journal article·2026-07-01

Effect of tempering temperature on microstructure, mechanical properties, and corrosion resistance of high Cr ferritic–martensitic steel

Xiaoyu Huang, Heng Wang, Zhongqiang Ma, Lihua Dang, Xu Zhou, Jizhao Sun, Jianguo Chen

AIP Advances· Volume 16· Issue 7
Publisher page

Abstract

To investigate the comprehensive effects of tempering temperature on the microstructure, mechanical properties, and corrosion resistance of high Cr ferritic–martensitic steel, heat treatment tests were carried out on the normalized steel samples at three distinct tempering temperatures of 550, 650, and 750 °C. The microstructural features of the tempered steel were characterized using optical microscopy and transmission electron microscopy. The findings reveal that tempering temperature exerts a pivotal influence on the microstructure of steels. As the tempering temperature rises, the recovery degree of martensitic laths in the steel is enhanced, accompanied by an increase in both the size and quantity of carbides. The evolution of martensitic laths and carbides exerts a significant impact on the comprehensive properties of the steel. The recovery of martensitic laths contributes to a reduction in tensile strength while improving impact toughness, whereas the growth in the size and quantity of carbides leads to a deterioration in corrosion resistance. These research results offer a more comprehensive reference for the formulation of heat treatment processes for high Cr ferritic–martensitic steel in practical industrial production.
Source: crossref · Quality: baseline

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Tianjin Special Equipment Inspection Institute 1 , Tianjin 300192,

National Inspection and Detection Center for Special Equipment Welding Consumables Quality 2 , Tianjin 300350,

Key Laboratory of Digital Twin Generic Technology in Special Equipment for State Market Regulation 3 , Tianjin 300192,

School of Mechanical Engineering, Tianjin Sino-German University of Applied Sciences 4 , Tianjin 300350,

Funding

Science and Technology Development Fund of the Tianjin Education Commission for Higher Education · 2025 Special Project for the Construction of the Tianjin Center of the Jingjinji National Center of Technology Innovation

References (38)

