Wood friction characteristics during exposure to high pressure: influence of wood/metal tool surface finishing conditions
Source abstract
Abstract
Friction that arises during processing for the deformation of wood under relatively high pressure levels (ca. >1 MPa) is an important factor to be taken into account when wood is processed. However, few studies on such friction have been published. The present study was undertaken to evaluate the influence of surface finishing conditions on the nominal friction coefficient (μ) of the wood and metal tool surfaces. Sticking friction was likely to arise on a relatively coarse metal surface, and the type of metal tool surface finishing was found to have large impact on the friction mechanism. The friction characteristics during exposure to high pressure seem to be affected not only by the interface contact characteristics, but also by the deformation characteristics of wood during compressive load or measurement. The value of μ on water-saturated wood was equal or higher than that on dry wood, which suggests that the contact characteristics between these two types of wood are significantly different. The water content in wood was shown to affect both the interface contact and deformation characteristics of wood. The value of μ was not significantly affected by the wood surface finishing conditions; however, changes in μ during sliding differed slightly, depending on the finishing conditions.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Tunneling and Rock Mechanics · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Suzuki M (1970) Studies on physical properties of wooden surface. I. Relationship between feeling of touch of fingers and frictional coefficient by sliding the models of human skin on surface of wood and other materials (in Japanese). Bull Gov For Exp Stn 231:1–25
2. Murase Y, Ota M (1973) Studies on the frictional characteristics of wood. I. the explanation based on the adhesion component and deformation component (in Japanese). Mokuzai Gakkaishi 19:421–425
3. Murase Y, Ota M (1974) Studies on the frictional characteristics of wood. II. Frictional components of wood (in Japanese). Mokuzai Gakkaishi 20:243–249
4. Murase Y (1977) Effect of surface roughness on friction between wood and steel (in Japanese). Mokuzai Gakkaishi 23:76–81
5. Murase Y (1978) Effects of surface roughness of steel and wood variables on repeated friction between wood and steel (in Japanese). Mokuzai Gakkaishi 24:865–872
6. Murase Y (1979) Effect of temperature on friction between wood and steel (in Japanese). Mokuzai Gakkaishi 25:264–271
7. Murase Y (1980) Frictional properties of wood at sliding speed (in Japanese). Mokuzai Gakkaishi 26:61–65
8. Murase Y (1980) Coefficient of friction and surface temperature in the sliding friction between wood and steel (in Japanese). Mokuzai Gakkaishi 26:571–575
9. Okamoto T (2003) Recent developments in wood/plastic composites. Extrusion of wood-based materials (in Japanese). Mokuzai Gakkaishi 49:401–407
10. Yamashita O, Yokochi H, Miki T, Kanayama K (2008) Forming of rotary-cut Japanese cedar veneer by taking advantage of its fluidity. J Jpn Soc Technol Plasticity 49:53–57
11. Norimoto M (1994) Transverse compression of wood and its application to wood processing (in Japanese). Mokuzai Kenkyu Shiryo 30:1–15
12. Bowden FP, Tabor D (1954) The friction and lubrication of solids. Maruzen, Tokyo, pp 82–85, 158–159
13. Guan N, Thunell B, Lyth K (1983) On the friction between steel and some common Swedish wood species. Eur J Wood Wood Prod 41:55–6010.1007/BF02612232 ↗
14. Mckenzie WM, Karpovich H (1968) The frictional behavior of wood. Wood Sci Technol 2:139–15210.1007/BF00394962 ↗
15. Bowden FP, Tabor D (1954) The friction and lubrication of solids. Maruzen, Tokyo pp, pp 95–100