Characterization of the effluents condensated by volatile organic compounds during heat-treated rubberwood process
Source abstract
Abstract
Abstract Heat treatment was an eco-friendly modification technology for rubberwood, without the addition of chemical reagents into the wood and wood performance has been improved remarkably. Many effluents are generated from heat-treated rubberwood process, which were rarely researched. The effluents contain relatively high content of volatile organic compounds, which may seriously threaten the environment and human health. In this study, effluents condensated during different heat-treated stages (125 ℃, 145 ℃, 175 ℃, 185 ℃, 215 ℃) and frequently used industrial heat treatment production technology (185 ℃/3 h, 215 ℃/3 h) were characterized by gas chromatography–mass spectrometry (GC–MS). The effluents were classified as aldehydes, phenols, esters, ketones, acids, alcohols, alkanes, anhydride, aromatics and compounds released the most during all heat-treated stages were aldehydes. With the temperature increased, the relative amounts of aldehydes decreased, while the ketones, esters and aromatics increased under acidic constituents (pH ranged from 4.17 to 2.47) and high moisture condition. The vanillin and coniferyl aldehyde accounted for much higher proportion in the aldehydes. The mass loss of rubberwood was larger under 215 ℃/3 h (16.61%), correspondingly the effluents had more kinds of compounds at 215 ℃. These results would provide guidance for research of effluent disposal and transform biomass residues into valuable things.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Biochemical and biochemical processes · Lignin and Wood Chemistry · Essential Oils and Antimicrobial Activity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Li TT, Li GJ, Lu QJ, Zhou JN, Li M, Zhang SX, Li JN (2017) Characterization of tectona grandis extractives by GC–MS and IR and their infusion into rubberwood to modify dimensional stability. BioResources 12:4500–4514. https://doi.org/10.15376/biores.12.3.4500-451410.15376/biores.12.3.4500-4514 ↗
2. Wang YB (2019) The planted area of rubber tree. In: Japan rubber times (ed). https://www.yunken.com/?p=65341. Accessed 9 Jan 2019
3. Kokutse AD, Stokes A, Bailleres H, Kokou K, Baudasse C (2006) Decay resistance of Togolese Teak (Tectona grandis) heartwood and relationship with colour. Trees 20:219–22310.1007/s00468-005-0028-0 ↗
4. Jayashree S, Krishna KP, Prakash GK, Mahadevan KM (2012) Photo bleaching and dimensional stability of rubber wood esterified by fatty acid chlorides. J Wood Chem Technol 32:121–136. https://doi.org/10.1080/02773813.2011.62466510.1080/02773813.2011.624665 ↗
5. Dosdall R, Jülich WD, Schauer F (2015) Impact of heat treatment of the water reed Phragmites communis Trin. used for thatching on its stability, elasticity and resistance to fungal decomposition. Int Biodeterior Biodegrad 103:85–90. https://doi.org/10.1016/j.ibiod.2015.04.01310.1016/j.ibiod.2015.04.013 ↗
6. Gonzalez-Pena MM, Hale MDC (2010) Rapid assessment of physical properties and chemical composition of thermally modified wood by mid-infrared spectroscopy. Wood Sci Technol 45:83–102. https://doi.org/10.1007/s00226-010-0307-910.1007/s00226-010-0307-9 ↗
7. Chu DM, Xue L, Zhang Y, Kang L, Mu J (2016) Surface characteristics of poplar wood with high temperature heat treatment: wettability and surface brittleness. BioResources 11:6948–696710.15376/biores.11.3.6948-6967 ↗
8. Lydia SG, William JA, Sandar B, Walier D, LeBouf R, Hopke PK, Rossner A (2015) VOCs emissions from multiple wood pellet types and concentrations in indoor air. Energy Fuels 29:6485–6493. https://doi.org/10.1021/acs.energyfuels.5b0139810.1021/acs.energyfuels.5b01398 ↗
9. Günther K, Daniel S, Eugenia T, Bernhard L, Martin W, Marius CB, Alexander P (2020) Qualitative investigation on VOC-emissions from spruce (Picea abies) and larch (Larix decidua) loose bark and bark panels. Eur J Wood Wood Prod 78:403–412. https://doi.org/10.1007/s00107-020-01511-210.1007/s00107-020-01511-2 ↗
10. Liu R, Wang C, Huang AM, Lv B (2018) Characterization of odors of wood by gas chromatography–olfactometry with removal of extractives as attempt to control indoor air quality. Molecules 23:203–212. https://doi.org/10.3390/molecules2301020310.3390/molecules23010203 ↗
11. Rugină C, Lupu C, Neamtiu IA, Neagu MC, Dumitraşcu I, Gurzău ES (2011) Environmental health risk assessment of VOC’s. AES Bioflux 3:99–107
