Stress estimation of roof axial members based on the release strain measured at demolition of the Japanese wooden traditional old temple
Source abstract
Abstract
In Japan, there are many large-scale old wooden buildings which show good durability. These buildings are subjected to external forces of various strength, including several disasters throughout the years. This study aims to understand the structural features of such old buildings by examining the stress state of their structural members. Targeting the dismantled old roof frame of a temple, measurement of Young’s modulus on its members using the stress wave method was performed, as well as measurement of the strain of the members during the demolition, and these results were used to conduct structural analysis. Using the velocity of the strut and the girder, the average Young’s moduli of both members were estimated to be 12.3 and 11.1 kN/mm², respectively. From these values and the strain measurement values, when removing 83 % of the total load of the roof frame and roof, the average vertical stress of the strut was estimated to be 4.4 N/mm²; the bending stress of the girder was estimated to be 3.1–5.9 N/mm². These values were matching with the values of 2D-FEM analysis. Furthermore, it was suggested that the maximum bending stress of a girder could be 117 % of the allowable stress of Japanese red pine.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Mukai Y, Yonezawa M, Koshihara M, Saito Y, Suzuki Y (2012) Numerical modeling of traditional Japanese wooden structures based on full-scale shaking table test results. In: Proc world conference on timber engineering (WCTE), Auckland, pp 429–436
2. Miyamoto S, Miyazawa K, Irie Y, Goto O (2005) Case study of seismic diagnosis and retrofit for Japanese old temple (in Japanese). J Struct Construct Eng AIJ 593:87–9410.3130/aijs.70.87_3 ↗
3. Suda T, Suzuki Y, Shimizu H, Ogasawara M (2006) Dynamic tests of traditional wooden house in Kyoto using large-scale shaking table. In: Proc WCTE 2006, Portland, pp 1354–1359
4. Imanishi Y (2009) Documentation on the restoration work at Toshodai-ji temple Kondo a national treasure (in Japanese). GBRC (J Gene Build Res Corp Jpn) 34:6–20
5. Yamasaki M, Sasaki Y (2010) Determining Young’s modulus of timber on the basis of a strength database and stress wave propagation velocity I: an estimation method for Young’s modulus employing Monte Carlo simulation. J Wood Sci 56:269–27510.1007/s10086-010-1108-3 ↗
6. Yamasaki M, Sasaki Y, Iijima Y (2010) Determining Young’s modulus of timber on the basis of a strength database and stress wave propagation velocity II: effect of the reference distribution database on the determination. J Wood Sci 56:380–38610.1007/s10086-010-1114-5 ↗
7. Yokoyama M, Gril J, Matsuo M, Yano H, Sugiyama J, Clair B, Kubodera S, Mistutani T, Sakamoto M, Ozaki H, Imamura M, Kawai S (2009) Mechanical characteristics of aged Hinoki wood from Japanese historical buildings. CR Phys 10:601–61110.1016/j.crhy.2009.08.009 ↗
8. Yamashita S, Tanaka S (2004) Introduction of FEM analysis using EXCEL—analysis for the frame construction (in Japanese). INDEX Press, Tokyo
9. Forestry and Forest Products Research Institute (2005) Database of strength performance of commercial lumber (in Japanese). Database No. 7. The Institute, Ibaraki
10. Agency for Cultural Affairs (2012) Implementation guidelines for basic diagnosis of seismic performance of important cultural properties (Buildings) (in Japanese). Agency for Cultural Affairs, Ministry of Education, Culture, Sports, Science and Technology in Japan, Tokyo, p 9
11. Architectural Institute of Japan (2006) Standard and explanatory for the design of wooden construction—allowable stress design and allowable proof stress design method (in Japanese). Maruzen, Tokyo, pp 395–412