Modeling of single‐screw extruders with mixing pins: The case of PVC
Source abstract
Abstract
Abstract A computer model is proposed to simulate the flow of molten polymer in the melt conveying zone of extruders provided with mixing pins. This model is based on the calculation of down‐channel velocities within cross sections perpendicular to the flow. A Lagrangian reference frame (i.e. that of the barrel sliding on top of the channel) is used to describe the flow in a convenient manner, the mixing pins being represented as a set of virtual boundary conditions (geometric constraints). The proposed method is compared to a full 3D finite element flow simulation with Newtonian and non‐Newtonian fluids showing a good agreement in term of the pressure drop calculation. Numerical tests are also carried out in the case of a rigid PVC compound used for window profile extrusion. The adequacy found between the predictions and experimental measurements obtained on an industrial extruder confirms the performance of the proposed model.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rheology and Fluid Dynamics Studies · Vibration and Dynamic Analysis · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Miaw C. · SPE ANTEC Tech. Papers · 1991 · 37 · 105
2. 10.1111/j.1751-0813.1979.tb07025.x10.1111/j.1751-0813.1979.tb07025.x ↗
3. 10.3139/217.89023210.3139/217.890232 ↗
4. 10.1002/pen.76022170610.1002/pen.760221706 ↗
5. 10.1080/1040778900894473810.1080/10407789008944738 ↗
6. 10.1002/pen.76024070610.1002/pen.760240706 ↗
7. Viriyayuthakorn M. · SPE ANTEC Tech. Papers · 1984 · 30 · 81
8. C.RauwendaalandA.Muller 5th Annual Meeting of the PPS 71(1989).
9. 10.1002/pen.76034180310.1002/pen.760341803 ↗
10. 10.1002/pen.76018070510.1002/pen.760180705 ↗
11. 10.1002/pen.76023020210.1002/pen.760230202 ↗
12. F.Bertrand P. A.Tanguy andF.Thibault “A New Finite Element Method for Viscous Flow Problems in Enclosures Containing Moving Parts ” submitted toInt. J. Numer. Meth. Fluids.
13. Bäthe K. J. · 1982
14. Agassant J. F. · 1986
15. POLY3DTM Rheotek Inc. Montréal.
16. F.Thibault M.Sc. thesis Laval University Québec Canada (1992).
17. L.Choplin Personal Communication Université Laval Québec Canada (1991).
18. Tadmor Z. · 1970