journal article·2024-01-24Open access

A rolling shear analysis-based method for determining the apparent stiffness and bending capacity of CLT panel under out-of-plane load

Zirui Huang, Yuling Bian, Chun Ni

Journal of Wood Science· Volume 70· Issue 1

Abstract

Abstract Most of the currently employed methods, such as Gamma method and shear analogy method, to estimate the bending stiffness and bending capacity of cross-laminated timber (CLT) beams, are computationally extensive. In our previous study, a rolling shear analysis (RSA)-based method, which simplifies the calculation, was developed to determine the shearing capacity of CLT beams. In the present study, the authors expand upon the RSA method to determine the apparent stiffness and bending capacity of 3- and 5-layer CLT beams. By considering the shear deformation of cross layers, simplified formulas to determine the apparent bending stiffness of CLT beam was derived. Two schemes to determine the CLT bending capacity were proposed. One is based on the shear stress analysis, and the other is based on the formula specified in Canadian standard, CSA O86, by replacing the effective stiffness with the apparent stiffness. Test results from the authors and the other researchers were adopted to validate the method. The findings showed that the RSA method, using the apparent stiffness obtained from the proposed method along with the bending capacity formula in CSA O86, can provide a simpler and more reliable estimation of the apparent bending stiffness and bending capacity of CLT beams as compared to the Gamma method and shear analogy method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Wood Treatment and Properties · Bamboo properties and applications · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Perret O, Douthe C, Lebeée A, Sab K (2011) A shear criterion for the buckling analysis of CLT walls. Eng Struct 211:11034410.1016/j.engstruct.2020.110344 ↗
2. CSA O86-4 (2017) Engineering design in wood reprinted in Jun. Canadian Standard Association, SCA Group, Ontario
3. Canadian Wood Council (2017) Wood design manual Ontario Ottawa
4. Karacabeyli E, Doulas B (2011) CLT Handbook. FPInnovations, Quebec
5. Christovasilis IP, Brunetti M, Follesa M, Nocetti M, Vassallo M (2016) Evaluation of the mechanical properties of cross laminated timber with elementary beam theories. Constr Build Mater 122:202–21310.1016/j.conbuildmat.2016.06.082 ↗
6. Flores EIS, Saavedra K, Hinojosa J, Chandra Y, Das R (2016) Multi-scale modelling of rolling shear failure in cross-laminated timber structures by homogenization and cohesive zone models. Int J Solids Struct 81:219–23210.1016/j.ijsolstr.2015.11.027 ↗
7. Franzonia L, Lebée A, Lyon F, Forêt G (2018) Closed-form solutions for predicting the thick elastic plate behavior of CLT and timber panels with gaps. Eng Struct 164:290–30410.1016/j.engstruct.2018.02.073 ↗
8. Ecsedi I, Baksa A (2016) Analytical solution for layered composite beams with partial shear interaction based on Timoshenko beam theory. Eng Struct 155:107–11710.1016/j.engstruct.2016.02.034 ↗
9. Acter ST, Serrano E, Bader TK (2021) Numerical modelling of wood under combined loading of compression perpendicular to the grain and rolling shear. Eng Struct 244:11280010.1016/j.engstruct.2021.112800 ↗
10. Silva JVF, Pereira MCDM, Silva MFF, Molina JC (2023) Experimental and numerical analysis of specimen configurations for cross laminated timber on rolling shear stiffness and strength response. Eng Struct 284:11597310.1016/j.engstruct.2023.115973 ↗
11. Oñate A, Fernándea J, Saavedra K (2023) Numerical simulation on the influence of delamination on the critical buckling load of CLT panels. Eng Struct 286:11620910.1016/j.engstruct.2023.116029 ↗
