Review: current state of research on corrosion-resistant coatings for Mg–Li alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Tao X, Sun J, Huang Y et al (2025) Ultra-light Mg–Li alloy with high modulus prepared by cold metal transfer-based directed energy deposition. Addit Manuf 97:104617. https://doi.org/10.1016/j.addma.2024.10461710.1016/j.addma.2024.104617 ↗
2. Shen S, Jiang S, Zhan M (2022) Superplastic characteristics and forming of LZ91 Mg–Li alloy sheet. Adv Mech Eng 14:16878132221100644. https://doi.org/10.1177/1687813222110064410.1177/16878132221100644 ↗
3. Wang C, Wang S, Yin L et al (2025) Simultaneous improvement of strength and plasticity for LA103Z dual-phase Mg–Li alloy welded by friction stir welding. J Mater Res Technol 36:9572–9581. https://doi.org/10.1016/j.jmrt.2025.05.20210.1016/j.jmrt.2025.05.202 ↗
4. Wang J, Xu L, Wu R et al (2021) Simultaneous achievement of high electromagnetic shielding effectiveness (X-band) and strength in Mg–Li–Zn–Gd/MWCNTs composite. J Alloys Compd 882:160524. https://doi.org/10.1016/j.jallcom.2021.16052410.1016/j.jallcom.2021.160524 ↗
5. Wang D, Huang P, Wu R et al (2024) Synergistically improved strength and damping capacity of Mg–Li–Y–Er–Zn–Zr alloy by ultra-high pressure treatment. Mater Sci Eng A 915:147205. https://doi.org/10.1016/j.msea.2024.14720510.1016/j.msea.2024.147205 ↗
6. Wang J, Li Y, Wu R et al (2020) X-band shielding properties of Mg-9Li matrix composite containing Ni0.4Zn0.4Co0.2Fe2O4 fabricated by multi-layer composite rolling. J Alloys Compd 843:156053. https://doi.org/10.1016/j.jallcom.2020.15605310.1016/j.jallcom.2020.156053 ↗
7. Li H, Hou Z, Wang C et al (2025) A review of automated aircraft skin defects detection. Measurement 262:120019. https://doi.org/10.1016/j.measurement.2025.12001910.1016/j.measurement.2025.120019 ↗
8. Liu B, Yang J, Zhang X et al (2023) Development and application of magnesium alloy parts for automotive OEMs: a review. J Magnes Alloys 11:15–47. https://doi.org/10.1016/j.jma.2022.12.01510.1016/j.jma.2022.12.015 ↗
9. Makushko P, Ge J, Cañón Bermúdez GS et al (2025) Scalable magnetoreceptive e-skin for energy-efficient high-resolution interaction towards undisturbed extended reality. Nat Commun 16:1647. https://doi.org/10.1038/s41467-025-56805-x10.1038/s41467-025-56805-x ↗
10. Deng L, Babbitt CW, Williams ED (2011) Economic-balance hybrid LCA extended with uncertainty analysis: case study of a laptop computer. J Clean Prod 19:1198–1206. https://doi.org/10.1016/j.jclepro.2011.03.00410.1016/j.jclepro.2011.03.004 ↗
11. Li J, Zhou P, Wang L et al (2021) Investigation of Mg-xLi-Zn alloys for potential application of biodegradable bone implant materials. J Mater Sci Mater Med 32:43. https://doi.org/10.1007/s10856-021-06516-810.1007/s10856-021-06516-8 ↗
12. Song W, Wu Z, He S et al (2024) Effects of friction stir processing on the microstructure and mechanical properties of an ultralight Mg–Li alloy. Crystals 14:64. https://doi.org/10.3390/cryst1401006410.3390/cryst14010064 ↗
13. Zhou W, Zheng Y, Leeflang M et al (2013) Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg–Li–(Al)–(RE) alloys for future cardiovascular stent application. Acta Biomater 9:8488–8498. https://doi.org/10.1016/j.actbio.2013.01.03210.1016/j.actbio.2013.01.032 ↗
