Volatile-assisted room-temperature reactive casting of thick-section silicon nitride ceramics with improved debinding stability
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Vat photopolymerization of complex-shaped silicon nitride ceramics with high mechanical and thermal performance by optimization sintering aids and kinetics10.1016/j.jeurceramsoc.2024.117014 ↗
2. Dense, Strong, and Precise Silicon Nitride-Based Ceramic Parts by Lithography-Based Ceramic Manufacturing10.3390/app10030996 ↗
3. Silicon Nitride and Related Materials10.1111/j.1151-2916.2000.tb01182.x ↗
4. Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures10.1016/j.msea.2009.09.064 ↗
5. CerAMfacturing of silicon nitride by using lithography-based ceramic vat photopolymerization (CerAM VPP)10.1016/j.jeurceramsoc.2022.10.011 ↗
6. Mechanical and thermal properties of Si3N4 ceramics prepared by gelcasting using high-solid-loading slurries10.1016/j.ceramint.2023.10.084 ↗
7. Mechanical and Dielectric Properties of Porous Slip Cast Silicon Nitride: Yttrium Oxide-Aluminum Oxide Sintering Aids10.1111/ijac.70162 ↗
8. Uniform rate debinding for Si3N4 vat photopolymerization 3D printing green parts using a specific-stage stepwise heating process10.1016/j.addma.2024.104119 ↗
9. Debinding and sintering optimization of stereolithography based silicon nitride parts for attaining centimetric wall-thickness shapes10.1016/j.jeurceramsoc.2024.116911 ↗
10. Surface characteristics and aqueous dispersibility of commercial silicon nitride powders: Effects of acid leaching, surface hydrolysis, and thermal oxidation10.1016/j.ceramint.2007.06.011 ↗
11. Effects of ceramic powder coating treatment on the curing behavior, mechanical properties, and microstructure of 3D printed silicon nitride ceramics10.1016/j.jeurceramsoc.2024.116952 ↗
12. Additive manufacturing of high-performance aluminium nitride ceramics using high solid loading and low viscosity slurry10.1080/17452759.2024.2383306 ↗
13. Effect of Inorganic Salt Coating on Light Scattering and Photocuring Behavior of Si3N4 Suspensions for DLP Printing
14. Improving cure performance of Si3N4 suspension with a high refractive index resin for stereolithography-based additive manufacturing10.1016/j.ceramint.2022.01.124 ↗
15. Study on defect-free debinding green body of ceramic formed by DLP technology10.1016/j.ceramint.2019.09.237 ↗
16. Thermal debinding for stereolithography additive manufacturing of advanced ceramic parts: A comprehensive review10.1016/j.matdes.2024.112632 ↗
17. Laser debinding of parts produced through material extrusion additive manufacturing10.1016/j.jmapro.2023.01.036 ↗
18. Defect inhibition mechanism of 3D-printed ceramics via synergetic resin composition and debinding processing regulation10.1111/jace.20168 ↗
19. Effect of debinding temperature under an argon atmosphere on the microstructure and properties of 3D-printed alumina ceramics10.1016/j.matchar.2020.110548 ↗
20. Microwave-assisted debinding of Al2O3 parts printed by stereolithography10.1016/j.ceramint.2023.02.206 ↗
21. Research on new ceramic debinding technology with low energy consumption via dielectric barrier discharge10.1088/1402-4896/acc2f6 ↗
22. Study on Debinding and Sintering Processes for Ceramics Fabricated Using Digital Light Processing (DLP) 3D Printing10.3390/pr10112467 ↗
23. Effects of Solvent Debinding on the Microstructure and Properties of 3D-Printed Alumina Ceramics10.1021/acsomega.0c03944 ↗
24. Enabling fast debinding of ceramic vat photopolymerization prints with supercritical carbon dioxide as a solvent10.1016/j.addma.2024.104143 ↗
25. Pore channels optimization in digital light processing-printed ZrO2 green bodies for accelerated debinding and defect reduction through cleaning treatment10.1016/j.ceramint.2026.02.263 ↗
26. Development of thick-walled ceramic parts via vat photopolymerization using low-viscosity non-reactive diluent as an additive10.1016/j.addma.2024.104607 ↗
27. Partially water-soluble feedstock for ceramic vat photopolymerization enabling two-stage debinding10.1016/j.ceramint.2026.04.107 ↗
28. Evolution of debinding and sintering of a silica-based ceramic using vat photopolymerization additive manufacturing10.1016/j.addma.2025.104795 ↗
29. Research on the Morphology and Mechanical Property of Bonding Interfaces Fabricated by Multimaterial Digital Light Processing10.1016/j.amf.2025.200200 ↗
30. Photosensitive Si3N4 slurry with combined benefits of low viscosity and large cured depth for digital light processing 3D printing10.1016/j.jeurceramsoc.2022.10.056 ↗
31. Effect of Ultra-High Pressure Sintering and Spark Plasma Sintering and Subsequent Heat Treatment on the Properties of Si3N4 Ceramics10.3390/ma15207309 ↗
32. Indentation cracking in mono and polycrystalline cubic zirconia: Methodology of an apparent fracture toughness evaluation
33. Assessing the feasibility of camphor-assisted Vat Photopolymerization of alumina for ultra-rapid debinding and sintering10.1016/j.jeurceramsoc.2026.118427 ↗
34. A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization10.1016/j.ceramint.2021.01.031 ↗
35. A synergistic dispersion strategy for high volume fraction slurry and high performance silicon nitride sintered components in digital light processing (DLP)-based vat photopolymerization10.1016/j.addma.2024.104182 ↗
36. Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing10.1016/j.eml.2021.101403 ↗
37. Vat Photopolymerization-Based Additive Manufacturing of Si3N4 Ceramic Structures: Printing Optimization
38. The preparation and oxidation behavior of Ca-doped α-Sialon ceramic with elongated grains10.1016/j.jallcom.2017.06.163 ↗
39. A micromechanical basis for partitioning the evolution of grain bridging in brittle materials10.1016/j.jmps.2006.10.009 ↗
40. Effects of microstructures on the fracture properties of silicon nitride ceramics at elevated temperatures10.1111/ijac.14942 ↗
41. Defect-free DLP additive manufacturing of complex Ti64 components by non-reactive diluent assisted debinding10.1016/j.addma.2026.105121 ↗