journal article·2024-10

Effects of clay type and component fineness on the hydration and properties of limestone calcined clay cement

Muhammet Atasever, Sinan Turhan Erdoğan

Materials and Structures· Volume 57· Issue 8
Publisher page

Abstract

Limestone calcined clay cement (LC3) is emerging as an alternative to Portland cement, offering economic advantages, reduced CO2 emissions, and mechanical properties on par with Portland cement. Central to the effective utilization of LC3 is understanding how the fineness of its components affects its performance. The current study investigates limestone calcined clay cement mixtures composed of kaolinite, illite, and montmorillonite calcined clays and limestone at two levels of fineness. Strengths of mortar cubes were tested at 1, 3, 7, and 28 d and statistical analysis was performed with a 95% confidence level. Additionally, LC3 pastes were analyzed using x-ray diffraction, mercury intrusion porosimetry, scanning electron microscopy, and isothermal calorimetry. The fineness of the calcined clay along with the fineness of limestone is found to be statistically significant for 28-d strength in LC3 mortars made with kaolinitic and montmorillonite calcined clays. All hydrated blends had a hemicarboaluminate phase, whose intensity was related to the fineness of the calcined clay, and the monocarboaluminate phase formation was found to be dependent on both the fineness and type of calcined clay. Porosimetry revealed that LC3 pastes with illite clay have larger threshold pore diameters than those with kaolinite clay. LC3 pastes containing kaolinite have denser microstructures due to C–S–H and hemicarboaluminate formation. Pastes produced with coarse calcined clay and coarse limestone led to a broader, weaker heat development peak and lower normalized cumulative heat. LC3 with kaolinitic clay has the highest normalized cumulative heat, while that with montmorillonite calcined clay has the lowest. Graphical abstract: (Figure presented.)
Source: openaire · Quality: candidate unverified · Source record ↗

References (69)

Show source-provided references
1. Turner LK, Collins FG (2013) Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete. Constr Build Mater 43:125–130. https://doi.org/10.1016/j.conbuildmat.2013.01.02310.1016/j.conbuildmat.2013.01.023 ↗
2. Maddalena R, Roberts JJ, Hamilton A (2018) Can Portland cement be replaced by low-carbon alternative materials? A study on the thermal properties and carbon emissions of innovative cements. J Clean Prod 186:933–942. https://doi.org/10.1016/j.jclepro.2018.02.13810.1016/j.jclepro.2018.02.138 ↗
3. Huntzinger DN, Eatmon TD (2009) A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies. J Clean Prod 17(7):668–675. https://doi.org/10.1016/j.jclepro.2008.04.00710.1016/j.jclepro.2008.04.007 ↗
4. Gawah Q, Al-Osta MA, Maslehuddin M, Abdullah MA, Shameem M, Al-Dulaijan SU (2023) Development of sustainable self-compacting concrete utilising silico manganese fume. Eur J Environ Civ Eng 27(5):1897–1918. https://doi.org/10.1080/19648189.2022.210208310.1080/19648189.2022.2102083 ↗
5. Erdem TK, Meral Ç, Tokyay M, Erdoğan TY (2007) Use of perlite as a pozzolanic addition in producing blended cements. Cem Concr Compos 29(1):13–21. https://doi.org/10.1016/j.cemconcomp.2006.07.01810.1016/j.cemconcomp.2006.07.018 ↗
6. Knight KA, Cunningham PR, Miller SA (2023) Optimizing supplementary cementitious material replacement to minimize the environmental impacts of concrete. Cem Concr Compos 139:105049. https://doi.org/10.1016/j.cemconcomp.2023.10504910.1016/j.cemconcomp.2023.105049 ↗
7. Malhotra VM, Hammings RT (1995) Blended cements in North America-a review. Cem Concr Compos 17(1):23–35. https://doi.org/10.1016/0958-9465(95)95757-Q10.1016/0958-9465(95)95757-Q ↗