14. Bhat K, Schlotterose L, Hanke L et al (2024) Magnesium-lithium thin films for neurological applications-an in vitro investigation of glial cytocompatibility and neuroinflammatory response. Acta Biomater 178:307–319. https://doi.org/10.1016/j.actbio.2024.02.01810.1016/j.actbio.2024.02.018 ↗
15. Zhang H, Sun W, Liu D et al (2026) Synergistic enhancement of corrosion resistance in LZ91 MgLi alloys via ultrasonic surface rolling process and micro-arc oxidation. Surf Coat Tech 526:133363. https://doi.org/10.1016/j.surfcoat.2026.13336310.1016/j.surfcoat.2026.133363 ↗
16. Sun J, Wang X, Li Y et al (2026) Homogenization-induced improvements in mechanical and corrosion properties of Mg-12.31 Li-5.62 Al-0.14 Y alloy. Electrochim Acta 556:148410. https://doi.org/10.1016/j.electacta.2026.14841010.1016/j.electacta.2026.148410 ↗
17. Zhen Y, Lin C, Hu Y et al (2024) Electrically conductive and corrosion resistant coating on MgLi alloys, Part I: chemical conversion coating. Corros Commun 15:24–35. https://doi.org/10.1016/j.corcom.2023.08.00710.1016/j.corcom.2023.08.007 ↗
18. Guo Z, Ji Q, Wu R et al (2023) High-strength β-phase magnesium-lithium alloy prepared by multidirectional rolling. Materials (Basel) 16:3227. https://doi.org/10.3390/ma1608322710.3390/ma16083227 ↗
19. Pei S, Li S, Zhong L et al (2022) Analysis of the causes of differences between the upper and lower surfaces of electroless Ni-P coating on LZ91 magnesium-lithium alloy. Coatings 12:1157. https://doi.org/10.3390/coatings1208115710.3390/coatings12081157 ↗
20. Song Y, Shan D, Chen R et al (2009) Investigation of surface oxide film on magnesium lithium alloy. J Alloys Compd 484:585–590. https://doi.org/10.1016/j.jallcom.2009.04.13710.1016/j.jallcom.2009.04.137 ↗
21. Mou F, Wang Z, Zeng H et al (2023) Fabricating a corrosion-protective Li2CO3/Mg(OH)2 composite film on LA141 magnesium-lithium alloy by hydrothermal method. Surf Coat Technol 472:129939. https://doi.org/10.1016/j.surfcoat.2023.12993910.1016/j.surfcoat.2023.129939 ↗
22. Pang M, Zhong T, Jin S et al (2024) Tailoring the degradation rate of magnesium-lithium alloy with alloying elements of gadolinium and nickel. J Alloys Compd 976:173115. https://doi.org/10.1016/j.jallcom.2023.17311510.1016/j.jallcom.2023.173115 ↗
23. Yang Y, Chen X, Nie J et al (2021) Achieving ultra-strong magnesium-lithium alloys by low-strain rotary swaging. Mater Res Lett 9:255–262. https://doi.org/10.1080/21663831.2021.189115010.1080/21663831.2021.1891150 ↗
24. Boris K, Betsofen S (2021) Corrosion behavior of Mg–Li alloys: a review. Trans Nonferrous Met Soc China 31:3228–3254. https://doi.org/10.1016/S1003-6326(21)65728-X10.1016/S1003-6326(21)65728-X ↗
25. Morishige T, Obata Y, Goto T et al (2016) Effect of Al composition on the corrosion resistance of Mg-14 mass% Li system alloy. Mater Trans 57:1853–1856. https://doi.org/10.2320/matertrans.M201624710.2320/matertrans.M2016247 ↗
