Characterization of plywood made from heat-treated rubberwood veneers bonded with melamine urea formaldehyde resin
Source abstract
Abstract
Abstract The objective of the study is to evaluate the properties of the plywood made from rubberwood veneers thermally treated at various temperatures. Rotary-peeled rubberwood veneers were thermally treated at 160, 170, 180, and 190 °C under 1 bar pressure. 5-ply plywood panels were produced using melamine urea formaldehyde (MUF) resin as binder. Dimensional stability, i.e., water absorption (WA) and thickness swelling (TS) as well as mechanical properties of the plywood were assessed. The results demonstrated that the dimensional stability of the plywood made from thermally treated rubberwood veneers improved as indicated by lower WA and TS values. The reduction in WA and TS values increased along with treatment temperatures. Darkening in the plywood as a result of heat treatment was observed. Meanwhile, heat treatment at 170 °C and 180 °C resulted in plywood with the highest modulus of rupture (MOR), modulus of elasticity (MOE) and shear strength. However, beyond that temperature, the mechanical strength of the plywood started to decline. Based on the findings in this work it appears that heat treatment of rubberwood veneers at temperatures ranging from 160 to 180 °C could have a potential to improve overall properties of plywood panels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Lignin and Wood Chemistry · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Shigematsu A, Mizoue N, Kajisa T, Yoshida S (2011) Importance of rubberwood in wood export of Malaysia and Thailand. New For 41:179–18910.1007/s11056-010-9219-7 ↗
2. Kittijaruwattana J, Lee SH, Chotikhun A (2022) Evaluation of the knowledge and attitude of using personal protective equipment among rubber farmers in Southern Thailand. Bull Transil Univ Braşov Ser For Wood Indus Agric Food Eng 15:119–130. https://doi.org/10.31926/but.fwiafe.2022.15.64.1.910.31926/but.fwiafe.2022.15.64.1.9 ↗
3. Chotikhun A, Kittijaruwattana J, Salca E-A, Hiziroglu S (2020) Selected physical and mechanical properties of microwave heat treated rubberwood (Hevea brasiliensis). Appl Sci 10:6273. https://doi.org/10.3390/app1018627310.3390/app10186273 ↗
4. Balsiger J, Bahdon J, Whiteman A (2000) The utilization, processing and demand for rubberwood as a source of wood supply (No. 50). Forestry Policy and Planning Division, Rome
5. Umar I, Zaidon A, Lee SH, Halis R (2016) Oil-heat treatment of rubberwood for optimum changes in chemical constituents and decay resistance. J Trop For Sci 28:88–96
6. Hill C, Altgen M, Rautkari L (2021) Thermal modification of wood—a review: chemical changes and hygroscopicity. J Mater Sci 56:6581–6614. https://doi.org/10.1007/s10853-020-05722-z10.1007/s10853-020-05722-z ↗
7. Priadi T, Hiziroglu S (2013) Characterization of heat treated wood species. Mater Des 49:575–582. https://doi.org/10.1016/j.matdes.2012.12.06710.1016/j.matdes.2012.12.067 ↗
8. Esteves B, Pereira H (2009) Wood modification by heat treatment: a review. BioResources 4:370–40410.15376/biores.4.1.Esteves ↗
9. Rowell RM, Ibach RE, McSweeny J, Nilsson T (2009) Understanding decay resistance, dimensional stability and strength changes in heat-treated and acetylated wood. Wood Mat Sci Eng 4:14–2210.1080/17480270903261339 ↗
10. Zdravković V, Lovrić A, Stanković B (2013) Dimensional stability of plywood panels made from thermally modified poplar veneers in the conditions of variable air humidity. Drvna Indus 64:175–18110.5552/drind.2013.1223 ↗
11. Candan Z, Hiziroglu S, McDonald AG (2010) Surface quality of thermally compressed Douglas fir veneer. Mater Des 31:3574–357710.1016/j.matdes.2010.02.003 ↗
12. Kantay R, Unsal O, Korkut S (2003) Investigations of surface roughness of sliced Walnut and Beech veneers produced in Turkey. Rev For Faculty Univ Istanbul Ser A 51:15–31 (in Turkish)
