journal article·2026-09

From porosity-controlled to phase-controlled mechanics: Sintering-driven microstructural and fracture evolution in commercial dental 3Y-TZP

Mohsen Sadeghpour Motlagh, Sara Banijamali, Bijan Eftekhari Yekta

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. History of dental biomaterials: biocompatibility, durability and still open challenges10.1186/s40494-023-01046-8 ↗
2. Advances and challenges in zirconia-based materials for dental applications10.1007/s43207-024-00416-7 ↗
3. Novel zirconia materials in dentistry10.1177/0022034517737483 ↗
4. State of the art of zirconia for dental applications10.1016/j.dental.2007.05.007 ↗
5. Machinability of a newly developed pre-sintered zirconia block for dental crown applications10.1016/j.matlet.2019.126996 ↗
6. Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency10.4047/jap.2013.5.2.161 ↗
7. The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio10.1007/s00784-012-0692-6 ↗
8. Impact of the sintering parameters on the grain size, crystal phases, translucency, biaxial flexural strength, and fracture load of zirconia materials10.1016/j.jmbbm.2024.106580 ↗
9. Microstructural characteristics of 3Y-TZP ceramics and their effects on the flexural strength10.3390/ceramics5040058 ↗
10. Transformation toughening in zirconia‐containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
11. Effect of grain size on mechanical properties of 3Y-TZP ceramics
12. Effect of heat treatment on grain size, phase assemblage, and mechanical properties of 3 mol% Y‐TZP10.1111/j.1151-2916.1996.tb08980.x ↗
13. TETRAGONAL ZrO2-Y2O3 PART II : the mechanical and electrical properties10.1051/jphyscol:19861119 ↗
14. The effect of yttria content on microstructure, strength, and fracture behavior of Yttria-Stabilized Zirconia10.3390/ma15155212 ↗
15. Mechanical properties-translucency-microstructure relationships in commercial monolayer and multilayer monolithic zirconia ceramics10.1016/j.dental.2022.04.011 ↗
16. Influence of sintering parameters on the microstructure and mechanical properties of nanosized 3Y-TZP ceramics10.1590/0366-69132021673812908 ↗
17. The grain size dependence of the mechanical properties in TZP ceramics
18. Transformation toughening10.1007/BF00809059 ↗
19. Effect the sintering temperature on the microstructure and flexural strength of ZrO(2) ceramics produced by NanoParticle jetting10.3390/ma18112605 ↗
20. Zhang · 2021
21. The effects of sintering temperature and duration on the flexural strength and grain size of zirconia10.3109/23337931.2015.1068126 ↗
22. The effect of sintering on zirconia manufactured via suspension-enclosing projection stereolithography for dental applications: an in vitro study10.3390/ma17010014 ↗
23. Ultrafast high-temperature sintering (UHS) vs. conventional sintering of 3YSZ: microstructure and properties10.1016/j.jeurceramsoc.2024.01.064 ↗
24. Effect of cooling rate on the microstructural and mechanical properties of speed-sintered monolithic zirconia
25. Dental zirconia microwave-sintering followed by rapid cooling protocol10.1016/j.jmbbm.2023.106351 ↗
26. Speed-sintering and the mechanical properties of 3–5 mol% Y2O3-stabilized zirconias10.1007/s10266-023-00796-y ↗
27. Research progress on the sintering techniques of Zirconia in prosthetic dentistry10.3390/ceramics8030118 ↗
28. Effect of high-speed sintering on the optical properties, microstructure, and phase distribution of multilayered zirconia stabilized with 5 mol% yttria10.3390/ma16165570 ↗
29. Densification and grain growth of nanocrystalline 3Y-TZP during two-step sintering10.1016/j.jeurceramsoc.2008.04.030 ↗
30. Comparative evaluation of traditional and speed sintering of dental ceramics based on zirconium dioxide10.17116/stomat2022101021106 ↗
31. Effect of sintering temperature on the microstructural characterization of conventional and translucent monolithic Zirconia, with and without hydrothermal degradation
32. Effect of phase transformations on the fracture toughness of t′ yttria stabilized zirconia10.1016/j.msea.2012.07.095 ↗
33. Ruiz · 1996 · 79
34. Effect of sintering temperature on microscopic and mechanical properties of 3Y-TZP dental ceramic
