journal article·2015-08Open access

Recent research and development on sugi (Japanese cedar) structural glued laminated timber

Tomoyuki Hayashi, Atsushi Miyatake

Journal of Wood Science· Volume 61· Issue 4

Abstract

Sugi (Japanese cedar: Cryptomeria japonica) is the most important afforestation species in Japan. Its growing stock has been increasing year by year. Thus, development of new wood products made of sugi has been a national priority for more than two decades. Development of sugi structural glued laminated timber (glulam) was one of the responses to this push. However, in the 1990s, the Japanese glued laminated timber (GLT) industry did not accept sugi as a raw material for glulam, because several problems existed in the wood quality of sugi such as lower strength properties than those of the major imported species. This drawback spurred intensive research on sugi glulam in Japan. The results contributed to the significant revision of the Japanese Agricultural Standard (JAS) for GLT in 2008. The standard permitted the use of various new laminae and products such as a sugi composite GLT beams using different species of laminae with high modulus of elasticity. Although fireproof GLT is not part of the existing JAS for GLT, several fireproof laminated products with 1-h fireproofing performance have been developed since the Japanese Building Standards Law was revised in 2000.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Urban and spatial planning

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Forestry Agency (2015) Statistics directory of forest and forestry 2014 (in Japanese). pp 8–9
2. Forestry Agency (2014) Forest and forestry white paper 2014:159 (in Japanese)
3. Miyatake A (2009) Utilization of sugi for structural glued laminated timber (in Japanese). Res J Food Agric 34:20–24
4. Japanese Agricultural Standard (2008) JAS for glued laminated timber (in Japanese). pp 1–42
5. Harada T, Kamikawa D, Miyamoto K, Ohuchi T, Miyabayashi M, Ando K, Hattori N (2010) Development of fireproof glued-laminated timber for use in medium-rise building in Japan. In: Cruz (ed) Structure and architecture. Taylor & Francis, London, pp 365–37110.1201/b10428-49 ↗
6. Hayashi T (2004) Recent development in processing technology on engineered wood products in Japan. In: Proceedings of the conference on forestry and forest products research 2003 (CFFPR 2003), 6–8 October 2003, Kuala Lumpur, Malaysia, pp 226–237
7. Forestry and Forest Products Research Institute (2009) Development and evaluation of new structural products using domestic species (in Japanese). FFPRI Grant Res Rep Ser No 23
8. Biblis EJ (1966) Design consideration for laminated wood beams composed of two species. For Prod J 16:39–51
9. Moody RC (1974) Design criteria for large structural glued-laminated timber beams using mixed species of visually graded limber. USDA For Ser Res Pap FPL 236
10. Braun MO, Moody RC (1977) Bending strength of small glulam beams with a laminated-veneer tensile lamination. For Prod J 27:46–51
11. Hayashi T, Miyatake A (1991) Strength properties of sugi composite-glulam beams I (in Japanese). Mokuzai Gakkaishi 37:200–205
12. Hayashi T, Miyatake A, Hoshi T (1992) Strength properties of sugi composite-glulam beams II (in Japanese). Mokuzai Gakkaishi 38:247–255
13. Iijima Y (2011) The trend of glulam production (in Japanese). In: Institute of Wood Technology (ed) Concise encyclopedia of wood. Akita Cultural Publication, Akita, pp 94–95
14. Hiramatsu Y, Fujimoto K, Miyatake A, Shindo K, Nagao H, Kato H, Ido H (2011) Strength properties of glued laminated timber made from edge-glued laminae II: bending, tensile, and compressive strength of glued laminated timber. J Wood Sci 57:66–7010.1007/s10086-010-1127-0 ↗
