Long‐Term Marine‐Induced Aging Mechanisms in FDM‐Printed PC, ABS and HIPS: Molecular and Microstructural Evolution
Source abstract
Abstract
ABSTRACT Additive manufacturing by fused deposition modelling (FDM) has expanded the use of engineering thermoplastics in environments where long‐term durability remains insufficiently characterized. In this work, the molecular and microstructural aging mechanisms of FDM‐printed polycarbonate (PC), acrylonitrile–butadiene–styrene (ABS) and high‐impact polystyrene (HIPS) were investigated after 12 months of natural estuarine exposure, covering one seasonal cycles. Despite negligible bulk mass loss (≤0.16%), pronounced molecular degradation occurred. Gel permeation chromatography revealed a clear susceptibility hierarchy (PC > ABS > HIPS), with PC exhibiting a 58% reduction in number‐average molecular weight and a substantial increase in dispersity, indicative of dominant chain scission. ATR–FTIR and SEM analyses suggested surface‐confined oxidative and hydrolytic modification accompanied by progressive attenuation of interlayer definition. Differential scanning calorimetry showed stable bulk thermal transitions, indicating that degradation remained spatially localized. Mechanical testing revealed increased stiffness and reduced deformation capacity, consistent with molecular‐weight‐driven embrittlement. The combined results seem to indicate a diffusion‐limited, surface‐controlled degradation regime in which architecture‐dependent transport phenomena inherent to FDM structures condition degradation kinetics. These findings are consistent with the fact that molecular restructuring precedes macroscopic erosion and governs the mechanical lifetime of additively manufactured thermoplastics in humid environments.
Source: crossref · Quality: baseline
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Departamento De Ingenieria Minera Metalurgica y Ciencia de Materiales Escuela De Ingenieria de Bilbao Euskal Herriko Unibertsitatea (EHU) Portugalete Spain
BCMaterials Basque Centre for Materials, Applications and Nanostructures Leioa Spain
Departamento De Organizacion de Empresas Escuela De Ingenieria de Bilbao Euskal Herriko Unibertsitatea (EHU) Portugalete Spain
Funding
Eusko Jaurlaritza
References (31)
Show source-provided references
1. 10.1016/j.marpolbul.2011.05.03010.1016/j.marpolbul.2011.05.030 ↗
2. 10.1021/acs.chemrev.7b0007410.1021/acs.chemrev.7b00074 ↗
3. Failure Analysis and Mechanical Characterization of 3D Printed ABS with Respect to Layer Thickness and Orientation
4. A. M.Baker J.Mccoy B. S.Majumdar et al. “Measurement and Modelling of Thermal and Mechanical Anisotropy of Parts Additively Manufactured Using Fused Deposition Modelling (FDM) ” In:Proc. SHM 2017 (2017):13917.10.12783/shm2017/13917 ↗
5. 10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
6. 10.1016/0010‐4361(83)90160‐X10.1016/0010‐4361(83)90160‐X ↗
7. 10.1016/j.polymdegradstab.2013.06.02410.1016/j.polymdegradstab.2013.06.024 ↗
8. 10.1016/0141-3910(96)00093-610.1016/0141-3910(96)00093-6 ↗
9. 10.1007/BF0044596910.1007/BF00445969 ↗
10. 10.1063/1.169971110.1063/1.1699711 ↗
11. 10.1021/cm040172l10.1021/cm040172l ↗
12. 10.3390/polym1207152910.3390/polym12071529 ↗
13. 10.1016/0141‐3910(95)00069‐X10.1016/0141‐3910(95)00069‐X ↗
14. Influence of Different Environmental Factors on the Aging of Corn Straw/Polycarbonate (PPC)/Polylactic Acid (PLA) Composite Materials
15. 10.1002/pola.1991.08029051010.1002/pola.1991.080290510 ↗
16. 10.1002/1097‐4628(20000923)77:13<3015::AID‐APP28>3.0.CO;2‐W10.1002/1097‐4628(20000923)77:13<3015::AID‐APP28>3.0.CO;2‐W ↗
17. Ward I. M. · 2013
18. 10.1002/advs.20200112110.1002/advs.202001121 ↗
19. Marine Plastic Debris: A New Surface for Microbial Colonization
20. 10.1016/0079‐6700(94)00001‐I10.1016/0079‐6700(94)00001‐I ↗
21. 10.1016/j.jhazmat.2021.12652610.1016/j.jhazmat.2021.126526 ↗
22. Wypych G. · 2025
23. 10.1007/s10532-025-10231-410.1007/s10532-025-10231-4 ↗
24. 10.1016/j.polymdegradstab.2025.11122210.1016/j.polymdegradstab.2025.111222 ↗
25. 10.1016/j.polymdegradstab.2008.03.02810.1016/j.polymdegradstab.2008.03.028 ↗
26. 10.3390/ma1419564510.3390/ma14195645 ↗
27. Wunderlich B. · 2005
28. 10.1002/047001114910.1002/0470011149 ↗
29. Kausch H. H. · 1987
30. 10.1007/978-3-642-80090-010.1007/978-3-642-80090-0 ↗
31. 10.1002/978047044287610.1002/9780470442876 ↗