journal article·2018-10Open access

Pore structure and the properties of electric double layer capacitor electrode of bamboo-derived activated carbon prepared by superheated steam

Keisuke Kikuchi, Rie Yamashita, Satoshi Sakuragawa, Keigo Hasumi, Yasuhiro Mukai, Hiroya Kobayakawa, Shojiro Wakabayashi, Yukie Saito

Journal of Wood Science· Volume 64· Issue 5

Abstract

Bamboo-derived activated carbon prepared by superheated steam (BAC) exhibited performance for utilization as an electric double layer capacitor (EDLC) electrode. Pore structure and EDLC performances were investigated by comparison with phenol resin-derived activated carbon (MSP-20), which is commercially available and often used for the purpose. The nitrogen adsorption isotherm showed that BAC had a large BET-specific surface area of 1268 g/m² with a developed pore structure, especially of the mesopore, in comparison with MSP-20. It is considered that inherent ash in bamboo promoted activation, in addition to physical activation by superheated steam. Capacitance per electrode volume (CV) was 52 F/cm³ with BAC. Because the density of BAC is high (0.78 g/cm³) compared with that of MSP-20 (0.58 g/cm³), sufficient CV for usage was obtained, although the capacitance per electrode mass (CM) at 5 mA/cm² itself of BAC (67 F/g) was lower than that of MSP-20 (126 F/g). With IR drop, the resistance value of BAC (9.7 Ω) was lower than that of MSP-20 (10.5 Ω). Especially, the diffusion resistance of BAC disclosed to be smaller than that of MSP-20. These results indicated that BAC produced by steam activation is a promising material with a pore structure suitable for ion transfer in EDLC.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Kojima A, Ogawa T, Fujishige M, Kamiishi Y (2007) Preparation of activated carbons from cocoon (in Japanese). J Silk Sci Tech Jpn 16:39–44
2. Hirose T, Kushibiki M (2011) Effect of activated temperature on characteristics of activated carbon from pruned apple branches (in Japanese). Mokuzai Gakkaishi 57:136–14210.2488/jwrs.57.136 ↗
3. Hayashi J, Muroyama K, Yabuno M, Otani T (2000) Preparation of activated carbon from food waste by chemical activation with K2CO3 (in Japanese). Environ Sci 13:632–635
4. Abe I, Iwasaki S, Asami K, Senda J (2003) Preparation of activated carbon from bamboo (Phyllostachys pubescens Mazel ex Houzeau de Lehaie) by carbonization and activation with steam, carbon dioxide, or air (in Japanese). TANSO 208:114–11910.7209/tanso.2003.114 ↗
5. Abe I, Hasegawa T, Shibutani Y, Iwasaki S (2004) Pore structural properties of bamboo charcoals (in Japanese). TANSO 215:241–24510.7209/tanso.2004.241 ↗
6. Iwasaki S, Hasegawa T, Ohya K, Shibutani Y, Abe I (2005) Effect of shape and size of raw material in preparation of microporous carbon materials from bamboo (Phyllostachys pubescens Mazel ex Houzeau de Lehaie) (in Japanese). TANSO 220:270–27510.7209/tanso.2005.270 ↗
7. Liu Q, Zheng T, Wang P, Guo L (2010) Preparation and characterization of activated carbon from bamboo by microwave-induced phosphoric acid activation. Ind Crops Prod 31:233–23810.1016/j.indcrop.2009.10.011 ↗
8. Ahmad AA, Hameed HB (2010) Effect of preparation condition of activated carbon from waste for real textile wastewater. J Hazard Mater 173:487–49310.1016/j.jhazmat.2009.08.111 ↗
9. Wang L (2012) Application of activated carbon derived from ‘waste’ bamboo culms for the adsorption of azo disperse dye: kinetic, equilibrium and thermodynamic studies. J Environ Manag 102:79–8710.1016/j.jenvman.2012.02.019 ↗
10. Wu Y, Jin XJ, Zhang J (2013) Characteristics of nitrogen-enriched activated carbon prepared from waste medium density fiberboard by potassium hydroxide. J Wood Sci 59:133–14010.1007/s10086-012-1312-4 ↗