26. Dobkowska A, Adamczyk-Cieślak B, Koralnik M et al (2022) Corrosion behavior of fine-grained Mg-7.5 Li-3Al-1Zn fabricated by extrusion with a forward-backward rotating die (KoBo). J Magnes Alloys 10:811–820. https://doi.org/10.1016/j.jma.2021.08.02010.1016/j.jma.2021.08.020 ↗
27. Zhu Y, Zhou M, Geng Y et al (2024) Microstructural evolution and its influence on mechanical and corrosion behaviors in a high-Al/Zn containing duplex Mg–Li alloy after friction stir processing. J Mater Sci Technol 184:245–255. https://doi.org/10.1016/j.jmst.2023.10.01910.1016/j.jmst.2023.10.019 ↗
28. Ouyang Y, Zhou Z, Guo E et al (2024) Boosting corrosion resistance of Mg–Li alloy: implanting bioinspired superhydrophobic surfaces into MAO matrix for enhanced protection. Ceram Int 50:48425–48439. https://doi.org/10.1016/j.ceramint.2024.09.19210.1016/j.ceramint.2024.09.192 ↗
29. Yu F, Tian Z, Wu R et al (2025) Production and corrosion resistance mechanism of MgLiAlCe-LDHs@ GO-5NH3 composite coating. J Alloys Compd 1021:179443. https://doi.org/10.1016/j.jallcom.2025.17944310.1016/j.jallcom.2025.179443 ↗
30. Jin S, Ma X, Wu R et al (2022) Advances in micro-arc oxidation coatings on Mg–Li alloys. Appl Surf Sci Adv 8:100219. https://doi.org/10.1016/j.apsadv.2022.10021910.1016/j.apsadv.2022.100219 ↗
31. Li Z, Yuan Y, Jing X (2017) Composite coatings prepared by combined plasma electrolytic oxidation and chemical conversion routes on magnesium-lithium alloy. J Alloys Compd 706:419–429. https://doi.org/10.1016/j.jallcom.2017.02.24810.1016/j.jallcom.2017.02.248 ↗
32. Ouyang Y, Chen Z, Guo E et al (2022) Bioinspired superhydrophobic surface via one-step electrodeposition and its corrosion inhibition for Mg–Li alloy. Colloids Surf A Physicochem Eng Asp 648:129145. https://doi.org/10.1016/j.colsurfa.2022.12914510.1016/j.colsurfa.2022.129145 ↗
33. Li D, Cui X, Wen X et al (2023) Improved electrochemical behavior of Mg–Li alloys by superhydrophobic layered double hydroxides/Ni-based composite coatings. J Alloys Compd 947:169666. https://doi.org/10.1016/j.jallcom.2023.16966610.1016/j.jallcom.2023.169666 ↗
34. Sun Y, Yang R, Xie L et al (2021) Interfacial bonding mechanism and properties of HVOF-sprayed Fe-based amorphous coatings on LA141 magnesium alloy substrate. Surf Coat Technol 426:127801. https://doi.org/10.1016/j.surfcoat.2021.12780110.1016/j.surfcoat.2021.127801 ↗
35. Wan S, Cui X, Liu K et al (2023) Preparation of AlTiVNiCu/Cu-Al gradient functional coating via laser cladding for enhanced wear and corrosion resistance of Mg–Li alloy. Surf Coat Technol 475:130137. https://doi.org/10.1016/j.surfcoat.2023.13013710.1016/j.surfcoat.2023.130137 ↗
36. Zhang J, Luo N, Wu J et al (2026) Effect of ion-exchange temperature on the microstructure and corrosion resistance of aspartic acid-modified MgAlCa-layered double hydroxide coatings on LA103Z Mg–Li alloy. Adv Eng Mater 28:e202502258. https://doi.org/10.1002/adem.20250225810.1002/adem.202502258 ↗
37. Li Z, Kuang Q, Dong X et al (2019) Characteristics of high-performance anti-corrosion/anti-wear ceramic coatings on magnesium-lithium alloy by plasma electrolytic oxidation surface engineering. Surf Coat Technol 375:600–607. https://doi.org/10.1016/j.surfcoat.2019.07.06610.1016/j.surfcoat.2019.07.066 ↗