8. Hamdadou MN, Bignonnet F, Deboucha W, Ranaivomanana H, Leklou N, Arroudj K (2023) Hydration, mechanical and transfer properties of blended cement pastes and mortars prepared with recycled powder or limestone filler. J Build Eng 78:107541. https://doi.org/10.1016/j.jobe.2023.10754110.1016/j.jobe.2023.107541 ↗
9. Yong CL, Mo KH, Koting S, Ling TC (2024) Effect of various additives in activating early age properties of phosphorus furnace slag blended cement. J Build Eng 82:108136. https://doi.org/10.1016/j.jobe.2023.10813610.1016/j.jobe.2023.108136 ↗
10. Scrivener K, Martirena F, Bishnoi S, Maity S (2018) Calcined clay limestone cements (LC3). Cem Concr Res 114:49–56. https://doi.org/10.1016/j.cemconres.2017.08.01710.1016/j.cemconres.2017.08.017 ↗
11. Chaudhury R, Sharma U, Thapliyal PC, Singh LP (2023) Low-CO2 emission strategies to achieve net zero target in cement sector. J Clean Prod 417:137466. https://doi.org/10.1016/j.jclepro.2023.13746610.1016/j.jclepro.2023.137466 ↗
12. Schulze SE, Rickert J (2019) Suitability of natural calcined clays as supplementary cementitious material. Cem Concr Compos 95:92–97. https://doi.org/10.1016/j.cemconcomp.2018.07.00610.1016/j.cemconcomp.2018.07.006 ↗
13. Avet F, Li X, Scrivener K (2018) Determination of the amount of reacted metakaolin in calcined clay blends. Cem Concr Res 106:40–48. https://doi.org/10.1016/j.cemconres.2018.01.00910.1016/j.cemconres.2018.01.009 ↗
14. Sharma M, Bishnoi S, Martirena F, Scrivener K (2021) Limestone calcined clay cement and concrete: a state-of-the-art review. Cem Concr Res 149:106564. https://doi.org/10.1016/j.cemconres.2021.10656410.1016/j.cemconres.2021.106564 ↗
15. Fernández R, Martirena F, Scrivener K (2011) The origin of the pozzolanic activity of calcined clay minerals: a comparison between kaolinite, illite and montmorillonite. Cem Concr Res 41(1):113–122. https://doi.org/10.1016/j.cemconres.2010.09.01310.1016/j.cemconres.2010.09.013 ↗
16. Vizcaíno Andrés LM, Antoni MG, Alujas Diaz A, Martirena Hernández JF, Scrivener K (2015) Effect of fineness in clinker-calcined clays-limestone cements. Adv Cem Res 27(9):546–556. https://doi.org/10.1680/jadcr.14.0009510.1680/jadcr.14.00095 ↗
17. Borno IB, Ashraf W (2023) Effects of co-calcining kaolinite-rich clay blends with alkali and alkali earth metal hydroxides. Appl Clay Sci 231:106742. https://doi.org/10.1016/j.clay.2022.10674210.1016/j.clay.2022.106742 ↗
18. Zunino F, Scrivener K (2024) Reactivity of kaolinitic clays calcined in the 650 °C–1050 °C temperature range: towards a robust assessment of overcalcination. Cem Concr Res 146:105380. https://doi.org/10.1016/j.cemconcomp.2023.10538010.1016/j.cemconcomp.2023.105380 ↗
19. Alujas A, Fernández R, Quintana R, Scrivener K, Martirena F (2015) Pozzolanic reactivity of low grade kaolinitic clays: influence of calcination temperature and impact of calcination products on OPC hydration. Appl Clay Sci 108:94–101. https://doi.org/10.1016/j.clay.2015.01.02810.1016/j.clay.2015.01.028 ↗
20. Bonavetti VL, Castellano CC, Irassar EF (2022) Designing general use cement with calcined illite and limestone filler. Appl Clay Sci 230:106700. https://doi.org/10.1016/j.clay.2022.10670010.1016/j.clay.2022.106700 ↗
21. Zhou Y, Wang Z, Zhu Z, Chen Y, Wu K, Huang H, Anvarovna KG, Xu L (2022) Influence of metakaolin and calcined montmorillonite on the hydration of calcium sulphoaluminate cement. Case Stud Constr Mater 16:e01104. https://doi.org/10.1016/j.cscm.2022.e0110410.1016/j.cscm.2022.e01104 ↗
