journal article·2018-04Open access

Stochastic model for predicting the bending strength of glued-laminated timber based on the knot area ratio and localized MOE in lamina

Sung-Jun Pang, Jung-Kwon Oh, Jung-Pyo Hong, Sang-Joon Lee, Jun-Jae Lee

Journal of Wood Science· Volume 64· Issue 2

Abstract

The aim of this study was to develop a stochastic model for predicting the bending strength distribution of glued-laminated timber (GLT). The developed model required the localized modulus of elasticity (MOE) and tensile strengths of laminae as input properties. The tensile strength was estimated using a regression model based on the localized MOEs and knot area ratios (KAR) which were experimentally measured for lamina grades samples. The localized MOE was obtained using a machine stress-rated grader, and the localized KAR was determined using an image-processing system. The bending strength distributions in four types of GLTs were simulated using the developed GLT beam model; these four types included: (1) GLT beams without finger joints; (2) GLT beams with finger joints; (3) GLT beams with different lamina sizes; and (4) GLT beams with different combinations of lamina grades. The simulated bending strength distributions were compared with actual test data of 2.4 and 4.8 m-long GLTs. The Kolmogorov–Smirnov goodness-of-fit tests showed that all of the simulated bending strength distributions agreed well with the test data. Especially, good agreement was shown in the fifth percentile point estimate of bending strength with the difference of approximately 1%.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Materials Engineering and Processing · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Foschi RO, Barrett JD (1980) Glued-laminated beam strength: a model. J Struct Div 106(8):1735–175410.1061/JSDEAG.0005496 ↗
2. Hernandez R, Bender DA, Richburg BA, Kline KS (1992) Probabilistic modeling of glued-laminated timber beams. Wood Fiber Sci 23(3):294–306
3. Lee JJ, Park JS, Kim KM, Oh JK (2005) Prediction of bending properties for structural GLT using optimized distributions of knot characteristics and laminar MOE. J Wood Sci 51(6):640–64710.1007/s10086-005-0704-0 ↗
4. Fink G, Frangi A, Kohler J (2014) Modelling the bending strength of glued-laminated timber—using machine-grading indicators. In: Proceeding of international network on timber engineering research, meeting 47, pp 371–374
5. Kandler G, Fussl J, Serrano E, Eberhardsteiner J (2015) Effective stiffness prediction of GLT beams based on stiffness distributions of individual lamellas. Wood Sci Technol 49(6):1001–112110.1007/s00226-015-0745-5 ↗
6. Serrano E (2003) Mechanical performance and modelling of GLT. In: Thelandersson S, Larsen HJ (eds) Timber engineering. Wiley, Chichester, pp 67–79
7. Bender DA, Woeste FE, Schaffer EL, Marx CM (1985) Reliability formulation for the strength and fire endurance of glued laminated beams. Research paper FPL460. Forest Products Laboratory, Madison
8. Serrano E, Gustafsson J, Larsen HJ (2001) Modeling of finger-joint failure in glued laminated timber beams. J Struct Eng 127(8):914–92110.1061/(ASCE)0733-9445(2001)127:8(914) ↗
9. Mihashi H, Itagaki N (1998) Probabilistic design of performance in glued laminated timber. In: PROBAMAT-21st Century: probabilities and materials, pp 333–34510.1007/978-94-011-5216-7_18 ↗
10. Nakamura N, Fujita K (2011) Simulation method to generate the strength of GLT using correlated random variables. J Wood Sci 57(3):203–20710.1007/s10086-010-1157-7 ↗
11. Forest Products Society (1997) Machine-graded lumber. Madison, WI: Forest Products Society. Wood Design Focus 8(2):1–24
12. West Coast Lumber Inspection Bureau (2004) Tension/Bending ratios of machine stress-rated lumber. Technical Report No. 2:8
13. Barrett JD, Jones ED, Lau W (1994) Canadian lumber properties. Canadian Wood Council, Ottawa, p 81
14. Kim BN, Lee HW, Kim KM (2009) The development of image processing system using area camera for feeding lumber. J Korean Wood Sci Technol 37(1):37–47
15. Kim BN, Kim KM, Shim KB, Lee HW, Shim SR (2009) The verification of image merging for lumber scanning system. J Korean Wood Sci Technol 37(6):556–565
16. ASTM D3737 (2008) Standard practice for establishing allowable properties for structural glued laminated timber (Glulam). American Society for Testing and Methods, West Conshohosken
17. Bender DA, Woeste FE (2012) Effect of variability on lumber design values. Frame Build News 24(4):34–39
18. Hoyle RJ, Galligan WL (1979) Characteristic lumber properties for truss research. In: Metal plate wood truss conference proceedings. Forest Products Society, Madison, WI, pp 79–28
19. Australian/New Zealand Standard 4063.1 (2010) Characteristic of structural timber part 1: test methods. Standards New Zealand, Wellington
20. Pirouz DM (2006) An overview of partial least square. Technical report, The Paul Merage School of Business, University of California, Irvine
21. Hoadley RB (2000) Understanding wood: a craftsman’s guide to wood technology. The Taunton Press, Newtown
22. ISO 13910 (2005) Structural timber—characteristic values of strength-graded timber—sampling, full-size testing and evaluation. International Organization for Standardization, Geneva
23. Australian/New Zealand Standard 4063.2 (2010) Characteristic of structural timber part 2: determination of characteristic values. Standards New Zealand, Wellington
24. Barrett JD, Lau W (1994) Canadian lumber properties. Canadian Wood Council, Ottawa
25. KS F 3021 (2013) Structural glued laminated timber. Korean Standards Association, Seoul
26. Moody R, Falk R, Williamson T (1990) Strength of glulam beams-size effects. In: Proceedings of the 1990 international timber engineering conference, pp 176–182
27. Shedlauskas JP, Manbeck HB, Janowiak JJ, Hernandez R, Moody RC, Labosky JrP, Blankenhorn PR (1996) Efficient use of red oak for glued-laminated beams. Trans ASAE 39(1):203–20910.13031/2013.27499 ↗