Characterization of Irreversible Fouling after Ultrafiltration of Thermomechanical Pulp Mill Process Water
Source abstract
Abstract
Large volumes of wastewater with dissolved wood components are treated in wastewater treatment plants at thermomechanical pulp mills. It has been shown previously that hemicelluloses in these wastewater streams can be recovered by membrane filtration. A serious obstacle when treating lignocellulose process streams is fouling of the membranes. Fouling not only increases operating costs but also reduces the operating time of the membrane plant. When optimizing the membrane cleaning method, it is important to know which compounds cause the fouling. In this work fouling of an ultrafiltration membrane was studied. The fouling propensity of untreated process water and microfiltrated process water was compared. Fouled membranes were analyzed using scanning electron microscopy and attenuated total reflection Fourier transform infrared spectrometry. Acid hydrolysis of membranes exposed to untreated process water and microfiltration permeate revealed that 508 mg/m2 and 37 mg/m2 of polysaccharides, respectively, remained on the membranes even after alkaline cleaning.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Membrane Separation Technologies · Membrane-based Ion Separation Techniques · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering, Lund University, Lund, Sweden
Department of Environmental Engineering, Technical University of Denmark, Lyngby, Denmark
Department of Chemical Technology, University of Maribor, Maribor, Slovenia
References (28)
Show source-provided references
1. 10.1016/S0144-8617(00)00181-810.1016/S0144-8617(00)00181-8 ↗
2. 10.1016/j.biortech.2012.11.14910.1016/j.biortech.2012.11.149 ↗
3. Willför S. · Tappi J · 2003 · 2 · 27
4. Persson T. · Appl. Biochem. Biotechnol. · 2007 · 137 · 741
5. 10.15376/biores.11.3.Hubbe10.15376/biores.11.3.Hubbe ↗
6. 10.1016/S0011-9164(02)00215-110.1016/S0011-9164(02)00215-1 ↗
7. 10.1016/j.memsci.2010.11.03210.1016/j.memsci.2010.11.032 ↗
8. 10.1016/j.cherd.2010.04.00210.1016/j.cherd.2010.04.002 ↗
9. 10.1016/j.seppur.2011.09.00610.1016/j.seppur.2011.09.006 ↗
10. 10.1016/j.biortech.2013.05.12910.1016/j.biortech.2013.05.129 ↗
11. Persson T. · Sch. Res. Exch. · 2009
12. 10.1016/j.seppur.2015.06.00110.1016/j.seppur.2015.06.001 ↗
13. 10.1016/j.watres.2008.12.04410.1016/j.watres.2008.12.044 ↗
14. 10.1016/0011-9164(89)85033-710.1016/0011-9164(89)85033-7 ↗
15. 10.1016/j.cherd.2015.12.00310.1016/j.cherd.2015.12.003 ↗
16. 10.1016/S0376-7388(03)00047-410.1016/S0376-7388(03)00047-4 ↗
17. 10.1016/j.memsci.2004.07.03010.1016/j.memsci.2004.07.030 ↗
18. Ruiz R. · 1996
19. 10.1016/j.memsci.2015.03.01010.1016/j.memsci.2015.03.010 ↗
20. Käyhkö, J. The Influence of Process Conditions on the Deresination Efficiency in Mechanical Pulp Washing. Ph.D. Thesis, Lappeenranta University of Technology, Department of Chemical Technology, Lappeenranta, Finland, 2002.
21. 10.1016/j.cej.2013.03.08910.1016/j.cej.2013.03.089 ↗
22. 10.1016/j.memsci.2006.04.01410.1016/j.memsci.2006.04.014 ↗
23. 10.1021/jp066882r10.1021/jp066882r ↗
24. 10.1016/j.seppur.2016.09.03310.1016/j.seppur.2016.09.033 ↗
25. 10.12989/mwt.2012.3.1.03510.12989/mwt.2012.3.1.035 ↗
26. McCutcheon, J. R.; Hoek, E. M. V.; Bui, N.; Lind, M. L. Nanostructured Membranes for Engineered Osmosis Applications. Google Patents, US 20130105395 A1. http://www.google.com/patents/US20130105395 2013. (Accessed on 6 April 2016).
27. 10.1039/c3ra00070b10.1039/c3ra00070b ↗
28. Sjöström E. · 1993