12. Perret O, Lebée A, Douthe C, Sab K (2018) Experimental determination of the equivalent-layer shear stiffness of CLT through four-point bending of sandwich beams. Constr Build Mater 186:1132–114310.1016/j.conbuildmat.2018.07.102 ↗
13. Hematabadi H, Madhoushi M, Khazaeyan A, Ebrahimi G, Hindman D, Loferski J (2020) Bending and shear properties of cross-laminated timber panels made of poplar (Populus alba). Constr Build Mater 265:12032610.1016/j.conbuildmat.2020.120326 ↗
14. Li X, Ashraf M, Subhani M, Kremer P, Kafle B, Ghabraie K (2020) Experimental and numerical study on bending properties of heterogeneous lamella layups in cross laminated timber using Australian Radiata Pine. Constr Build Mater 247:11852510.1016/j.conbuildmat.2020.118525 ↗
15. Marjanovic M, Markovic N, Damnjanovic E, Cvetkovic R (2020) Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method. Thin-wall Struct 157:10715610.1016/j.tws.2020.107156 ↗
16. Li M, Füssl J, Lukacevic M, Martin CM, Eberhardsteiner J (2019) Bending strength predictions of cross-laminated timber plates subjected to concentrated loading using 3D finite-element-based limit analysis approaches. Compos Struct 220:912–92510.1016/j.compstruct.2019.02.101 ↗
17. Huang Z, Huang D, Chui Y-H, Chen Z (2023) A layered beam-based model for analyzing the stress of rolling shear for the cross-laminated timber panels under out-of-plane bending. Eng Struct 289:11629010.1016/j.engstruct.2023.116290 ↗
18. Huang Z, Huang D, Chui Y-H, Shen Y, Daneshvar H, Sheng B, Chen Z (2022) Modeling of cross laminated-timber (CLT) panels loaded with combined out-of-plane bending and compression. Eng Struct 250:11333510.1016/j.engstruct.2021.113335 ↗
19. EN 1995: 2008–06 (2016) Eurocode 5: Design of timber structures-Part 1–1: General-Common rules and rules for buildings. European Committee for Standardization, Asociación Española de Normalización y Certificación. https://www.astm.org/cgi-bin/resolver.cgi?3PC+UNE+UNE_UNE-EN_1995-1-1+en-US
20. Gagnon S, Pirvu C (2011) CLT Handbook. FPInnovation, Special Publication, Quebec
21. Timoshenko S (1940) Strength of materials, Part I: elementary theory and problems, 2nd edn. D. Van Nostrand C. Inc., New York
22. Crovella P, Simth W, Bartczak J (2019) Experimental verification of shear analogy approach to predict bending stiffness for softwood and hardwood cross-laminated timber panels. Constr Build Mater 229:11689510.1016/j.conbuildmat.2019.116895 ↗
23. Shen Y, Huang Z, Daneshvar H, Chui Y-H, Huang D (2023) Experimental study of CLT panels under combined out-of-plane bending and compression. Eng Struct 275:11526210.1016/j.engstruct.2022.115262 ↗
24. Daniel FL, Violeta GA, María P, Guillermo IG (2022) Cross laminated timber (CLT) manufacture with European oak recovered from demolition: structure properties and no-destructive evaluation. Constr Build Mater 339:12763510.1016/j.conbuildmat.2022.127635 ↗
25. Hojat H, Mehrab M, Abolghasem K, Ghanbar E (2021) Structural performance of hybrid Poplar Beech cross-laminated-timber (CLT). J Build Eng 44:10295910.1016/j.jobe.2021.102959 ↗
26. He M, Sun X, Li Z (2018) Bending and compressive properties of cross-laminated timber (CLT) panels made from Canadian hemlock. Constr Build Mater 185:175–18310.1016/j.conbuildmat.2018.07.072 ↗
27. Navaratnam S, Christopher PB, Ngo T, Le TV (2020) Bending and shear performance of Australia Radiata pine cross-laminated timber. Constr Build Mater 232:11721510.1016/j.conbuildmat.2019.117215 ↗
28. Sikora SK, McPolin DO, Harte AM (2016) Effects of the thickness of cross-laminated timber (CLT) panels made from Irish Sitka spruce on mechanical performance in bending and shear. Constr Build Mater 116:141–15010.1016/j.conbuildmat.2016.04.145 ↗
29. ASTM D198-5 (2015) Standard test methods of static tests of lumber in structural sizes. American Society for Testing and Materials (ASTM), West Conshohocken