seal. The ceramic material is silicon nitride. Using the material strength of the actual components, rupture probability of the rotor assembly was estimated at various rotation speeds. Rotational tests of the test machine were successfully performed in both stationary and pulsed magnetic fields (0.046 T and 0.02 T/ms, respectively) at the required speed of 30 000 rpm. The leak rate through the spiral-groove seal was measured for two different seal gaps and at various rotation speeds.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Particle accelerators and beam dynamics · Magnetic confinement fusion research · Plasma Diagnostics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Japan Atomic Energy Research Institute (JAERI), Naka Fusion Research Establishment, Naka-machi, Naka-gun, Ibaraki-ken, Japan
Mitsubishi Heavy Industries, Ltd., 4-6-22, Kan-on-shinmachi, Hiroshima-shi, Japan
References
Reference metadata was not supplied for this record.