journal article·2024-10-29Open access

Experimental study on seismic performance of glulam structural columns with anchored connections

Xiaowei Li, Jihang Liu, Zhaoqiang Zhang, Dongwen Ma, Lidan Pang

Journal of Wood Science· Volume 70· Issue 1

Abstract

Abstract In current timber structures, the low initial stiffness, and weak bending resistance of the connections result in significant structural deformation and failures. To improve the mechanical capabilities of timber structural joints, a novel timber-component anchorage system with robust bending resistance was introduced. Thirteen scaled-down specimens of glulam columns with anchored connections were meticulously fabricated for testing, scaled at a ratio of 1/2. Cyclic loading tests were conducted, considering three types of the volume compression percentage of confined wood perpendicular to the grain; and five axial-load levels. Subsequently, various seismic performance aspects of glulam columns with anchored connections were examined, including the failure mode, hysteresis behavior, envelope curve, strength degradation, stiffness degradation, energy dissipation capacity, and critical points. During the analysis, the influence of the P–Δ effect on the results was discussed and a damage-based hysteretic model was presented. Finally, a comparison of the mechanical performance for various types of timber structural joints was conducted. The findings revealed that the failure mode of the anchored glulam columns occurred as cracking perpendicular to the grain, and the anchored columns exhibited superior bending resistance and overall seismic performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Wood Treatment and Properties · Structural Load-Bearing Analysis · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Zhang BZ, Xie QF, Li SY, Zhang LP, Wu YJ (2022) Effects of gaps on the rotational performance of traditional straight mortise-tenon joints. Eng Struct 260:114231. https://doi.org/10.1016/j.engstruct.2022.11423110.1016/j.engstruct.2022.114231 ↗
2. Wu YJ, Lin HS, Wang L, Xie QF, Zhang LP (2023) Lateral performance of mortise-tenon jointed frames in multi-story traditional heavy timber structures: mechanism and quantification. Eng Struct 288:116218. https://doi.org/10.1016/j.engstruct.2023.11621810.1016/j.engstruct.2023.116218 ↗
3. Yu P, Yang QS, Law SS (2022) Lateral performances of traditional wooden frame with loose penetrated mortise-tenon connection and column foot models. J Build Eng 47:103793. https://doi.org/10.1016/j.jobe.2021.10379310.1016/j.jobe.2021.103793 ↗
4. Xu BH, Yu KB, Jiao SY, Zhao YH, Zhang BS (2023) Pull-out performance of timber joints with glued-in densified wood dowels. J Mater Civ Eng 35:04023244. https://doi.org/10.1061/JMCEE7.MTENG-1561010.1061/JMCEE7.MTENG-15610 ↗
5. Huang H, Sun ZW, Guo T, Li P (2017) Experimental study on the seismic performance of traditional chuan-dou style wood frames in southern China. Struct Eng Int 27:246–254. https://doi.org/10.2749/101686617x1488193243581710.2749/101686617x14881932435817 ↗
6. Li XW, Zhao JH, Ma GW, Huang SH (2015) Experimental study on the traditional timber mortise-tenon Joints. Adv Struct Eng 18:2089–2102. https://doi.org/10.1260/1369-4332.18.12.208910.1260/1369-4332.18.12.2089 ↗
7. Li XW, Zhao JH, Ma GW, Chen W (2015) Experimental study on the seismic performance of a double-span traditional timber frame. Eng Struct 98:141–150. https://doi.org/10.1016/j.engstruct.2015.04.03110.1016/j.engstruct.2015.04.031 ↗
8. Ogawa K, Sasaki Y, Yamasaki M (2016) Theoretical estimation of the mechanical performance of traditional mortise–tenon joint involving a gap. J Wood Sci 62:242–250. https://doi.org/10.1007/s10086-016-1544-910.1007/s10086-016-1544-9 ↗
