Influence of welded depth and CuCl2 pretreated dowels on wood dowel welding
Source abstract
Abstract
This study examined the influence of welded depth and CuCl₂ pretreated dowels on wood dowel welding. In untreated group without pretreatment (group A), test results indicated that welded depth 40 mm exhibited higher pullout resistance than the other welded depths. In the same welded depth of 30 mm, specimens with dowels immersed in CuCl₂ solution for 30 min (group B) exhibited the highest pullout resistance than the other specimens. According to the failure behavior, the pullout resistance of group B was considered to be the maximum theory pullout resistance in the welded depth of 30 mm. Weibull distribution could be applied reasonably to analyze pullout resistance of different welded depth. The linear simulation and Eckelman formula could not fit the relation of pullout resistance and welded depth. While the nonlinear simulation of sine function could fit the relation accurately. Based on the Weibull distribution, 95% reliability pullout resistance was calculated. The nonlinear simulation of sine function also existed between 95% reliability pullout resistance and welded depth. The temperature difference of group A-30 and group B was tested to study the reason of different pullout resistance. Both of the two groups, the temperature of point 1 was the highest, and the point 3 was the lowest. The pullout resistance was affected significantly by the temperature of point 2 and 3. For point 1, 260 °C was an excessive temperature, while 224.3 °C was the better choice for welding in this study.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Mechanical Behavior of Composites · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.