38. Lee S, Le HTD (2016) Effects of copper additive on micro-arc oxidation coating of LZ91 magnesium-lithium alloy. Surf Coat Technol 307:781–789. https://doi.org/10.1016/j.surfcoat.2016.10.00810.1016/j.surfcoat.2016.10.008 ↗
39. Lee S, Lee J, Chen C et al (2018) Effects of pulsed unipolar and bipolar current regimes on the characteristics of micro-arc oxidation coating on LZ91 magnesium-lithium alloy. Int J Electrochem Sci 13:2705–2717. https://doi.org/10.20964/2018.03.4210.20964/2018.03.42 ↗
40. Lee S, Lee J, Peng H (2017) Process design of micro-arc oxidation coatings based on magnesium lithium alloy and their characteristics. Int J Electrochem Sci 12:11256–11270. https://doi.org/10.20964/2017.12.6410.20964/2017.12.64 ↗
41. Ma X, Jin S, Wu R et al (2022) Influence alloying elements of Al and Y in MgLi alloy on the corrosion behavior and wear resistance of microarc oxidation coatings. Surf Coat Technol 432:128042. https://doi.org/10.1016/j.surfcoat.2021.12804210.1016/j.surfcoat.2021.128042 ↗
42. Wang Y, Liu C, Li H et al (2025) Influence of Zn2+ concentration on ceramic coatings for corrosion protection of magnesium-lithium alloys. Materials (Basel) 18:2072. https://doi.org/10.3390/ma1809207210.3390/ma18092072 ↗
43. Sukuroglu S, Totik Y, Sukuroglu EE et al (2024) Investigation of corrosion properties of LA91 alloy coated with MAO method. J Chin Soc Mech Eng 45:195–200
44. Zhang J, Li J, Hou A et al (2023) A comparative study and optimization of corrosion resistance of Mg-Al layered double hydroxides films at different hydrothermal temperatures on LA103Z Mg–Li alloy. Mater Corros 74:597–607. https://doi.org/10.1002/maco.20221354310.1002/maco.202213543 ↗
45. Zhang J, Hou A, Li J et al (2023) Enhanced corrosion resistance of layered double hydroxides/steam coating composite coating prepared by the hydrothermal method on LA43M magnesium-lithium alloy substrates. Int J Appl Ceram Technol 20:3714–3724. https://doi.org/10.1111/ijac.1446610.1111/ijac.14466 ↗
46. Zhang J, Duan X, Hou A et al (2022) In situ growth process and corrosion resistance of a layered double-hydroxide film on an LA103Z magnesium-lithium alloy. Mater Corros 73:1099–1109. https://doi.org/10.1002/maco.20211302210.1002/maco.202113022 ↗
47. Wang G, Song D, Qiao Y et al (2023) Developing super-hydrophobic and corrosion-resistant coating on magnesium-lithium alloy via one-step hydrothermal processing. J Magnes Alloys 11:1422–1439. https://doi.org/10.1016/j.jma.2021.08.00210.1016/j.jma.2021.08.002 ↗
48. Song D, Lian B, Fu Y et al (2021) Dual-layer corrosion-resistant conversion coatings on Mg-9Li alloy via hydrothermal synthesis in deionized water. Metals 11:1396. https://doi.org/10.3390/met1109139610.3390/met11091396 ↗
49. Wang G, Jiang J, Qiao Y et al (2022) Enhanced super-hydrophobicity and corrosion resistance of the one-step hydrothermal synthesized coating on the Mg-9Li alloy: role of the solid-solution treated substrate. J Alloys Compd 921:166044. https://doi.org/10.1016/j.jallcom.2022.16604410.1016/j.jallcom.2022.166044 ↗
50. Zhang J, Hou A, Li J et al (2023) Enhanced corrosion and wear resistance of LA43M magnesium-lithium alloy with magnesium-aluminum layered double hydroxide coating. J Mater Eng Perform 32:3550–3562. https://doi.org/10.1007/s11665-022-07361-810.1007/s11665-022-07361-8 ↗