35. Critical effects of thermal processing conditions on grain size and microstructure of dental Y-TZP during layering and glazing
36. Chen · 2017
37. Temperature dependence of Young's modulus and damping of partially sintered and dense zirconia ceramics10.1016/j.jeurceramsoc.2019.12.064 ↗
38. Evaluation of the effect of high-speed sintering on the mechanical and crystallographic properties of dental Zirconia sintered bodies10.1016/j.jeurceramsoc.2022.10.044 ↗
39. Dental zirconia microwave-sintering followed by rapid cooling protocol10.1016/j.jmbbm.2023.106351 ↗
40. Hydrothermal degradation behavior of Y-TZP ceramics sintered by nonconventional microwave technology
41. Recovery of tetragonal phase from previously transformed Y-TZP10.1590/1980-5373-MR-2015-0426 ↗
42. Isothermal sintering effects on phase separation and grain growth in Yttria-Stabilized tetragonal zirconia polycrystal10.1111/j.1551-2916.2008.02861.x ↗
43. Cold sintering process for ZrO2‐based ceramics: significantly enhanced densification evolution in yttria‐doped ZrO210.1111/jace.14593 ↗
44. Grain-boundary structure and phase-transformation mechanism in yttria-stabilized tetragonal zirconia polycrystal10.4028/www.scientific.net/MSF.558-559.921 ↗
45. The influence of yttrium-segregation-dependent phase partitioning and residual stresses on the aging and fracture behaviour of 3Y-TZP ceramics10.1016/j.actbio.2017.08.014 ↗
46. Cubic‐formation and grain‐growth mechanisms in tetragonal zirconia polycrystal10.1111/j.1151-2916.2003.tb03483.x ↗
47. Critical effects of thermal processing conditions on grain size and microstructure of dental Y-TZP during layering and glazing10.1007/s10853-023-08227-7 ↗
48. The tetragonal‐monoclinic transformation in zirconia: lessons learned and future trends10.1111/j.1551-2916.2009.03278.x ↗
49. Review: microstructure-development mechanism during sintering in polycrystalline zirconia10.1080/09506608.2017.1402424 ↗
50. Sintering temperature accuracy and its effect on translucent yttria-stabilized zirconia: flexural strength, crystal structure, tetragonality and light transmission
51. Improving the low-temperature degradation (LTD) resistance of pure 3 mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) ceramics by defect engineering10.1016/j.ceramint.2025.07.089 ↗
52. Segregation in single‐crystal fully stabilized yttria‐zirconia10.1111/j.1151-2916.1995.tb08810.x ↗
53. High strength Y2O3-stabilized zirconia continuous fibers up to 1500°C: crystalline phase and microstructure evolution as well as grain growth kinetics10.1016/j.jallcom.2023.173165 ↗
54. Phase-transformation and grain-growth kinetics in Yttria-Stabilized tetragonal Zirconia Polycrystal doped with a small amount of alumia10.1016/j.jeurceramsoc.2010.01.007 ↗
55. Tetragonal phase stability maps of ceria-yttria co-doped zirconia: from powders to sintered ceramics
56. Critical effect of cubic phase on aging in 3mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis10.1016/j.biomaterials.2004.01.002 ↗
57. Abdelaal · 2016
58. Microstructural characteristics of 3Y-TZP ceramics and their effects on the flexural strength10.3390/ceramics5040058 ↗
59. Microstructure evolution and grain growth in the sintering of 3Y–TZP ceramics10.1023/A:1004481813393 ↗
60. Theunissen · 1993
61. Rapid grain growth in 3Y‐TZP nanoceramics by pressure‐assisted and pressure‐less SPS10.1111/jace.13837 ↗
62. Effect of hydrothermal aging on the phase stability, microstructure and mechanical properties of dental 3Y-TZP ceramics10.4028/www.scientific.net/AMM.529.251 ↗
63. Microstructural and crystallographic surface changes after grinding zirconia‐based dental ceramics
64. Structural studies of degradation process of zirconium dioxide tetragonal phase induced by grinding with dental bur10.1016/j.nimb.2017.07.024 ↗
65. Accelerated aging characteristics of three yttria-stabilized tetragonal zirconia polycrystalline dental materials10.1016/S0022-3913(12)60166-8 ↗
66. Free and constrained sintering of 3-MOL % yttria stabilised zirconia10.15446/dyna.v81n183.36918 ↗
67. German · 1996 · 568
68. Grain growth of silica‐added zirconia annealed in the cubic/tetragonal two‐phase region10.1111/j.1151-2916.1998.tb02591.x ↗
