journal article·2018-10Open access

Strain analysis near the cutting edge in orthogonal cutting of hinoki (Chamaecyparis obtusa) using a digital image correlation method

Yosuke Matsuda, Yuko Fujiwara, Yoshihisa Fujii

Journal of Wood Science· Volume 64· Issue 5

Abstract

A digital image correlation (DIC) method was utilized to measure strain distributed within approximately 0.5 mm of the cutting edge during slow-speed orthogonal cutting of air-dried hinoki (Chamaecyparis obtusa), to clarify the relationships of the strain distribution and cutting conditions, including cutting angle ([Formula: see text]) and depth of cut ([Formula: see text]). The strain was measured in 0.04 mm steps, and the measurable minimum strain was approximately 0.08%. Tensile strain of 3% or larger normal to the cutting direction, [Formula: see text], tended to extend 0.2 mm or further ahead of the tool when [Formula: see text] and [Formula: see text]. This tensile [Formula: see text] corresponded to the occurrence of the fore-split in Chip Type I. The tensile [Formula: see text] detected along the path of the cutting edge decreased as [Formula: see text] and/or [Formula: see text] decreased. Positive shear strain, [Formula: see text], tended to be detected ahead of the tool in Type I. Negative [Formula: see text] tended to be detected ahead of the tool in Type II and III [Formula: see text]. These [Formula: see text] values were considered to be related to the elongation and shrinkage of the chip. The study confirmed the usability of the DIC method for the evaluation of cutting conditions and also to classify chip formation into chip types.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Optical measurement and interference techniques · Surface Roughness and Optical Measurements · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Kinoshita N (1984) Analysis of the veneer-formation process III: analysis of cutting stress by the photo elastic coating method (in Japanese). Mokuzai Gakkaishi 30(1):32–37
2. Tochigi T, Tadokoro C (1985) Change of cutting stress in the progression of the dulling of the tool edge. Mokuzai Gakkaishi 31(11):880–887
3. McKenzie WM (1969) Applying grid patterns to wood surfaces using photosensitive lacquers. For Prod J 19(2):43–44
4. McKenzie WM, Karpovich H (1975) Measured strains in slow linear veneer cutting: effects of nosebar form and gap. Wood Sci Technol 9(3):213–23110.1007/BF00364639 ↗
5. Huang Y, Hayashi D (1972) Basic analysis of mechanism in wood-cutting: chip deformation in orthogonal cutting (90 – 0) (in Japanese). Mokuzai Kogyo 27(5):236–239
6. Huang Y, Hayashi D (1973) Basic analysis of mechanism in wood-cutting stress analysis in orthogonal cutting parallel to grain (in Japanese). Mokuzai Gakkaishi 19(1):7–12
7. Triboulot P, Asano I, Ohta M (1983) An application of fracture mechanics to the wood-cutting process. Mokuzai Gakkaishi 29(2):111–117
8. Tochigi T, Hayashi D (1974) Distribution of cutting stress on the rake face of the knife in veneer cutting by restricted knife-veneer contact length method (in Japanese). Mokuzai Gakkaishi (20)11:528–537
9. Sugiyama S (1974) Fundamental studies on mechanism of veneer cutting V: numerical analysis of stress distribution in workpiece during cutting without pressure bar (in Japanese). Mokuzai Gakkaishi 20(6):250–256
10. Sugiyama S (1974) Fundamental studies on mechanism of veneer cutting VI: numerical analysis of stress distribution in workpiece during cutting with sharp bar. Mokuzai Gakkaishi (in Japanese) 20(6):257–263
11. Sugiyama S (1975) Fundamental studies on mechanism of veneer cutting VII: Numerical analysis of stress distribution in workpiece during cutting without pressure bar (2) (in Japanese). Mokuzai Gakkaishi 21(1):15–21