22. Mañosa J, Alvarez-Coscojuela A, Marco-Gibert J, Maldonado-Alameda A, Chimenos JM (2024) Enhancing reactivity in muscovitic clays: mechanical activation as a sustainable alternative to thermal activation for cement production. Appl Clay Sci 250:107266. https://doi.org/10.1016/j.clay.2024.10726610.1016/j.clay.2024.107266 ↗
23. Fitos M, Badogiannis EG, Tsivilis SG, Perraki M (2015) Pozzolanic activity of thermally and mechanically treated kaolins of hydrothermal origin. Appl Clay Sci 116–117:182–192. https://doi.org/10.1016/j.clay.2015.08.02810.1016/j.clay.2015.08.028 ↗
24. Tole I, Habermehl-Cwirzen K, Rajczakowska M, Cwirzen A (2018) Activation of a raw clay by mechanochemical process-effects of various parameters on the process efficiency and cementitious properties. Mater 11(10):1860. https://doi.org/10.3390/ma1110186010.3390/ma11101860 ↗
25. Avet F, Scrivener K (2018) Investigation of the calcined kaolinite content on the hydration of limestone calcined clay cement (LC3). Cem Concr Res 107:124–135. https://doi.org/10.1016/j.cemconres.2018.02.01610.1016/j.cemconres.2018.02.016 ↗
26. Chen Y, Zhang Y, Šavija B, Çopuroğlu O (2023) Fresh properties of limestone-calcined clay-slag cement pastes. Cem Concr Compos 138:104962. https://doi.org/10.1016/j.cemconcomp.2023.10496210.1016/j.cemconcomp.2023.104962 ↗
27. Maraghechi H, Avet F, Wong H, Kamyab H, Scrivener K (2018) Performance of limestone calcined clay cement (LC3) with various kaolinite contents with respect to chloride transport. Mater Struct 51(5):125. https://doi.org/10.1617/s11527-018-1255-310.1617/s11527-018-1255-3 ↗
28. Zunino F, Scrivener K (2021) The reaction between metakaolin and limestone and its effect in porosity refinement and mechanical properties. Cem Concr Res 140:106307. https://doi.org/10.1016/j.cemconres.2020.10630710.1016/j.cemconres.2020.106307 ↗
29. Dai J, Wang Q, Xie C, Xue Y, Duan Y, Cui X (2019) The effect of fineness on the hydration activity index of ground granulated blast furnace slag. Mater 12(18):2984. https://doi.org/10.3390/ma1218298410.3390/ma12182984 ↗
30. Lawrence P, Cyr M, Ringot E (2005) Mineral admixtures in mortars effect of type, amount and fineness of fine constituents on compressive strength. Cem Concr Res 35(6):1092–1105. https://doi.org/10.1016/j.cemconres.2004.07.00410.1016/j.cemconres.2004.07.004 ↗
31. Lutterotti L (2000) MAUD: a Rietveld analysis program designed for the internet and experiment integration. Acta Crystallogr Sect A Found Crystallogr 56:S5410.1107/S0108767300021954 ↗
32. Mañosa J, la Rosa JC, Silvello A, Maldonado-Alameda A, Chimenos JM (2023) Kaolinite structural modifications induced by mechanical activation. Appl Clay Sci 238:106918. https://doi.org/10.1016/j.clay.2023.10691810.1016/j.clay.2023.106918 ↗
33. Ardoğa MK (2014) Effect of particle size on heat of hydration of pozzolan incorporated cements, MSc Thesis, Middle East Technical University, Türkiye
34. ASTM C311/C311M-22 (2022) Standard test methods for sampling and testing fly ash or natural Pozzolans for use in Portland-cement concrete, annual book of ASTM standards, ASTM International, West Conshohocken
35. Kassa AE, Shibeshi NT, Tizazu BZ (2022) Characterization and optimization of calcination process parameters for extraction of aluminum from Ethiopian kaolinite. Int J Chem Eng 2022:1–18. https://doi.org/10.1155/2022/507263510.1155/2022/5072635 ↗
36. Elimbi A, Tchakoute HK, Njopwouo D (2011) Effects of calcination temperature of kaolinite clays on the properties of geopolymer cements. Constr Build Mater 25(6):2805–2812. https://doi.org/10.1016/j.conbuildmat.2010.12.05510.1016/j.conbuildmat.2010.12.055 ↗
37. Garg N, Skibsted J (2016) Pozzolanic reactivity of a calcined interstratified illite/smectite (70/30) clay. Cem Concr Res 79:101–111. https://doi.org/10.1016/j.cemconres.2015.08.00610.1016/j.cemconres.2015.08.006 ↗