51. Wu J, Wu L, Yao W et al (2023) Preparation and corrosion behavior of Mg (Li)-M layered double hydroxides films on the surface of magnesium-lithium alloy. Corros Sci 224:111511. https://doi.org/10.1016/j.corsci.2023.11151110.1016/j.corsci.2023.111511 ↗
52. Yang L, Li S, Peng H et al (2025) Preparation and corrosion resistance of hydrothermal coatings on LZ91 Mg–Li alloy. Coatings 15:1217. https://doi.org/10.3390/coatings1510121710.3390/coatings15101217 ↗
53. Xu C, Chen L, Yu L et al (2014) Effect of pickling processes on the microstructure and properties of electroless Ni-P coating on Mg-7.5 Li-2Zn-1Y alloy. Prog Nat Sci Mater Int 24:655–662. https://doi.org/10.1016/j.pnsc.2014.10.01410.1016/j.pnsc.2014.10.014 ↗
54. Zhang H, Wang S, Yao G et al (2009) Electroless Ni-P plating on Mg-10Li-1Zn alloy. J Alloys Compd 474:306–310. https://doi.org/10.1016/j.jallcom.2008.06.06710.1016/j.jallcom.2008.06.067 ↗
55. Yue A, Cao Y, Zhang Y et al (2023) Study of electroless-deposited Zn on the surface of Mg–Li alloy. Materials (Basel) 16:5511. https://doi.org/10.3390/ma1616551110.3390/ma16165511 ↗
56. Zou Y, Zhang Z, Liu S et al (2014) Ultrasonic-assisted electroless Ni-P plating on dual phase Mg–Li alloy. J Electrochem Soc 162:C64. https://doi.org/10.1149/2.0841501jes10.1149/2.0841501jes ↗
57. Wan S, Li S, Cui X et al (2025) Enhanced wear and corrosion properties of Mg–Li alloys achieved through TiVCuAl gradient high-entropy alloy coating by laser cladding. Surf Coat Technol 498:131824. https://doi.org/10.1016/j.surfcoat.2025.13182410.1016/j.surfcoat.2025.131824 ↗
58. Wan S, Cui X, Jin G et al (2023) Microstructure and properties characterization of laser-cladded Cu-Al alloy coatings on Mg–Li alloy. Surf Coat Technol 460:129430. https://doi.org/10.1016/j.surfcoat.2023.12943010.1016/j.surfcoat.2023.129430 ↗
59. Jiang L, Cui X, Jin G et al (2022) Synthesis and microstructure, properties characterization of Ni-Ti-Cu/Cu-Al functionally graded coating on Mg–Li alloy by laser cladding. Appl Surf Sci 575:151645. https://doi.org/10.1016/j.apsusc.2021.15164510.1016/j.apsusc.2021.151645 ↗
60. Ahmed U, Yi L, Fei LF et al (2021) Enhancement of corrosion resistance and tribological properties of LA43M Mg alloy by cold-sprayed aluminum coatings reinforced with alumina and carbon nanotubes. J Therm Spray Technol 30:668–679. https://doi.org/10.1007/s11666-020-01146-y10.1007/s11666-020-01146-y ↗
61. Wan S, Cui X, Jin Q et al (2022) Microstructure and properties of cold sprayed aluminum bronze coating on MBLS10A-200 magnesium-lithium alloy. Mater Chem Phys 281:125832. https://doi.org/10.1016/j.matchemphys.2022.12583210.1016/j.matchemphys.2022.125832 ↗
62. Bao Y, Fu B, Jiao Y et al (2023) Study of wear and corrosion resistance of cold sprayed TC4 coating on the surface of Mg–Li alloy. Coatings 13:988. https://doi.org/10.3390/coatings1306098810.3390/coatings13060988 ↗
63. Chi J, Zhang H, Song S et al (2025) The impact of pre-and post-treatment processes on corrosion resistance of micro-arc oxidation coatings on Mg alloys: a systematic review. Materials (Basel) 18:723. https://doi.org/10.3390/ma1803072310.3390/ma18030723 ↗
