Influence of functional groups on properties of styrene grafted NR using glutaraldehyde as curing agent
Source abstract
Abstract
Natural rubber grafted polystyrene (NR‐ g ‐PS) and natural rubber grafted polystyrene‐co‐methyl methacrylate (NR‐ g ‐P(S‐ co ‐MMA)) were prepared by emulsion polymerization technique using tert ‐BuHP‐TEPA as a redox initiator to improve the thermal and mechanical stability of NR. Additional peaks appear in the Fourier‐transform infrared spectra at 695 and 1,732 cm −1 confirms the formation of graft polymerization. The existence of functional groups on the grafted NR was also clearly confirmed from the morphology obtained from transmission electron microscopy analysis. The effect of curing on the mechanical and thermal properties of grafted NR has also been studied. Glutaraldehyde was used as the curing agent for the grafted and ungrafted NRs throughout the entire course of investigation. It was found that curing of grafted NR samples enhanced tensile strength, modulus, hardness, and thermal stability. Grafted NR showed the tensile strength values of 12 and 17 MPa for NR‐ g ‐PS and NR‐ g ‐P(S‐ co ‐MMA), respectively. Enhancement in thermal stability of NR was confirmend from the activation energy of degradation calculated based on thermogravimetric analyzer. The value of activation energy for NR (135.13 kJ/mol) was found to be increased to 147.89 kJ/mol (NR‐ g ‐PS) and 151.6 kJ/mol (NR‐ g ‐P(S‐ co ‐MMA)). The overall properties of NR have been strongly affected by the interaction and chain bundling between functional groups present in the grafted copolymer and the unsaturated chains in its structure. J. VINYL ADDIT. TECHNOL., 25:339–346, 2019. © 2019 Society of Plastics Engineers
Source: crossref · Quality: baseline
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Technology, Faculty of Science Prince of Songkla University Hat‐Yai Thailand
Department of Material Product Technology, Faculty of Agro‐Industry Prince of Songkla University Hat‐Yai Thailand
R&D Center, Department of Physics Rajarajeswari College of Engineering Bangalore India
Funding
National Research Council of Thailand
References (23)
Show source-provided references
1. Tran Anh D. · J. Braz. Chem. Soc. · 2017 · 28 · 669
2. 10.1002/macp.20050025510.1002/macp.200500255 ↗
3. 10.1016/j.eurpolymj.2009.04.00810.1016/j.eurpolymj.2009.04.008 ↗
4. 10.1016/j.eurpolymj.2014.04.00810.1016/j.eurpolymj.2014.04.008 ↗
5. Shin‐ichi I. · J. Appl. Polym. Sci. · 2006 · 103 · 3957
6. Patima B. · J. KKU Res. · 2008 · 6 · 663
7. 10.1002/app.2876510.1002/app.28765 ↗
8. Kitikorn C. · J. Sci. Chula. Univ. · 1998 · 23 · 167
9. 10.14716/ijtech.v6i7.126610.14716/ijtech.v6i7.1266 ↗
10. 10.1007/s10924-012-0531-510.1007/s10924-012-0531-5 ↗
11. 10.1002/pi.311810.1002/pi.3118 ↗
12. 10.1007/s11814-014-0274-110.1007/s11814-014-0274-1 ↗
13. 10.1016/j.eurpolymj.2013.09.00910.1016/j.eurpolymj.2013.09.009 ↗
14. 10.1007/s10965-017-1269-510.1007/s10965-017-1269-5 ↗
15. 10.1002/app.2399710.1002/app.23997 ↗
16. 10.1002/adv.2180610.1002/adv.21806 ↗
17. Ján K. · Chemical Papers. · 2016 · 70 · 1533
18. 10.5254/rct.12.8892010.5254/rct.12.88920 ↗
19. 10.1080/14658011.2017.132361010.1080/14658011.2017.1323610 ↗
20. Wanida Y. · Adv. Environ. Biol. · 2015 · 9 · 14
21. 10.1007/s13726-015-0382-810.1007/s13726-015-0382-8 ↗
22. 10.1016/j.matpr.2018.04.06710.1016/j.matpr.2018.04.067 ↗
23. 10.1002/app.1329410.1002/app.13294 ↗