38. He C, Makovicky E, Øsbæck B (1995) Thermal stability and pozzolanic activity of calcined illite. Appl Clay Sci 9(5):337–354. https://doi.org/10.1016/0169-1317(94)00033-M10.1016/0169-1317(94)00033-M ↗
39. Seiffarth T, Hohmann M, Posern K, Kaps C (2013) Effect of thermal pre-treatment conditions of common clays on the performance of clay-based geopolymeric binders. Appl Clay Sci 73:35–41. https://doi.org/10.1016/j.clay.2012.09.01010.1016/j.clay.2012.09.010 ↗
40. Garg N, Skibsted J (2019) Dissolution kinetics of calcined kaolinite and montmorillonite in alkaline conditions: evidence for reactive Al(V) sites. J Am Ceram Soc 102(12):7720–7734. https://doi.org/10.1111/jace.1666310.1111/jace.16663 ↗
41. Ferreiro S, Canut MMC, Lund J, Herfort D (2019) Influence of fineness of raw clay and calcination temperature on the performance of calcined clay-limestone blended cements. Appl Clay Sci 169:81–90. https://doi.org/10.1016/j.clay.2018.12.02110.1016/j.clay.2018.12.021 ↗
42. Zunino F, Boehm-Courjault E, Scrivener K (2020) The impact of calcite impurities in clays containing kaolinite on their reactivity in cement after calcination. Mater Struct 53(2):44. https://doi.org/10.1617/s11527-021-01654-510.1617/s11527-021-01654-5 ↗
43. ASTM C563-20 (2020) Standard guide for approximation of optimum SO3 in hydraulic cement, annual book of ASTM standards, ASTM International, West Conshohocken
44. Zunino F, Scrivener K (2019) The influence of the filler effect on the sulfate requirement of blended cements. Cem Concr Res 126:105918. https://doi.org/10.1016/j.cemconres.2019.10591810.1016/j.cemconres.2019.105918 ↗
45. Canbek O, Szeto C, Washburn NR, Kurtis KE (2023) A quantitative approach to determining sulfate balance for LC3. Cem 12:100063. https://doi.org/10.1016/j.cement.2023.10006310.1016/j.cement.2023.100063 ↗
46. ASTM C305-20 (2020) Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency, annual book of ASTM standards, ASTM International, West Conshohocken
47. ASTM C1437-20 (2020) Standard test method for flow of hydraulic cement mortar, annual book of ASTM standards, ASTM International, West Conshohocken
48. ASTM C109/109M (2020) Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or cube specimens), Annual Book of ASTM standards, ASTM International, West Conshohocken, PA
49. Batool F, Prasad NGN, Bindiganavile V (2018) Statistical modeling of thermal conductivity for cement-based foam. J Build Eng 19:449–458. https://doi.org/10.1016/j.jobe.2018.05.02210.1016/j.jobe.2018.05.022 ↗
50. Miranda-Trevino JC, Coles CA (2003) Kaolinite properties, structure and influence of metal retention on pH. Appl Clay Sci 23(1–4):133–139. https://doi.org/10.1016/S0169-1317(03)00095-410.1016/S0169-1317(03)00095-4 ↗
51. Chen Y, Zhang Y, He S, Liang X, Schlangen E, Çopuroğlu O (2023) Improving structural build-up of limestone-calcined clay-cement pastes by using inorganic additives. Construct Build Mater 392:131959. https://doi.org/10.1016/j.conbuildmat.2023.13195910.1016/j.conbuildmat.2023.131959 ↗
52. Bhavani S, Prasad MLV (2023) Strength and durability properties of SCC developed using limestone calcined clay cement (LC3). Mater Today Proc. https://doi.org/10.1016/j.matpr.2023.04.49710.1016/j.matpr.2023.04.497 ↗
53. Briki Y, Zajac M, Ben Haha M, Scrivener K (2021) Impact of limestone fineness on cement hydration at early age. Cem Concr Res 147:106515. https://doi.org/10.1016/j.cemconres.2021.10651510.1016/j.cemconres.2021.106515 ↗
54. Bahhou A, Taha Y, Hakkou R, Benzaazoua M, Tagnit-Hamou A (2024) Assessment of hydration, strength, and microstructure of three different grades of calcined marls derived from phosphate by-products. J Build Eng 84:108640. https://doi.org/10.1016/j.jobe.2024.10864010.1016/j.jobe.2024.108640 ↗