64. Jia B, Ren R, Zhang H et al (2025) Research advancements of wear-resistant coatings fabricated on aluminum and its alloys. Coatings 15:750. https://doi.org/10.3390/coatings1507075010.3390/coatings15070750 ↗
65. Wang Z, Chen Y, Xu B et al (2025) Research on the surface and interface construction behaviour and wear/corrosion damage mechanism of amorphous high-entropy films based on MAO ceramic phase underlayers. Tribol Int 211:110829. https://doi.org/10.1016/j.triboint.2025.11082910.1016/j.triboint.2025.110829 ↗
66. Wang X, Zhang H, Liu B et al (2025) Design, preparation, and tribological properties of novel wide temperature range self-lubricating coatings on TC4 alloy. Surf Coat Technol 517:132852. https://doi.org/10.1016/j.surfcoat.2025.13285210.1016/j.surfcoat.2025.132852 ↗
67. Li G, Ma F, Liu P et al (2023) Review of micro-arc oxidation of titanium alloys: mechanism, properties and applications. J Alloys Compd 948:169773. https://doi.org/10.1016/j.jallcom.2023.16977310.1016/j.jallcom.2023.169773 ↗
68. Li D, Lin H, Wang X et al (2024) Nucleation and growth process of a softened-spark layer during microarc oxidation on a selective laser melted Ti alloy. RSC Adv 14:25975–25985. https://doi.org/10.1039/d4ra04704d10.1039/d4ra04704d ↗
69. Ochiabuto K, Pitts H, Cao Y et al (2024) Quantitative modeling of oxide growth in plasma electrolytic oxidation of titanium. Mater Chem Phys 323:129633. https://doi.org/10.1016/j.matchemphys.2024.12963310.1016/j.matchemphys.2024.129633 ↗
70. Chen C, Zhang Y, Wang S et al (2024) Enhancing corrosion resistance in Mg–Li alloy through plasma electrolytic oxidation coatings—exploring the impact of ionic liquids (BmimBF4). Surf Coat Tech 477:130329. https://doi.org/10.1016/j.surfcoat.2023.13032910.1016/j.surfcoat.2023.130329 ↗
71. Zhou T, Zhang X, Wang R et al (2022) Enhanced corrosion resistance of porous microarc oxidation coating sealed with electroless nickel plating under pressure impregnation. Mater Lett 315:131944. https://doi.org/10.1016/j.matlet.2022.13194410.1016/j.matlet.2022.131944 ↗
72. Song D, Wan H (2023) Key factor for the corrosion resistance of MAO coating on Mg alloy. Mater Chem Phys 305:127963. https://doi.org/10.1016/j.matchemphys.2023.12796310.1016/j.matchemphys.2023.127963 ↗
73. Xia Q, Li X, Yao Z et al (2021) Investigations on the thermal control properties and corrosion resistance of MAO coatings prepared on Mg-5Y-7Gd-1Nd-0.5 Zr alloy. Surf Coat Technol 409:126874. https://doi.org/10.1016/j.surfcoat.2021.12687410.1016/j.surfcoat.2021.126874 ↗
74. Zhao J, Zhang X, Jiang X et al (2026) Enhancing corrosion and wear resistance of LZ91 alloy via TiC-reinforced micro-arc oxidation composite coatings. J Mater Sci 61:11759–11782. https://doi.org/10.1007/s10853-026-12539-910.1007/s10853-026-12539-9 ↗
75. Zuldesmi M, Waki A, Kuroda K et al (2015) Hydrothermal treatment of titanium alloys for the enhancement of osteoconductivity. Mater Sci Eng C Mater Biol Appl 49:430–435. https://doi.org/10.1016/j.msec.2015.01.03110.1016/j.msec.2015.01.031 ↗
