journal article·2026-08-01

3D‐Printed Dual‐Doped Ag 2 Se‐Based Thermoelectric Films With Enhanced Thermal Stability

Ahasun Habib Hridoy, Nishat Paul, Naimul Arefin, Axel Lopez, Peiran Wei, Brandon Dumars, Yan Chen, Mortaza Saeidi, Minxiang Zeng

Publisher page

Abstract

ABSTRACT While silver selenide (Ag 2 Se) is considered a promising n ‐type thermoelectric material, the low throughput of conventional solid‐state processing for selenide‐based systems highlights the need for scalable solution‐based alternatives. However, most solution‐processing approaches require thermal annealing to form high‐quality films, whereas Ag 2 Se exhibits limited thermal stability (<350°C), posing a nontrivial issue for processing. To address this, we systematically investigate the incorporation of a controlled dual dopant (Sb‐Se) into Ag 2 Se through a compositionally tuned nano‐ink. Flexible Sb x AgSe 0.5+y films were fabricated using the direct ink writing (DIW) approach, and the doped films demonstrated enhanced thermal stability. The effect of dopants on microstructure was further studied using neutron diffraction at the VULCAN instrument and elemental analysis using SEM‐EDS. Results demonstrated that elemental doping of Sb and Se leads to stable/enhanced Seebeck coefficients after thermal exposure, in contrast to undoped Ag 2 Se films with decreased Seebeck due to thermal degradation, where the thermal behavior and possible degradation pathways are evaluated at 200, 400, and 600°C. A wearable thermoelectric generator (TEG) demonstrated a peak power density of ∼60 µW cm −2 at 30°C temperature difference. Overall, this study suggests the possibility of printing‐based Ag 2 Se thermoelectric devices with high‐temperature processability for waste‐heat harvesting and harsh electronic applications.
Source: crossref · Quality: baseline

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering Texas Tech University Lubbock Texas USA

Department of Mechanical and Aerospace Engineering California State University Long Beach Long Beach California USA

Department of Materials Science and Engineering, Soft Matter Facility Texas A&M University College Station Texas USA

Neutron Scattering Division Oak Ridge National Laboratory Oak Ridge Tennessee USA

Funding

National Science Foundation

References (63)