11. Dobashi A, Shu Y, Hasegawa T, Maruyama J, Iwasaki S, Shen Y, Uyama H (2015) Preparation of activated carbon by KOH activation from amygdalus pedunculata shell and its application for electric double-layer capacitor. Electrochemistry 83:351–35310.5796/electrochemistry.83.351 ↗
12. Kikuchi K, Yamashita R, Sakuragawa S (2012) Effects of activation with CO2/KOH on the pore structures of coffee grounds-derived carbon. Trans Mat Res Soc Jpn 37:557–56210.14723/tmrsj.37.557 ↗
13. Kikuchi K, Yasue T, Yamashita R, Sakuragawa S, Sudoh M, Itagaki M (2013) Double layer properties of spent coffee grounds-derived carbon activated with potassium hydroxide (KOH). Electrochemistry 81:828–83210.5796/electrochemistry.81.828 ↗
14. Kim Y, Lee B, Suezaki H, Chino T, Abe Y, Yanagiura T, Park CK, Endo M (2006) Preparation and characterization of bamboo-based activated carbons as electrode materials for electric double layer capacitors. Carbon 44:1581–161610.1016/j.carbon.2006.01.028 ↗
15. Ito E, Sano T, Kouchi I, Okuda M, Nakano T, Umemura M, Niwa Y, Yashio M, Azuma Y, Yamaji Y, Toyoda M, Inagaki M (2007) Preparation of porous carbons from cypress using super-heated steam. I. Carbonization furnace and its characteristics (in Japanese). TANSO 229:249–25410.7209/tanso.2007.249 ↗
16. Ito E, Yokoi T, Inagaki M (2007) Preparation of porous carbons from cypress using super-heated steam. II. Pore structure of carbonized products (in Japanese). TANSO 229:255–26010.7209/tanso.2007.255 ↗
17. Kikuchi K, Yasue T, Yamashita R, Sakuragawa S, Sudoh M, Itagaki M (2013) Electric double layer capacitor using spent coffee grounds-derived activated carbon prepared by steam activation. In: Proceedings of 11th international conference on ecomaterials, pp 55–58
18. Kikuchi K, Yamashita R, Sakuragawa S, Saeki T, Oikawa K, Kume T (2017) Pore structure and chemical composition of activated carbon derived from composted spent coffee grounds. TANSO 278:118–12210.7209/tanso.2017.118 ↗
19. Wakisaka H, Miyake H, Kawahara Y (2006) Preparation of activated carbon from bamboo (Phyllostachys heterocycla) and influence of potassium fraction on activation process (in Japanese). TANSO 224:272–27510.7209/tanso.2006.272 ↗
20. Yamashita N, Machida M, Aikawa M, Tatsumoto H (2009) Preparation of porous bamboo carbon by low-temperature activation in air (in Japanese). Mokuzai Gakkaishi 55:299–30410.2488/jwrs.55.299 ↗
21. Brunauer S, Emmett HP, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60:309–31910.1021/ja01269a023 ↗
22. Horvath G, Kawazoe K (1983) Method for the calculation of effective pore size distribution in molecular sieve carbon. J Chem Eng Jpn 16:470–47510.1252/jcej.16.470 ↗
23. Barrett PE, Joyner GL, Halenda PP (1951) The determination of pore volume and area distributions in porous substances. I. computations from nitrogen isotherm. J Am Chem Soc 73:373–38010.1021/ja01145a126 ↗
24. Kouzu M, Haba E, Takei K (2008) High performance activated carbon for electric double layer capacitor (in Japanese). Hitachi Chem Tech Rep 51:13–16
25. Marsh H, Rodríguez-Reinoso F, Kawashita Y (2011) Activated carbon translated by Hayashi M, Kawashita Y (in Japanese). Maruzen Publishing, Tokyo, pp 220–223
26. Hirose T, Kikuchi T, Kushibiki M (2012) Properties of acid-washed activated carbon from pruned apple branches (in Japanese). Mokuzai Gakkaishi 58:63–6810.2488/jwrs.58.63 ↗
27. Wang L, Inagaki M, Toyoda M (2009) Contributions of micropores and mesopores in electrode carbon to electric double layer capacitance (in Japanese). TANSO 240:230–23810.7209/tanso.2009.230 ↗