76. Abd Aziz MH, Othman MHD, Tavares JR et al (2022) Self-cleaning and anti-fouling superhydrophobic hierarchical ceramic surface synthesized from hydrothermal and fluorination methods. Appl Surf Sci 598:153702. https://doi.org/10.1016/j.apsusc.2022.15370210.1016/j.apsusc.2022.153702 ↗
77. Hao X, Hu Y, Zhen Y et al (2025) Electrically conductive and corrosion resistant coating on Mg–Li alloy, part II: electroless nickel plating coating with a cut-off design for the galvanic corrosion. Corros Commun 20:177–189. https://doi.org/10.1016/j.corcom.2024.07.00610.1016/j.corcom.2024.07.006 ↗
78. Srinivasan K, John S (2009) Electroless nickel deposition from methane sulfonate bath. J Alloys Compd 486:447–450. https://doi.org/10.1016/j.jallcom.2009.06.17810.1016/j.jallcom.2009.06.178 ↗
79. Delaunois F, Petitjean J, Lienard P et al (2000) Autocatalytic electroless nickel-boron plating on light alloys. Surf Coat Technol 124:201–209. https://doi.org/10.1016/S0257-8972(99)00621-010.1016/S0257-8972(99)00621-0 ↗
80. Luo H, Song B, Liu Y et al (2011) Electroless Ni-P plating on Mg–Li alloy by two-step method. Trans Nonferrous Met Soc China 21:2225–2230. https://doi.org/10.1016/S1003-6326(11)60999-010.1016/S1003-6326(11)60999-0 ↗
81. Yang L, Li J, Zheng Y et al (2009) Electroless Ni-P plating with molybdate pretreatment on Mg-8Li alloy. J Alloys Compd 467:562–566. https://doi.org/10.1016/j.jallcom.2007.12.04110.1016/j.jallcom.2007.12.041 ↗
82. Dong L, Liu X, Liang J et al (2021) Corrosion behavior of a eutectic Mg-8Li alloy in NaCl solution. Electrochem Commun 129:107087. https://doi.org/10.1016/j.elecom.2021.10708710.1016/j.elecom.2021.107087 ↗
83. Makarov A, Soboleva N, Malygina IY et al (2019) Improving the properties of a rapidly crystallized NiCrBSi laser clad coating by high-temperature processing. J Cryst Growth 525:125200. https://doi.org/10.1016/j.jcrysgro.2019.12520010.1016/j.jcrysgro.2019.125200 ↗
84. Xiong X, Taheri M, Shaban M et al (2025) Enhanced wear resistance of CoCrFeNiMo0.3Ta0.2 high-entropy alloy coatings fabricated by high-speed laser cladding and low-speed laser cladding: the role of graphene and solidification kinetics. Surf Coat Technol 512:132353. https://doi.org/10.1016/j.surfcoat.2025.13235310.1016/j.surfcoat.2025.132353 ↗
85. Yin D, Wang M, Wang Y et al (2025) A multiscale study on substrate size effect and energy density regulation on dynamic response of dilution rate in laser cladding iron-based coatings. Coatings 15:694. https://doi.org/10.3390/coatings1506069410.3390/coatings15060694 ↗
86. Yadav N, Harsh K, Natu H et al (2024) Refurbishment of continuous caster rolls by laser cladded Fe-Cr-Ni-Mo-Co alloy. J Mater Eng Perform 33:6050–6064. https://doi.org/10.1007/s11665-023-08369-410.1007/s11665-023-08369-4 ↗
87. Beiranvandi D, Razavi RS, Mirak A et al (2024) Evaluation of the corrosion and oxidation resistance of NiCoCrAlY cladding on CMSX-4 by laser cladding. J Mater Res Technol 33:4875–4883. https://doi.org/10.1016/j.jmrt.2024.10.14510.1016/j.jmrt.2024.10.145 ↗
88. Wen X, Cui X, Jin G et al (2021) A novel Ni2MnCuSnAl0.1 multi-principal element alloy coating to enhance the wear resistance and corrosion resistance of Mg–Li alloy. Opt Laser Technol 142:107243. https://doi.org/10.1016/j.optlastec.2021.10724310.1016/j.optlastec.2021.107243 ↗
