journal article·2022-02

Physical–mechanical properties and morphology of filled low‐density polypropylene: Comparative study on calcium carbonate with oil shale and coal ashes

Illia Krasnou, Faisal Nadeem, Andre Gregor, Can Rüstü Yörük, Andres Krumme

Publisher page

Abstract

Abstract The main idea of this research is to explore the prospective of ashes accumulated during the energy production to be used as a filler for thermoplastics. The return of waste for processing into secondary raw materials is cost reducing and nature protective. In this study, low‐density polyethylene filled with CaCO 3 , burnt coal, and oil shale ash were produced and scrutinized. The optimal extrusion compounding and injection molding parameters are discussed. The effect of different filler load up to 30 wt% on the mechanical properties, structure, and morphology is investigated. It was found that the processing conditions for ash‐filled compounds are similar to CaCO 3 filled. Mechanical properties such as tensile and impact strength of ash‐filled composites are also close to CaCo 3 filled.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Polymer crystallization and properties · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Polymers and Textile Technology, Department of Material and Environmental Technology Tallinn Technical University Tallinn Estonia

Laboratory of Inorganic Materials, Department of Material and Environmental Technology Tallinn Technical University Tallinn Estonia

Funding

European Regional Development Fund

References (28)

Show source-provided references
1. Kutz M. · 2011 · 455
2. 10.1002/app.2477210.1002/app.24772 ↗
3. Wypych G. · 2016
4. J. R.DyniGeology and Resource of Some World Oil‐shale Deposits USGS Scientific Investigation Report‐5294 2005.10.3133/sir29955294 ↗
5. A.Viikna Composite of Polymeric Material With Mineral Fillers Estonia Patent WO2012083972A1 2010.
6. 10.1166/mex.2014.118710.1166/mex.2014.1187 ↗
7. 10.1007/s11671-007-9074-410.1007/s11671-007-9074-4 ↗
8. 10.1016/j.matdes.2013.09.05510.1016/j.matdes.2013.09.055 ↗
9. 10.1016/j.psep.2009.12.00110.1016/j.psep.2009.12.001 ↗
10. N.Zaichenko V.Nefedov MATEC Web of Conferences 245 2018.10.1051/matecconf/201824503007 ↗
11. Fine Coal Ash Plasticized Pipe Material China Patent CN1110773A 1994.
12. V.Ivar Estonia Patent WO2017/182043Al 2017.
13. 10.1016/j.compositesb.2016.03.00910.1016/j.compositesb.2016.03.009 ↗
14. 10.1016/j.indcrop.2020.11218510.1016/j.indcrop.2020.112185 ↗
15. 10.1016/j.conbuildmat.2012.08.05210.1016/j.conbuildmat.2012.08.052 ↗
16. Mariliis Beger K. · 2018
17. 10.1016/j.polymertesting.2005.05.00810.1016/j.polymertesting.2005.05.008 ↗
18. 10.1002/pen.1140710.1002/pen.11407 ↗
19. 10.1002/app.1983.07028042110.1002/app.1983.070280421 ↗
20. 10.1002/pen.76010021010.1002/pen.760100210 ↗
21. 10.1016/j.vibspec.2017.08.00910.1016/j.vibspec.2017.08.009 ↗
22. 10.1201/978148229546710.1201/9781482295467 ↗
23. 10.1002/sia.290410.1002/sia.2904 ↗
24. 10.1021/jp055063o10.1021/jp055063o ↗
25. Jeyageetha C. J. · Int. J. Sci. Res. · 2013 · 5 · 1688
26. 10.1155/2015/86810910.1155/2015/868109 ↗
27. 10.3390/nano1002020810.3390/nano10020208 ↗
28. 10.1016/j.polymer.2016.09.05910.1016/j.polymer.2016.09.059 ↗