9. Sandberg LB, Bulleit WM, Reid EH (2000) Strength and stiffness of oak pegs in traditional timber-frame Joints. J Struct Eng 126:717–723. https://doi.org/10.1061/(asce)0733-9445(2000)126:6(717)10.1061/(asce)0733-9445(2000)126:6(717) ↗
10. Li Z, Chen F, He MJ, Long WG, Ou JJ, Li MH (2023) Experimental investigation on self-centering steel-timber hybrid beam-column connections. J Struct Eng 149:04022256. https://doi.org/10.1061/JSENDH.STENG-115710.1061/JSENDH.STENG-1157 ↗
11. Zhao Y, Yuan Y, Wang CL, Meng SP (2023) Experimental and finite element analysis of flexural performance of steel-timber composite beams connected by hybrid-anchored screws. Eng Struct 292:116503. https://doi.org/10.1016/j.engstruct.2023.11650310.1016/j.engstruct.2023.116503 ↗
12. Wang XD, Su PF, Liu JD, Chen ZH, Khan KS (2022) Seismic performance of light steel-natural timber composite beam-column joint in low-rise buildings. Eng Struct 256:113969. https://doi.org/10.1016/j.engstruct.2022.11396910.1016/j.engstruct.2022.113969 ↗
13. Gohlich R, Erochko J, Woods JE (2018) Experimental testing and numerical modelling of a heavy timber moment-resisting frame with ductile steel links. Earthq Eng Struct D 47:1460–1477. https://doi.org/10.1002/eqe.302510.1002/eqe.3025 ↗
14. Qf XIE, Zhang Y, Wu YJ, Zhang LP (2022) Experimental study on seismic behavior of glulam columns with column-shoes. J Struct Eng 43:223. https://doi.org/10.14006/j.jzjgxb.2021.041610.14006/j.jzjgxb.2021.0416 ↗
15. O’Ceallaigh C, Conway M, Mehra S, Harte AM (2021) Numerical investigation of reinforcement of timber elements in compression perpendicular to the grain using densified wood dowels. Constr Build Mater 288:122990. https://doi.org/10.1016/j.conbuildmat.2021.12299010.1016/j.conbuildmat.2021.122990 ↗
16. Wang Y, He M, Li Z (2024) Flexural behavior of glulam beams reinforced by bonded prestressing tendons. Eng Struct 315:118436. https://doi.org/10.1016/j.engstruct.2024.11843610.1016/j.engstruct.2024.118436 ↗
17. De Santis Y, Pasca DP, Aloisio A, Stenstan A, Mahnert KC (2023) Experimental, analytical and numerical investigation on the capacity of composite glulam beams with holes. Eng Struct 285:115995. https://doi.org/10.1016/j.engstruct.2023.11599510.1016/j.engstruct.2023.115995 ↗
18. GB/T 1927.2-2021 (2021) Test methods for physical and mechanical properties of small clear wood specimens-Part 2: sampling methods and general requirements. China Architecture & Building Press, Beijing
19. GB50708-2012 (2012) Technical code of glued laminated timber structures. China Architecture & Building Press, Beijing
20. ISO 16670: 2003 (2003) Timber structures-Joints made with mechanical fasteners-Quasi-static reversed-cyclic test method. Canada Technical Committee ISO/TC 165, Timber Structure, Ottawa.
21. GB/T 51226–2017 (2017) Technical standard for multi-story and high rise timber buildings. China Architecture & Building Press, Beijing
22. Guo ZH, Shi XD (2003) Reinforced concrete theory and analyses. Tsinghua University Press, Beijing
23. Dowell RK, Seible F, Wilson EL (1998) Pivot hysteresis model for reinforced concrete members. Aci Struct J 95:607–617. https://doi.org/10.1016/S0886-7798(98)00088-110.1016/S0886-7798(98)00088-1 ↗
24. Wang MQ, Song XB, Gu XL, Zhang YF, Luo L (2014) Study on rotational behavior of bolted glulam beam-to-column connections with slotted-in steel plates. J Build Struc 35:141–150. https://doi.org/10.14006/j.jzjgxb.2014.09.01810.14006/j.jzjgxb.2014.09.018 ↗
25. He MJ, Liu HF, Gao CY, Zhang JH (2015) Lateral resistance capacity of glulam beam-to-column bolted connections reinforced by plain round rod. J Tongji U 43:987–992. https://doi.org/10.11908/j.issn.0253-374x.2015.07.00410.11908/j.issn.0253-374x.2015.07.004 ↗