89. Lu F, Ma K, Li C et al (2020) Enhanced corrosion resistance of cold-sprayed and shot-peened aluminum coatings on LA43M magnesium alloy. Surf Coat Technol 394:125865. https://doi.org/10.1016/j.surfcoat.2020.12586510.1016/j.surfcoat.2020.125865 ↗
90. Yu W, Sun X, Wang Y et al (2026) Bio-based fluorine-free bilayer superhydrophobic coating for durable corrosion protection of AZ31B magnesium alloy. J Mater Sci 61:12781–12803. https://doi.org/10.1007/s10853-026-12575-510.1007/s10853-026-12575-5 ↗
91. Assadi H, Gärtner F, Stoltenhoff T et al (2003) Bonding mechanism in cold gas spraying. Acta Mater 51:4379–4394. https://doi.org/10.1016/S1359-6454(03)00274-X10.1016/S1359-6454(03)00274-X ↗
92. Dykhuizen R, Smith M, Gilmore D et al (1999) Impact of high velocity cold spray particles. J Therm Spray Technol 8:559–564. https://doi.org/10.1361/10599639977035025010.1361/105996399770350250 ↗
93. Dai Z, Xu F, Wang J et al (2023) Investigation of dynamic contact between cold spray particles and substrate based on 2D SPH method. Int J Solids Struct 284:112520. https://doi.org/10.1016/j.ijsolstr.2023.11252010.1016/j.ijsolstr.2023.112520 ↗
94. Feng K, Wang S, Zhang K et al (2024) Microstructure and properties of cold-sprayed Al-x% Al2O3 composite coatings on LA43M Mg–Li alloy. J Therm Spray Technol 33:308–320. https://doi.org/10.1007/s11666-023-01686-z10.1007/s11666-023-01686-z ↗
95. Khun NW, Tan AWY, Sun W et al (2017) Wear and corrosion resistance of thick Ti-6Al-4V coating deposited on Ti-6Al-4V substrate via high-pressure cold spray. J Therm Spray Technol 26:1393–1407. https://doi.org/10.1007/s11666-017-0588-810.1007/s11666-017-0588-8 ↗
96. Huang J, Dun Y, Wan Q et al (2022) Improved corrosion resistance of MAO coating on Mg–Li alloy by RGO modified silanization. J Alloys Compd 929:167283. https://doi.org/10.1016/j.jallcom.2022.16728310.1016/j.jallcom.2022.167283 ↗
97. Li B, Ouyang Y, Guo E et al (2024) MAO-based solid-like slippery composite coating with superior corrosion resistance and robust machinery performance upon magnesium-lithium alloy LA81. Chem Eng J 497:154801. https://doi.org/10.1016/j.cej.2024.15480110.1016/j.cej.2024.154801 ↗
98. Zhang Y, Chen C, Tian H et al (2024) An ionic liquid-assisted strategy for enhanced anticorrosion of low-energy PEO coatings on magnesium-lithium alloy. J Magnes Alloys 12:2380–2396. https://doi.org/10.1016/j.jma.2023.01.00410.1016/j.jma.2023.01.004 ↗
99. Zhang J, Duan X, Hou A et al (2021) In situ preparation of Mg-Al-Co layered double hydroxides on microarc oxidation ceramic coating of LA103Z magnesium-lithium alloy for enhanced corrosion resistance. J Mater Eng Perform 30:8490–8499. https://doi.org/10.1007/s11665-021-06058-810.1007/s11665-021-06058-8 ↗
100. Li Z, Wang X, Dong X et al (2020) Creating high-performance bi-functional composite coatings on magnesium-8lithium alloy through electrochemical surface engineering with highly enhanced corrosion and wear protection. J Alloys Compd 818:153341. https://doi.org/10.1016/j.jallcom.2019.15334110.1016/j.jallcom.2019.153341 ↗