13. Bekhta P, Salca E-A, Lunguleasa A (2020) Some properties of plywood panels manufactured from combinations of thermally densified and non-densified veneers of different thicknesses in one structure. J Build Eng 29:10111610.1016/j.jobe.2019.101116 ↗
14. Murata K, Watanabe Y, Nakano T (2013) Effect of thermal treatment of veneer on formaldehyde emission of poplar plywood. Materials 6:410–42010.3390/ma6020410 ↗
15. Ferreira BS, Arroyo FN, Kondo MY, Santos HFD, Barreto RL, Dias AMPG, Lahr FAR, Christoforo AL, Campos CID (2022) physical and mechanical properties of plywood produced with thermally treated Pinus taeda veneers. Forests 13:139810.3390/f13091398 ↗
16. ASTM D1037-12 (2017) Standard test method for evaluating properties wood-based fiber and particle panel materials. ASTM International, West Conshohocken, PA
17. ISO12466-1:2007 (2009) Plywood-Bonding quality-Part 1: Test methods. International Organization for Standardization, Geneva, Switzerland
18. Chotikhun A, Hiziroglu S (2016) Measurement of dimensional stability of heat treated southern red oak (Quercus falcata Michx.). Measurement 87:99–10310.1016/j.measurement.2016.02.064 ↗
19. Ulker O, Aslanova F, Hiziroglu S (2018) Properties of thermally treated yellow poplar, southern pine, and eastern redcedar. BioResources 13(4):7726–773710.15376/biores.13.4.7726-7737 ↗
20. Aydin I, Colakoglu G (2005) Formaldehyde emission, surface roughness, and some properties of plywood as function of veneer drying temperature. Dry Technol 23:1107–111710.1081/DRT-200059142 ↗
21. Cividini R, Travan L, Allegretti O (2007) White beech: a tricky problem in the drying process, In: International scientific conference on hardwood processing, Québec City, Canada, pp 135–140
22. Salca E-A, Kobori H, Inagaki T, Kojima Y, Suzuki S (2016) Effect of heat treatment on colour changes of black alder and beech veneers. J Wood Sci 62:297–30410.1007/s10086-016-1558-3 ↗
23. Nemeth R, Tolvaj L, Bak M, Alpar T (2016) Colour stability of oil-heat treated black locust and poplar wood during short-term UV radiation. J Photochem Photobiol A 329:287–29210.1016/j.jphotochem.2016.07.017 ↗
24. Bekhta P, Niemz P (2005) Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung 57:539–54610.1515/HF.2003.080 ↗
25. Shi JL, Kocaefe D, Zhang J (2007) Mechanical behaviour of Quebec wood species heat- treated using ThermoWood process. Holz als Roh-und Werkstoff 65(4):255–25910.1007/s00107-007-0173-9 ↗
26. Kubojima Y, Okano T, Ohta M (2000) Vibrational properties of heat- treated green wood. J Wood Sci 46(1):63–6710.1007/BF00779555 ↗
27. Millett MA, Gerhards GC (1972) Accelerated aging: residual weight and flexural properties of wood heated in air at 115 °C to 175 °C. Wood Sci 4:193–201
28. Lee SH, Lum WC, Zaidon A, Maminski M (2015) Microstructural, mechanical and physical properties of post heat-treated melamine-fortified urea formaldehyde-bonded particleboard. Eur J Wood Wood Products 73:607–61610.1007/s00107-015-0924-y ↗
29. Wang X, Chen X, Xie X, Wu Y, Zhao L, Li Y, Wang S (2018) Effects of thermal modification on the physical, chemical and micromechanical properties of Masson pine wood (Pinus massoniana Lamb.). Holzforschung 72:106310.1515/hf-2017-0205 ↗
30. Li W, Zhang Z, He S, Zhou G, Mei C (2020) The effect of lathe checks on the mechanical performance of LVL. Eur J Wood Wood Prod 78:545–55410.1007/s00107-020-01526-9 ↗
31. Bekhta P, Sedliačik J, Bekhta N (2020) Effect of veneer-drying temperature on selected properties and formaldehyde emission of birch plywood. Polymers 12:59310.3390/polym12030593 ↗
32. Christiansen AW (1990) How overdrying wood reduces its bonding to phenol formaldehyde adhesives: a critical review of the literature, part I—physical responses. Wood Fiber Sci 22:441–459
33. Kūliņš L, Meija A, Roziņš R, Liepa KH, Spulle U (2021) Influence of veneer density on plywood thickness and some mechanical properties. Rural Sustain Res 46:66–74