55. Liu Y, Alessi DS, Flynn SL, Alam MS, Hao W, Gingras M, Zhao H, Konhauser KO (2018) Acid-base properties of kaolinite, montmorillonite and illite at marine ionic strength. Chem Geol 483:191–200. https://doi.org/10.1016/j.chemgeo.2018.01.01810.1016/j.chemgeo.2018.01.018 ↗
56. Ma H (2014) Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application. J Porous Mater 21(2):207–215. https://doi.org/10.1007/s10934-013-9765-410.1007/s10934-013-9765-4 ↗
57. Zhao B, Liu L, Cheng H (2021) Rational design of kaolinite-based photocatalytic materials for environment decontamination. Appl Clay Sci 208:106098. https://doi.org/10.1016/j.clay.2021.10609810.1016/j.clay.2021.106098 ↗
58. Wilson MJ, Wilson L, Patey I (2014) The influence of individual clay minerals on formation damage of reservoir sandstones: a critical review with some new insights. Clay Miner 49(2):147–164. https://doi.org/10.1180/claymin.2014.049.2.0210.1180/claymin.2014.049.2.02 ↗
59. Koenig A (2020) Analysis of air voids in cementitious materials using micro X-ray computed tomography (µXCT). Constr Build Mater 244:118313. https://doi.org/10.1016/j.conbuildmat.2020.11831310.1016/j.conbuildmat.2020.118313 ↗
60. Li N, Yu S, Fang J, Yu Y, Jiang P, Pu S, Wang W (2022) Performance and mechanism of illite in removing graphene oxide from aqueous solution. Appl Clay Sci 230:106711. https://doi.org/10.1016/j.clay.2022.10671110.1016/j.clay.2022.106711 ↗
61. Zhou H (2016) Mixture of palygorskite and montmorillonite (Paly-Mont) and its adsorptive application for mycotoxins. Appl Clay Sci 131:140–143. https://doi.org/10.1016/j.clay.2016.03.01210.1016/j.clay.2016.03.012 ↗
62. Wang R, Peng Y, Zhou M, Shou D (2016) Smart montmorillonite-polypyrrole scaffolds for electro-responsive drug release. Appl Clay Sci 134:50–54. https://doi.org/10.1016/j.clay.2016.05.00410.1016/j.clay.2016.05.004 ↗
63. Florea MVA, Brouwers HJH (2012) Chloride binding related to hydration products. Cem Concr Res 42(2):282–290. https://doi.org/10.1016/j.cemconres.2011.09.01610.1016/j.cemconres.2011.09.016 ↗
64. Pantić V, Šupić S, Vučinić-Vasić M, Nemeš T, Malešev M, Lukić I, Radonjanin V (2023) Effects of grinding methods and water-to-binder ratio on the properties of cement mortars blended with biomass ash and ceramic powder. Mater 16(6):2443. https://doi.org/10.3390/ma1606244310.3390/ma16062443 ↗
65. Mboya HA, King’ondu CK, Njau KN, Mrema AL (2017) Measurement of pozzolanic activity index of scoria, pumice, and rice husk ash as potential supplementary cementitious materials for Portland cement. Adv Civ Eng 2017:1–13. https://doi.org/10.1155/2017/695264510.1155/2017/6952645 ↗
66. Maier M, Sposito R, Beuntner N, Thienel KC (2022) Particle characteristics of calcined clays and limestone and their impact on early hydration and sulfate demand of blended cement. Cem Concr Res 154:106736. https://doi.org/10.1016/j.cemconres.2022.10673610.1016/j.cemconres.2022.106736 ↗
67. Berodier E, Scrivener K (2014) Understanding the filler effect on the nucleation and growth of C-S-H. J Am Ceram Soc 97(12):3764–3773. https://doi.org/10.1111/jace.1317710.1111/jace.13177 ↗
68. Antoni M, Rossen J, Martirena F, Scrivener K (2012) Cement substitution by a combination of metakaolin and limestone. Cem Concr Res 42(12):1579–1589. https://doi.org/10.1016/J.CEMCONRES.2012.09.00610.1016/J.CEMCONRES.2012.09.006 ↗
69. Rodriguez C, Tobon JI (2020) Influence of calcined clay/limestone, sulfate and clinker proportions on cement performance. Constr Build Mater 251:119050. https://doi.org/10.1016/j.conbuildmat.2020.11905010.1016/j.conbuildmat.2020.119050 ↗