12. Izvorni ZR (2018) Comparison of VOC emissions from natural wood and heat treated wood. Drvna Industrija 69:297–30910.5552/drind.2018.1708 ↗
13. Wang C, Wang ZP, Qin Y, Yin XQ, Huang AM (2018) Released volatile organic compounds in southern yellow pine before and after heat treatment. Int J Environ Res Public Health 15:2579–2588. https://doi.org/10.3390/ijerph1511257910.3390/ijerph15112579 ↗
14. Hyttinen M, Weijo MM, Kalliokoski P (2010) Comparison of VOC emissions between air-dried and heat-treated norway spruce (Picea abies), scots pine (Pinus sylvesteris) and european aspen (Populus tremula) wood. Atmos Environ 44:5028–5033. https://doi.org/10.1016/j.atmosenv.2010.07.01810.1016/j.atmosenv.2010.07.018 ↗
15. Chu DM, Zhang XY, Mu J, Avramidis S, Xue L, Li YS (2019) A greener approach to byproducts from the production of heat-treated poplar wood: analysis of volatile organic compound emissions and antimicrobial activities of its condensate. J Clean Prod 213:521–527. https://doi.org/10.1016/j.jclepro.2018.12.16310.1016/j.jclepro.2018.12.163 ↗
16. Srinivas K, Pandey KK (2012) Photodegradation of thermally modified wood. J Photochem Photobiol B 117:140–145. https://doi.org/10.1016/j.jphotobiol.2012.09.01310.1016/j.jphotobiol.2012.09.013 ↗
17. Severo ETD, Calonego FW, Sansígolo CA, Bond B (2016) Changes in the chemical composition and decay resistance of thermally-modified hevea brasiliensis wood. PLoS ONE 11:1353–1362. https://doi.org/10.1371/journal.pone.015135310.1371/journal.pone.0151353 ↗
18. Granstrom K (2003) Emissions of monoterpenes and VOCs during drying of sawdust in a spouted bed. For Prod J 53:48–55. https://doi.org/10.1046/j.1439-0329.2003.00334.x10.1046/j.1439-0329.2003.00334.x ↗
19. Huang WJ, Wu YF, Zhao ZJ, Yi SL, He ZB (2016) Influence of thermal treatment conditions on the release of volatile organic compounds from bamboo. BioResources 11:7296–730410.15376/biores.11.3.7296-7304 ↗
20. Graf N, Haas W, Bödhzelt H (2003) Characterization of gaseous emissions from a small-size industrial plant for thermal wood modification by GC/MS. In: Abstracts of the first European conference on wood modification, Ghent, Belgium, April 2003
21. Doddapaneni TRKC, Praveenkumar R, Tolvanen H, Palmroth MRT, Konttinen J, Rintala J (2017) Anaerobic batch conversion of pine wood torrefaction condensate. Bioresour Technol 225:299–307. https://doi.org/10.1016/j.biortech.2016.11.07310.1016/j.biortech.2016.11.073 ↗
22. Manninena AM, Pasanenb P, Holopainena JK (2002) Comparing the VOC emissions between air-dried and heat-treated Scots pine wood. Atmos Environ 36:1763–176810.1016/S1352-2310(02)00152-8 ↗
23. Yildiz S, Gezer ED, Yildiz UC (2006) Mechanical and chemical behavior of sprucewood modified by heat. Build Environ 41:1762–1766. https://doi.org/10.1016/s1352-2310(02)00152-810.1016/s1352-2310(02)00152-8 ↗
24. Boonstra MJ, Acker VJ, Kegel E, Stevens M (2007) Optimisation of a two-stage heat treatment process: durability aspects. Wood Sci Technol 41:31–57. https://doi.org/10.1007/s00226-006-0087-410.1007/s00226-006-0087-4 ↗
25. Gallage NJ, Møller BL (2015) Vanillin–bioconversion and bioengineering of the most popular plant flavor and its de novo biosynthesis in the vanilla orchid. Mol Plant 8:40–57. https://doi.org/10.1016/j.molp.2014.11.00810.1016/j.molp.2014.11.008 ↗
26. Huang YX, Zhang YM, Qi Y, Yu YL, Yu WJ (2019) Identification of odorous constituents of bamboo during thermal treatment. Constr Build Mater 203:104–110. https://doi.org/10.1016/j.conbuildmat.2019.01.05410.1016/j.conbuildmat.2019.01.054 ↗
27. Pohleven J, Burnard MD, Kutnar A (2019) Volatile organic compounds emitted from untreated and thermally modified wood-a review. Wood Fiber Sci 51(3):231–25410.22382/wfs-2019-023 ↗
28. Conde E, Cara C, Moure A, Ruiz E, Castro E, Domínguez H (2009) Antioxidant activity of the phenolic compounds released by hydrothermal treatments of olive tree pruning. Food Chem 114:806–812. https://doi.org/10.1016/j.foodchem.2008.10.01710.1016/j.foodchem.2008.10.017 ↗
29. Dizhbite T, Telysheva G, Jurkjane V, Viesturs U (2004) Characterization of the radical scavenging activity of lignins—natural antioxidants. Bioresour Technol 95:309–317. https://doi.org/10.1016/j.biortech.2004.02.02410.1016/j.biortech.2004.02.024 ↗
30. Vinardell MP, Ugartondo V, Mitjans M (2008) Potential applications of antioxidant lignins from different sources. Ind Crop Prod 27:220–223. https://doi.org/10.1016/j.indcrop.2007.07.01110.1016/j.indcrop.2007.07.011 ↗