15. Fujimoto K, Hiramatsu Y, Miyatake A, Shindo K, Karube M, Harada M, Ukyo S (2010) Strength properties of glued laminated timber made from edge-glued laminae I: strength properties of edge-glued karamatsu (Larix kaempferi) laminae. J Wood Sci 56:444–45110.1007/s10086-010-1134-1 ↗
16. Onishi Y, Miyatake A, Hiramatsu Y (2008) Strength properties of sugi LVL as a lamina of glulam. Abstract of the 58th annual meeting of the Japan Wood Res Soc, Tsukuba, p 24
17. Tabuchi A, Tsuchiya Y, Nagao H, Kato H, Ido H (2007) Strength properties of sugi composite glulam using Quercas LVL. Abstract of the 57th annual meeting of the Japan Wood Res Soc, Hiroshima, p 20
18. Foschi RO, Barrett JD (1980) Glued-laminated beam strength: a model. J Struct Div 106:1735–175410.1061/JSDEAG.0005496 ↗
19. Bender DA, FE Woeste, EL Schaffer, CM Marx(1985) Reliability formulation for the strength and fire endurance of glued-laminated beams. USDA For Serv Res Pap FPL 460
20. Komatsu K (1997) Prediction of maximum bending moment of glulam beam composed of arbitrary laminae and verification by experimental results (in Japanese). Mokuzai Gakkaishi 43:934–939
21. Hayashi T (1990) Performance prediction of wood laminates by a probabilistic model IV (in Japanese). Mokuzai Gakkaishi 36:812–818
22. Hayashi T (1991) Performance prediction of wood laminates by a probabilistic model V (in Japanese). Mokuzai Gakkaishi 37:904–911
23. Hayashi T, Itagaki N, Oguro S, Nakajima Y, Machida H (2002) Prediction of bending strength of sugi medium dimension glulam beams by Monte Carlo simulation (in Japanese). J Soc Mater Sci Jpn 51:373–37810.2472/jsms.51.373 ↗
24. Hirashima Y, Yamamoto Y, Suzuki S (1994) Modeling for the strength of glulam beams and for their probabilistic distributions (in Japanese). Mokuzai Gakkaishi 40:1172–11795
25. Mihashi H, Itagaki N, Ito Y, Suzuki N (1996) Analytical model for the design of performance in glulam beams of Japanese ceder I (in Japanese). Mokuzai Gakkaishi 42:122–129
26. Mori T, Isoda H, Sasagawa A (2001) The proposal of the model for estimating the flexural strength of the glulam beam and verification by experimental results (in Japanese). J Struct Constr Eng Trans AIJ 541:51–5710.3130/aijs.66.51_2 ↗
27. Taylor SE, Bender DA (1989) A method for simulating multiple correlated lumber properties. For Prod J 39(7/8):71–74
28. Koseki M, Nakamura N (2012) Estimation of the strength distribution of elements for laminated veneer lumber by a nonlinear least-squares method (in Japanese). Mokuzai Gakkaishi 58:125–13610.2488/jwrs.58.125 ↗
29. Okabe M, Yasumura M, Kobayashi K, Fujita K (2014) Prediction of bending stiffness and moment carrying capacity of sugi cross-laminated timber. J Wood Sci 60:49–5810.1007/s10086-013-1377-8 ↗
30. Yusa S, Masuda K, Kawai T, Ohnuki T, Uesugi S, Namiki Y (2003) Fire resistance on hybrid wooden structure. Part 1. Experimental method on fire proof structural elements (in Japanese). Proc Jpn Assoc Fire Sci Eng Annu Symp, Tokyo, pp 106–109
31. Oka H, Ohashi H, Yamaguchi J, Hori N (2008) A study on self-charring-stop of glued laminated timber made of Japanese cedar installing mortar piece (in Japanese). Bull Jpn Assoc Fire Sci Eng 58:13–20
32. Harada T, Hattori N, Ando K, Miyabayashi M (2007) Fire-resistance of fire-retardant impregnated laminated lumber. Proceedings of 11th international fire science and engineering conference, London, No. 1, pp 765–770
33. Hattori N, Ida A, Kitayama S, Noguchi M (1991) Incising of wood with a 500 watt carbon-dioxide laser. Mokuzai Gakkaishi 37:766–768
34. Ishikawa T, Itagaki N, Harada K, Hasemi Y, Nakamura N, Okazaki Y, Hayashi T, Iijima Y (2014) Examination of a proper size of the burning margin in fire resistant wooden beam of a self-charring stop type part 2. Study of a beam with large height of a section. Summaries of technical papers of annual meet of Architectural Institute of Japan, Kinki, No. 3123, pp 277–278