journal article·2026-07-30

An Electrostatic Method for 3D Extrusion of Micron‐Sized Conductive Structures for Sensing Applications

Farnaz Rezaei, Cacie McDorman, Rickard Shen, Stefan Johansson

Publisher page

Abstract

ABSTRACT Materials with high electrical conductivity and large specific surface area are essential for biosensing, as they enable efficient charge transfer and enhanced performance. We present near‐collector electroprinting, an electrostatic additive manufacturing technique for fabricating sub‐millimeter biosensor structures with high surface area, improved conductivity, and feature sizes reduced by orders of magnitude. PEDOT:PSS was used as the base ink material, and Ti 3 C 2 MXene was added to improve the electrical conductivity. The optimized ink achieved a conductivity of ∼117 S cm −1 . Using a nozzle with an inner diameter of 80 µm and optimized printing parameters enabled precise fabrication of well‐defined multilayer structures. Separate lines were printed at 40 µm pitch, with top‐layer fiber widths as small as 3 µm, demonstrating significant resolution enhancement relative to the nozzle size. The technique also enabled fabrication of solid structures at 30 µm pitch. Ink flow was evaluated over printing speeds of 0.5–4.5 mm s −1 to identify instabilities and back‐pressure effects. Functionality of the printed structures was assessed through protein attachment and release. Bovine serum albumin (BSA) release reached ∼198 ± 45 µg mL −1 , nearly a 107 ± 24% molar ratio relative to dextran sulfate. These results demonstrate strong potential for compact, high‐resolution biosensing applications with efficient biomolecule interaction.
Source: crossref · Quality: baseline

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering Uppsala University Uppsala Sweden

Alleima Palm Coast USA

Kanthal Hallstahammar Sweden

References (53)

Show source-provided references
1. 10.1021/nl504217p10.1021/nl504217p ↗
2. 10.1039/d4na00214h10.1039/d4na00214h ↗
3. 10.3389/fchem.2025.159130210.3389/fchem.2025.1591302 ↗
4. 10.1016/j.trac.2020.11593310.1016/j.trac.2020.115933 ↗
5. 10.1016/j.addma.2025.10479910.1016/j.addma.2025.104799 ↗
6. 10.1002/adfm.20190450710.1002/adfm.201904507 ↗
7. Graphene‐Based 3D‐Printed Nanocomposite Bioelectronics for Monitoring Breast Cancer Cell Adhesion10.1016/j.bios.2023.115113 ↗
8. 10.1002/advs.20210462310.1002/advs.202104623 ↗
9. 10.1016/j.snb.2019.12762110.1016/j.snb.2019.127621 ↗
10. 10.1016/j.addma.2021.10208810.1016/j.addma.2021.102088 ↗
11. 10.1016/j.mne.2025.10029910.1016/j.mne.2025.100299 ↗
12. 10.1016/j.carbon.2020.05.04510.1016/j.carbon.2020.05.045 ↗
13. 10.1002/adfm.20210986410.1002/adfm.202109864 ↗
14. 10.1016/j.carbon.2022.02.00310.1016/j.carbon.2022.02.003 ↗
15. 10.1038/s41467‐024‐50264‐610.1038/s41467‐024‐50264‐6 ↗
16. 10.1002/adma.20180613310.1002/adma.201806133 ↗
17. Enhancing the Conductivity of PEDOT:PSS Films by the Confinement of Ice Crystals10.1002/smtd.202300979 ↗
18. 10.1002/advs.20190081310.1002/advs.201900813 ↗
19. The Development and Characterisation of 3D‐Printed Multi‐Material Thermistor10.1016/j.addma.2024.104510 ↗
20. Highly Stretchable, Conductive, and Transparent PDMS Island‐Continuous PEDOT:PSS Matrix Composite Electrodes10.1002/admt.202300129 ↗
21. 10.1002/pol.2022060510.1002/pol.20220605 ↗
22. 10.1002/adma.20231097310.1002/adma.202310973 ↗
23. 10.1115/1.405585010.1115/1.4055850 ↗
24. Facile Material Extrusion of 3D Wearable Conductive‐Polymer Micro‐Super‐Capacitors10.1016/j.addma.2023.103714 ↗
25. Fully 3D Printed Piezoelectric Pressure Sensor for Dynamic Tactile Sensing10.1016/j.addma.2023.103601 ↗
26. 10.1016/j.jcis.2024.05.17110.1016/j.jcis.2024.05.171 ↗
27. 10.1038/s41428‐023‐00854‐w10.1038/s41428‐023‐00854‐w ↗
28. PEDOT:PSS‐Facilitated Directionally 3D Assembled MXene‐Based Aerogel for High‐Performance Chemoresistive Sensing & Breath Analysis10.1002/adma.202406349 ↗
29. 10.1016/j.matdes.2016.10.05310.1016/j.matdes.2016.10.053 ↗
30. 10.1088/1361‐648X/ab00a210.1088/1361‐648X/ab00a2 ↗
31. A Conductive Network Enhances Nerve Cell Response10.1016/j.addma.2022.102694 ↗
32. 10.1038/s41378‐025‐01102‐210.1038/s41378‐025‐01102‐2 ↗
33. 10.1002/admt.20230151710.1002/admt.202301517 ↗
34. 10.1002/adfm.20210137410.1002/adfm.202101374 ↗
35. 10.1016/j.mtadv.2024.10051210.1016/j.mtadv.2024.100512 ↗
36. 10.1002/admt.20250212010.1002/admt.202502120 ↗
37. 10.1016/j.bios.2018.02.02110.1016/j.bios.2018.02.021 ↗
38. 10.1021/ja508154e10.1021/ja508154e ↗
39. 10.1021/acs.chemmater.7b0284710.1021/acs.chemmater.7b02847 ↗
40. 10.1039/d3cs01024d10.1039/d3cs01024d ↗
41. 10.1002/smll.20250863310.1002/smll.202508633 ↗
42. Nanohybrids of a MXene and Transition Metal Dichalcogenide for Selective Detection of Volatile Organic Compounds10.1038/s41467-020-15092-4 ↗
43. 10.1038/s41378‐025‐01004‐310.1038/s41378‐025‐01004‐3 ↗
44. Additive‐Free MXene Inks and Direct Printing of Micro‐Supercapacitors10.1038/s41467-019-09398-1 ↗
45. 10.1016/j.matdes.2020.10944210.1016/j.matdes.2020.109442 ↗
46. 10.1002/aenm.20190183910.1002/aenm.201901839 ↗
47. 10.1021/acsami.2c0335010.1021/acsami.2c03350 ↗
48. 10.1002/smll.20250547110.1002/smll.202505471 ↗
49. 10.1021/acsapm.3c0014610.1021/acsapm.3c00146 ↗
50. Direct‐Ink‐Write 3D Printing of Programmable Micro‐Supercapacitors From MXene‐Regulating Conducting Polymer Inks10.1002/aenm.202203683 ↗
51. E. N.UdofiaandW.Zhou “Microextrusion Based 3D Printing‐A Review ” paper presented atSolid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference August 13–15 2018 Austin Texas USA.
52. 10.1016/j.jcis.2023.07.20610.1016/j.jcis.2023.07.206 ↗
53. 10.1039/D3MA00096F10.1039/D3MA00096F ↗