journal article·2021-12Open access

Mechanical performance of aluminum reinforced wood plastic composites under axial tension: an experimental and numerical investigation

Longlong Zhao, Fei Xi, Xiaorui Wang

Journal of Wood Science· Volume 67· Issue 1

Abstract

Abstract Wood plastic composites (WPCs) are low-cost biomass composite materials with good mechanical stability and good weather resistance that are mainly used in the areas with low stress levels. Aimed at improving the mechanical properties of WPCs, this paper proposes a new WPC reinforced with aluminum. The WPC and aluminum were hot pressed to form an aluminum reinforced wood plastic composites (A-WPC). The axial tensile properties, stress–strain relationship, and failure mechanism of the composite were studied experimentally. The results show that the ultimate stress and strain, elastic modulus, and other mechanical parameters of A-WPCs are much higher than those of WPCs. The elongation at break is 10.13 times that of WPCs, which greatly improves the ductility. Based on the equivalent stiffness theory, two calculation models were proposed to predict the tensile stress–strain relationship of A-WPCs. The tensile rebound process of A-WPCs was analyzed in depth, and then the calculation formula of the residual curvature was deduced to compare with the test results. The experimental results are in good agreement with the calculation results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Cellular and Composite Structures · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Li G, Lao W, Qin T, Huang L (2015) Rapid determination of biomass and polypropylene in three types of wood plastic composites (WPCs) using FTIR spectroscopy and partial least squares regression (PLSR). Holzforschung 69:339–404
2. Basalp D, Tihminlioglu F, Sofuoglu SC, Inal F, Sofuoglu A (2020) Utilization of municipal plastic and wood waste in industrial manufacturing of wood plastic composites. Waste Biomass Valori 11:5419–543010.1007/s12649-020-00986-7 ↗
3. Rowell RM (2007) Challenges in biomass-thermoplastic composites. J Polym Environ 15(4):229–23510.1007/s10924-007-0069-0 ↗
4. Rimdusit S, Wongsongyot S, Jittarom S, Tiptipakorn SS (2011) Effects of gamma irradiation with and without compatibilizer on the mechanical properties of polypropylene/wood flour composites. J Polym Res 18:801–80910.1007/s10965-010-9477-2 ↗
5. Migneault S, Koubaa A, Erchiqui F, Chaala EK, Wolcott, (2009) Effects of processing method and fiber size on the structure and properties of woodplastic composites. Compos A Appl Sci Manuf 40(1):80–8510.1016/j.compositesa.2008.10.004 ↗
6. Kumari R, Ito H, Takatani M, Uchiyama M, Okamoto T (2007) Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite. J Wood Sci 53:470–48010.1007/s10086-007-0889-5 ↗
7. Lin H, Li R, Li D, Huang Z, Pang J, Zhang X, Liu W, Yang W (2020) Hydrophobic wood flour derived from a novel p -TsOH treatment for improving interfacial compatibility of wood/HDPE composites. Cellulose 27:4053–406510.1007/s10570-020-03046-4 ↗
8. Petchwattana N, Covavisaruch S (2014) Mechanical and morphological properties of wood plastic biocomposites prepared from toughened poly(lactic acid) and rubber wood sawdust (Hevea brasiliensis). J Bionic Eng 11:630–63710.1016/S1672-6529(14)60074-3 ↗
9. Tao Q, Yu D, Gao H, Wang Y (2012) Polylactide-based wood plastic composites toughened with SBS. Polym-Plast Technol 51:193–19810.1080/03602559.2011.618518 ↗
10. Perisic SD, Radovic I, Petrovic M, Marinkovic A, Radojevic V (2017) Processing of hybrid wood plastic composite reinforced with short PET fibers. Mater Manuf Process 33:572–57910.1080/10426914.2017.1364854 ↗
11. Panaitescu DM, Nicolae CA, Gabor AR, Trusca R (2020) Thermal and mechanical properties of poly(3-hydroxybutyrate) reinforced with cellulose fibers from wood waste. Ind Crop Prod 145:11207110.1016/j.indcrop.2019.112071 ↗
12. Vaentsi O, Kaerki T (2014) Utilization of recycled mineral wool as filler in wood-polypropylene composites. Constr Build Mater 55:220–22610.1016/j.conbuildmat.2014.01.050 ↗
13. Valente M, Sarasini F, Marra F, Tirillo J (2011) Pulci G (2011) Hybrid recycled glass fiber/wood flour thermoplastic composites: manufacturing and mechanical characterization. Compos Part Aappl S 42(6):649–65710.1016/j.compositesa.2011.02.004 ↗
14. Almaadeed MA, Kahraman R, Khanam PN, Madi N (2012) Date palm wood flour/glass fibre reinforced hybrid composites of recycled polypropylene: mechanical and thermal properties. Mater Design 42:289–29410.1016/j.matdes.2012.05.055 ↗
15. Chen J, Teng ZY, Wu JJ (2017) Recycling of waste FRP and corn straw in wood plastic composite. Polym Compos 38:2140–214510.1002/pc.23789 ↗
16. ASTM D 143-14 (2014) Standard test methods for small clear specimens of timber. ASTM International, Pennsylvania
17. ASTM E8/E8M-16a (2016) Standard test methods for tension testing of metallic materials. ASTM International, Pennsylvania