Show source-provided references
1. 10.1038/nmat209010.1038/nmat2090 ↗
2. 10.1021/acsami.3c0982310.1021/acsami.3c09823 ↗
3. 10.1039/D2EE01844F10.1039/D2EE01844F ↗
4. 10.1039/D1TA05858D10.1039/D1TA05858D ↗
5. 10.1039/D1CS00490E10.1039/D1CS00490E ↗
6. 10.1039/D4EE00866A10.1039/D4EE00866A ↗
7. 10.1038/s41467‐019‐08835‐510.1038/s41467‐019‐08835‐5 ↗
8. 10.1021/acsaem.5c0183410.1021/acsaem.5c01834 ↗
9. 10.1038/s41467‐024‐50898‐610.1038/s41467‐024‐50898‐6 ↗
10. 10.1021/jacs.5c1143510.1021/jacs.5c11435 ↗
11. 10.1039/D4EE00866A10.1039/D4EE00866A ↗
12. 10.1002/adma.20221223010.1002/adma.202212230 ↗
13. 10.1038/s41586‐023‐05898‐910.1038/s41586‐023‐05898‐9 ↗
14. 10.1038/s41467‐025‐60284‐510.1038/s41467‐025‐60284‐5 ↗
15. 10.1038/s41467‐025‐63390‐610.1038/s41467‐025‐63390‐6 ↗
16. 10.1063/5.023586410.1063/5.0235864 ↗
17. Colloidal Nanosurfactants for 3D Conformal Printing of 2D van der Waals Materials10.1002/adma.202003081 ↗
18. Hybrid Printing of Wearable Piezoelectric Sensors10.1016/j.nanoen.2021.106522 ↗
19. 10.1021/acsaelm.1c0021810.1021/acsaelm.1c00218 ↗
20. 10.1021/acsami.1c1404910.1021/acsami.1c14049 ↗
21. 10.1016/j.apmt.2022.10140510.1016/j.apmt.2022.101405 ↗
22. 10.1002/admt.20250052610.1002/admt.202500526 ↗
23. 10.1038/s41467‐024‐46183‐110.1038/s41467‐024‐46183‐1 ↗
24. 10.1038/s41598‐017‐07654‐210.1038/s41598‐017‐07654‐2 ↗
25. 10.1039/D5EE01151E10.1039/D5EE01151E ↗
26. 10.1021/acsami.0c0167610.1021/acsami.0c01676 ↗
27. 10.1002/adfm.20240364610.1002/adfm.202403646 ↗
28. 10.1021/acsami.0c0167610.1021/acsami.0c01676 ↗
29. 10.1002/adem.20240228310.1002/adem.202402283 ↗
30. 10.1021/acsaelm.3c0184810.1021/acsaelm.3c01848 ↗
31. 10.1039/D3EE00378G10.1039/D3EE00378G ↗
32. 10.1088/1361‐6641/ab543610.1088/1361‐6641/ab5436 ↗
33. 10.3390/coatings1308130610.3390/coatings13081306 ↗
34. 10.1016/S0254‐0584(98)00203‐X10.1016/S0254‐0584(98)00203‐X ↗
35. 10.1364/AO.32.00009110.1364/AO.32.000091 ↗
36. 10.1021/acsami.1c0841010.1021/acsami.1c08410 ↗
37. 10.1063/5.018095010.1063/5.0180950 ↗
38. 10.1021/acsaem.9b0223110.1021/acsaem.9b02231 ↗
39. 10.1039/D1CS00347J10.1039/D1CS00347J ↗
40. 10.34133/energymatadv.010310.34133/energymatadv.0103 ↗
41. 10.1002/pssc.20098280110.1002/pssc.200982801 ↗
42. Enhanced Thermoelectric Properties in Ag‐rich AgSbSe210.1016/j.jssc.2020.121454 ↗
43. 10.1007/s13369‐022‐07488‐910.1007/s13369‐022‐07488‐9 ↗
44. 10.1016/j.matlet.2021.13107910.1016/j.matlet.2021.131079 ↗
45. Wagner C. · 2003 · 20899
46. Moudler J. F. · 1992 · 52
47. 10.1016/j.jpowsour.2014.09.03710.1016/j.jpowsour.2014.09.037 ↗
48. 10.1038/s41467‐024‐53967‐y10.1038/s41467‐024‐53967‐y ↗
49. 10.1007/s00339‐020‐03534‐110.1007/s00339‐020‐03534‐1 ↗
50. 10.1016/j.rinp.2023.10622210.1016/j.rinp.2023.106222 ↗
51. 10.1016/j.jallcom.2025.18307410.1016/j.jallcom.2025.183074 ↗
52. 10.1002/adsu.20250136210.1002/adsu.202501362 ↗
53. 10.1016/j.physb.2006.06.10310.1016/j.physb.2006.06.103 ↗
54. VULCAN: A “Hammer” for High‐temperature Materials Research | MRS Bulletin | Cambridge Core10.1557/mrs.2019.256 ↗
55. 10.1021/cm035274a10.1021/cm035274a ↗
56. 10.14102/j.cnki.0254‐5861.2011‐099710.14102/j.cnki.0254‐5861.2011‐0997 ↗
57. 10.1038/ncomms1216710.1038/ncomms12167 ↗
58. 10.1038/s41467‐025‐62336‐210.1038/s41467‐025‐62336‐2 ↗
59. Iron Chalcogenide Superconductors at High Magnetic Fields10.1088/1468-6996/13/5/054305 ↗
60. 10.1021/cm030001110.1021/cm0300011 ↗
61. 10.1126/science.aaa416610.1126/science.aaa4166 ↗
62. 10.1039/d5nr04828a10.1039/d5nr04828a ↗
63. 10.1007/s11661‐010‐0495‐910.1007/s11661‐010‐0495‐9 ↗