12. Palka LC (1975) Veneer-cutting analysis by an elastic finite-element model: a case study. Wood Sci 8(2):97–104
13. Peters WH, Ranson WF (1982) Digital imaging techniques in experimental stress analysis. Opt Eng 21(3):427–43110.1117/12.7972925 ↗
14. Sutton MA, Wolters WJ, Peters WH, Ranson WF, McNeill SR (1983) Determination of displacements using an improved digital correlation method. Image Vis Comput 1(3):133–13910.1016/0262-8856(83)90064-1 ↗
15. Sutton MA, Orteu JJ, Schreier HW (2009) Image correlation for shape, motion and deformation measurements. Basic concepts, theory and applications. Springer, New York
16. Pan B, Qian K, Xie H, Asundi A (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol. https://doi.org/10.1088/0957-0233/20/6/06200110.1088/0957-0233/20/6/062001 ↗
17. Pan B, Lu Z, Xie H (2010) Mean intensity gradient: an effective global parameter for quality assessment of the speckle patterns used in digital image correlation. Opt Lasers Eng 48:469–47710.1016/j.optlaseng.2009.08.010 ↗
18. Choi D, Thorpe JL, Hanna RB (1991) Image analysis to measure strain in wood and paper. Wood Sci Technol 25:251–26210.1007/BF00225465 ↗
19. Murata K, Masuda M, Ichimaru M (1999) Analysis of radial compression behavior of wood using digital image correlation method (in Japanese). Mokuzai Gakkaishi 45(5):375–381
20. Nagai H, Murata K, Nakano T (2011) Strain analysis of lumber containing a knot during tensile failure. J Wood Sci 57:114–11810.1007/s10086-010-1154-x ↗
21. Keunecke D, Novosseletz K, Lanvermann C, Mannes D, Niemz P (2012) Combination of X-ray and digital image correlation for the analysis of moisture-induced strain in wood: opportunities and challenges. Eur J Wood Prod 70:407–41310.1007/s00107-011-0573-8 ↗
22. Hellström LM, Gradin PA, Carlberg T (2008) A method for experimental investigation of the wood chipping process. Nordic Pulp Paper Res J 23(3):339–34210.3183/NPPRJ-2008-23-03-p339-342 ↗
23. Matsuda Y, Fujiwara Y, Murata K, Fujii Y (2017) Residual strain analysis with digital image correlation method for subsurface damage evaluation of hinoki (Chamaecyparis obtusa) finished by slow-speed orthogonal cutting. J Wood Sci. https://doi.org/10.1007/s10086-017-1659-710.1007/s10086-017-1659-7 ↗
24. Franz NC (1955) Analysis of chip formation in wood machining. For Prod J 5(5):332–336
25. Franz NC (1958) An analysis of the wood-cutting process. Dissertation, University of Michigan, USA10.3998/mpub.9690780 ↗
26. McKenzie WM (1967) The basic wood cutting process. In: Proceedings of the second wood machining seminar, 10–11 Oct 1967, Richmond, pp 3–8
27. McKenzie WM, Hawkins BT (1966) Quality of near longitudinal wood surface formed by inclined cutting. For Prod J 16(7):35–38
28. Stewart HA (1971) Chip formation when orthogonally cutting wood against the grain. Wood Sci 3(4):193–203
29. Inoue H, Mori M (1979) Effects of cutting speed on chip formation and cutting resistance in cutting of wood parallel to the grain. Mokuzai Gakkaishi 25(1):22–29
30. Matsuda Y, Fujiwara Y, Fujii Y (2015) Observation of machined surface and subsurface structure of hinoki (Chamaecyparis obtusa) produced in slow-speed orthogonal cutting using X-ray computed tomography. J Wood Sci 61:128–13510.1007/s10086-014-1457-4 ↗
31. Schneider CA, Rasband WS, Eliceiri KW (2012) NIH Image to ImageJ: 25 years of image analysis. Nat Methods 9:671–67510.1038/nmeth.2089 ↗
32. MATLAB Release (2017) The MathWorks, Inc., Natick, Massachusetts, USA
33. Chen X, Kimura S, Ozaki S, Yokochi H, Yonenobu H (2001) Effect of fiber orientation on chip swelling under orthogonal cutting (in Japanese). Mokuzai Gakkaishi 47(4):295–303
34. Merhar M, Bučar B (2012) Cutting force variability as a consequence of exchangeable cleavage fracture and compressive breakdown of wood tissue. Wood Sci Technol 46:965–97710.1007/s00226-011-0457-4 ↗