Show source-provided references
1. Phase transformation behavior and microstructural control of high Cr martensitic/ferritic heat-resistant steels for power and nuclear plants: A review10.1016/j.jmst.2014.12.001 ↗
2. Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants10.1088/1468-6996/9/1/013002 ↗
3. Effects of tantalum on austenitic transformation kinetics of RAFM steel10.1016/s1006-706x(17)30106-1 ↗
4. Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors10.1179/174328005X41140 ↗
5. Effects of isothermal aging on microstructure and mechanical property of low-carbon RAFM steel10.1007/s40195-019-00883-6 ↗
6. Tailoring the tempered microstructure of a novel martensitic heat resistant steel G115 through prior cold deformation and its effect on mechanical properties10.1016/j.msea.2022.143015 ↗
7. Research progress of a novel martensitic heat-resistant steel G11510.11900/0412.1961.2021.00185 ↗
8. Improvement of high-temperature mechanical properties of low-carbon RAFM steel by MX precipitates10.1007/s40195-018-0703-y ↗
9. Evolution of creep damage in a modified ferritic heat resistant steel with excellent short-term creep performance and its oxide layer characteristic10.1016/j.msea.2014.04.075 ↗
10. The effect of deformation temperature in metastable austenite zone on microstructure evolution, mechanical and corrosion properties of high Cr ferritic-martensitic steel10.31577/km.2024.1.21 ↗
11. Influence of thermal ageing on tensile-plastic flow and work hardening parameters of Indian reduced activated ferritic martensitic steel10.2298/JMMB221114019S ↗
12. Microstructure control for high strength 9 Cr ferritic-martensitic steels10.1016/j.jnucmat.2011.12.011 ↗
13. Influence of tempering temperature upon precipitate phases in a 11% Cr ferritic/martensitic steel10.1016/j.jnucmat.2010.02.016 ↗
14. The effect of tempering temperature on the features of phase transformations in the ferritic-martensitic steel EK-18110.1016/j.jnucmat.2014.08.012 ↗
15. Effect of tempering and rolling on fatigue crack growth behavior of modified 9Cr-1Mo steel10.1007/s11665-018-3700-4 ↗
16. Sulfuration corrosion failure analysis of Inconel 600 alloy heater sleeve in high-temperature flue gas10.1016/j.engfailanal.2022.106111 ↗
17. High-temperature corrosion of an Fe-Ni-based alloy HR6W under various conditions at 750 oC and 810 oC: Effect of the temperature, water vapor, simulated ash and SO210.1016/j.matchemphys.2020.123670 ↗
18. Recent advances in understanding iron/steel corrosion: Mechanistic insights from molecular simulations10.1016/j.cossms.2025.101216 ↗
19. Effects of tantalum content on the microstructure and mechanical properties of low-carbon RAFM steel10.1016/j.jnucmat.2016.07.029 ↗
20. Study on microstructure and mechanical properties of direct diffusion bonded low-carbon RAFM steels10.1016/j.jmapro.2019.05.020 ↗
21. Control of precipitation behavior in reduced activation steels by intermediate heat treatment10.1016/j.msea.2011.05.084 ↗
22. Improve creep properties of reduced activation steels by controlling precipitation behaviors10.1016/j.msea.2012.03.004 ↗
23. Microstructure and its influence on mechanical properties of CLAM steel10.1016/j.fusengdes.2012.06.008 ↗
24. Creep behavior, microstructure evolution and fracture mechanism of a novel martensite heat resistance steel G115 affected by prior cold deformation10.1016/j.msea.2022.143564 ↗
25. Strengthening mechanisms of creep resistant tempered martensitic steel10.2355/isijinternational.41.641 ↗
26. Effect of tempering temperature on micro-structure and mechanical properties of high Ti microalloyed directly quenched high strength steel10.11900/0412.1961.2013.00760 ↗
27. Effect of tempering temperature on the toughness of 9Cr–3W–3Co martensitic heat resistant steel10.1016/j.matdes.2013.09.017 ↗
28. Effect of tempering temperature on low temperature impact toughness of a low carbon Mn-series bainitic steel10.3724/SP.J.1037.2010.00550 ↗
29. Tensile strength improvement of martensitic ODS steels with Zr and Hf additions10.1016/j.msea.2021.142071 ↗
30. Effect of martensite morphology on impact toughness of ultra-high strength 25CrMo48V steel seamless tube quenched at different temperatures10.1016/S1006-706X(13)60058-8 ↗
31. Improving resistance to crack and corrosion of laser-cladded TiC/Co-based composite coatings by doping minor CeO210.20964/2022.06.02 ↗
32. Corrosion behavior and mechanism of Cr-Mo alloyed steel: Role of ferrite/bainite duplex microstructure10.1016/j.jallcom.2019.151787 ↗
33. Effects of Ti on microstructure, mechanical properties and corrosion behavior of high-strength steel weld metals for offshore structures10.20964/2021.08.36 ↗
34. Effect of Cr/Mo carbides on corrosion behaviour of Fe_Mn_C twinning induced plasticity steel10.1016/j.corsci.2020.108518 ↗
35. Research on corrosion mechanism of microstructure on low alloy steel in humid atmosphere10.1016/j.mtcomm.2022.103715 ↗
36. Effects of secondary-phase formation on the electrochemical performance of a wire arc additive manufactured 420 martensitic stainless steel under different heat treatment conditions10.1007/s11665-021-05936-5 ↗
37. Effects of Cr and Mo on precipitation behavior and associated intergranular corrosion susceptibility of superaustenitic stainless steel S3265410.1016/j.matchar.2019.04.010 ↗
38. Intergranular corrosion behavior of low-chromium ferritic stainless steel without Cr-carbide precipitation after aging10.1016/j.corsci.2019.108420 ↗