69. Lattice and grain‐boundary diffusion of Al in tetragonal yttria‐stabilized zirconia polycrystalline ceramics (3 Y‐TZP) analyzed using SIMS10.1111/jace.13126 ↗
70. Study of the densification and grain growth mechanisms occurring during spark plasma sintering of different submicronic yttria-stabilized zirconia powders10.1016/j.jeurceramsoc.2021.01.032 ↗
71. Sinter‐forging of nanocrystalline zirconia: II, simulation10.1111/j.1151-2916.1999.tb01799.x ↗
72. Grain boundary segregation-induced phase transformation and grain growth in Y2O3-stabilized ZrO2 polycrystals10.4028/www.scientific.net/KEM.616.8 ↗
73. Dependence of the sintering rate and related grain size of yttria-stabilized polycrystalline zirconia (3Y-TZP) on the strength of an applied DC electric field10.1016/j.msea.2011.08.022 ↗
74. Rapid sintering of nanocrystalline ZrO2(3Y) by spark plasma sintering10.1016/S0955-2219(00)00152-7 ↗
75. Yttria-ceria stabilized tetragonal zirconia polycrystals: sintering, grain growth and grain boundary segregation10.1016/0955-2219(94)90106-6 ↗
76. High fracture toughness of 3Y-TZP ceramic over a wide sintering range10.1016/j.matchemphys.2020.122693 ↗
77. Additive effect of micro-damage zones from nano-scale crack tip and nano-grains for fracture toughness measurements of 3Y-TZP zirconia ceramics10.1016/j.jeurceramsoc.2022.08.017 ↗
78. Effect of grain size on mechanical properties of submicrometer 3Y‐TZP: fracture strength and hydrothermal degradation10.1111/j.1551-2916.2007.01643.x ↗
79. Effect of grain size on mechanical properties and aging of yttria-stabilized tetragonal zirconia polycrystal fabricated by stereolithography-based additive manufacturing10.1016/j.ceramint.2024.11.136 ↗
80. Stability of nanocrystalline spark plasma sintered 3Y-TZP10.3390/ma3020800 ↗
81. Characterization of intergranular phases in tetragonal and cubic yttria-stabilized zirconia10.1017/S1431927600023047 ↗
82. On the isothermal martensitic transformation in 3Y‐TZP10.1111/j.1151-2916.1993.tb05330.x ↗
83. Mechanical properties and low-temperature aging of tetragonal zirconia polycrystals processed by hot isostatic pressing10.1557/JMR.2003.0337 ↗
84. Influence of porosity on mechanical properties of tetragonal stabilized zirconia10.1016/j.jeurceramsoc.2017.09.029 ↗
85. Preparation of transparent nanoceramics by suppressing pore coalescence10.1111/j.1551-2916.2011.04829.x ↗
86. Influence of porosity on R-Curve behaviour of tetragonal stabilized zirconia10.3390/ceramics5030040 ↗
87. Influence of sintering parameters on the microstructure and mechanical properties of nanosized 3Y-TZP ceramics10.1590/0366-69132021673812908 ↗
88. Porosity-dependence of elastic moduli and hardness of 3Y-TZP ceramics10.1016/S0272-8842(98)00037-6 ↗
89. Densification behavior of nano Y-TZP ceramics10.4028/www.scientific.net/AMM.372.165 ↗
90. Improved microstructure and hardness properties of low-temperature microwave-sintered Y2O3 stabilized ZrO2 ceramics with additions of nano TiO2 powders10.3390/ma13071546 ↗
91. Investigation of mechanical properties and low-temperature degradation of dental 3Y-TZP ceramics fabricated by stereolithography in combination with microwave sintering10.1016/j.jmbbm.2023.106211 ↗
92. Influence of processing on mechanical properties of 3Y-Tzp for dental applications
93. Effect of sintering temperature on the aging resistance and mechanical properties of monolithic zirconia10.1016/j.jmrt.2018.07.017 ↗
94. Ultrafast high-temperature sintering of 3D-Printed yttria-stabilized zirconia: microstructure and mechanical insights10.1016/j.ceramint.2025.07.054 ↗
95. The effect of sintering modes on the crystal lattice parameters and the morphology of the ZrO2–nY2O3 (n = 3–8 mol%) ceramic microstructure components10.5604/01.3001.0054.8015 ↗
96. Ting · 2016
97. Microstructural refinement in spark plasma sintering 3Y-TZP nanoceramics10.1016/j.jeurceramsoc.2016.03.019 ↗
98. Effects of sintering temperature and Yttria content on microstructure, phase balance, fracture surface morphology, and strength of Yttria-Stabilized Zirconia10.3390/app122211617 ↗
99. Wachtman · 2009
100. Constitutive modelling and weibull statistical analysis for the porosity - mechanical property correlations in 3% yittria-stabilized zirconia system10.1016/j.ijrmhm.2017.10.020 ↗