journal article·2026-09

Performance of mechanochemically activated supplementary cementitious materials in cement pastes and mortars

Sofiane Amroun, Anagha Iyer, Prannoy Suraneni

Materials and Structures· Volume 59· Issue 7
Publisher page

Abstract

Abstract Mechanochemical activation (MCA) is a rapidly emerging technology for producing supplementary cementitious materials (SCMs). However, performance data on MCA SCMs is lacking. Here, we investigated the potential use of four low-grade materials as sources of alternative SCMs following MCA treatment. The studied materials were municipal solid waste incineration bottom ash (BA), basaltic fines (BF), low-grade clay (CL), and dredged sediments (DS). MCA increased the amorphous content (44% on average) and reactivity (830% average) of all materials, as indicated by quantitative X-ray diffraction and modified R 3 test results. All materials, except for DS, were transformed into reactive SCMs after MCA. The BET specific surface area increased significantly for BA, BF, and DS, but decreased by 64% for CL. Generally, MCA increased the 168-h heat release of the blended cement pastes (15% on average), while no systematic effect on the heat flow was detected. The increase in SCM reactivity was also evidenced by reductions in calcium hydroxide content of cement pastes incorporating MCA materials compared to untreated materials (40% average at 28 days). Slump flow values increased for all materials, except for BF, for which a minor decrease was detected. The compressive strength and bulk resistivity of mortar samples showed that MCA had beneficial effects, especially at later ages (~ 42–45% average increases at all ages). These results suggest that compressive strength, bulk resistivity, and slump flow in mortars can be simultaneously enhanced through MCA. This is especially valuable considering that the materials studied are all considered low-grade or landfillable by-products.
Source: crossref · Quality: baseline

References (57)

Show source-provided references
1. Watari T, Cao Z, Serrenho AC, Cullen J (2023) Growing role of concrete in sand and climate crises. iScience 26:106782. https://doi.org/10.1016/j.isci.2023.10678210.1016/j.isci.2023.106782 ↗
2. Scrivener KL, John VM, Gartner EM (2018) Eco-efficient cements: potential economically viable solutions for a low-CO2 cement-based materials industry. Cem Concr Res 114:2–26. https://doi.org/10.1016/j.cemconres.2018.03.01510.1016/j.cemconres.2018.03.015 ↗
3. Sutter L (2024) Integrating alternative supplementary cementitious materilas into next generation paving. Tech Brief
4. Snellings R, Suraneni P, Skibsted J (2023) Future and emerging supplementary cementitious materials. Cem Concr Res 171:107199. https://doi.org/10.1016/j.cemconres.2023.10719910.1016/j.cemconres.2023.107199 ↗
5. Adams TH (2024) Coal ash recycling rate increased in 2024 as ash harvesting continued rapid growth. Am Coal Ash Assoc
6. Mineral Commodity Summaries (2025) Version 1.2: U.S. Geological Survey
7. Wang Y, Suraneni P (2023) Thermal activation of inert basaltic materials to create supplementary cementitious materials. Cement 13:100082. https://doi.org/10.1016/j.cement.2023.10008210.1016/j.cement.2023.100082 ↗
8. Lake DJ (2023) In-flight vitrification of granitic aggregate: characterization and performance of a scalable supplementary cementitious material. Constr Build Mater 409:133980. https://doi.org/10.1016/j.conbuildmat.2023.13398010.1016/j.conbuildmat.2023.133980 ↗
9. Zunino F, Scrivener K (2022) Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination. Mater Struct. https://doi.org/10.1617/s11527-021-01858-910.1617/s11527-021-01858-9 ↗
10. Tole I, Habermehl-Cwirzen K, Cwirzen A (2019) Mechanochemical activation of natural clay minerals: an alternative to produce sustainable cementitious binders – review. Mineral Petrol 113:449–462. https://doi.org/10.1007/s00710-019-00666-y10.1007/s00710-019-00666-y ↗
11. Souri A, Kazemi-Kamyab H, Snellings R, Naghizadeh R, Golestani-Fard F, Scrivener K (2015) Pozzolanic activity of mechanochemically and thermally activated kaolins in cement. Cem Concr Res 77:47–59. https://doi.org/10.1016/j.cemconres.2015.04.01710.1016/j.cemconres.2015.04.017 ↗
12. Bizley D (2023) thyssenkrupp polysius presents new meca-clay clinker reduction solution. World Cement. Accessed on 31 Dec 2025. Available online: https://www.worldcement.com/product-news/12122023/thyssenkrupp-polysius-presents-new-meca-clay-clinker-reduction-solution/
13. Lloyd-Perks A (2025) The mechanochemical shift. World Cement. Accessed on 31 Dec 2025. Available online: https://www.worldcement.com/special-reports/19052025/the-mechanochemical-shift/
14. Seco A, Martín-Antunes MA, Espuelas S, Fernández A, Prieto E (2025) Mechanochemical activation of non-conventional precursors for use as suplementary cementitious materials. Appl Clay Sci 266:107705. https://doi.org/10.1016/j.clay.2025.10770510.1016/j.clay.2025.107705 ↗
15. Baki VA, Ke X, Heath A, Calabria-Holley J, Terzi C, Sirin M (2022) The impact of mechanochemical activation on the physicochemical properties and pozzolanic reactivity of kaolinite, muscovite and montmorillonite. Cem Concr Res 162:106962. https://doi.org/10.1016/j.cemconres.2022.10696210.1016/j.cemconres.2022.106962 ↗
16. Feng Y, Kero J, Yang Q, Chen Q, Engström F, Samuelsson C, Qi C (2019) Mechanical activation of granulated copper slag and its influence on hydration heat and compressive strength of blended cement. Materials (Basel) 12:772. https://doi.org/10.3390/ma1205077210.3390/ma12050772 ↗
17. Őze C, Badacsonyi N, Makó É (2024) Mechanochemical activation of waste clay brick powder with addition of waste glass powder and its influence on pozzolanic reactivity. Molecules 29:5740. https://doi.org/10.3390/molecules2923574010.3390/molecules29235740 ↗
18. Rajczakowska M, Kothari A, Buasiri T, Cwirzen A (2025) Recycled and mechanically activated concrete fines as a complete substitute for Portland cement − feasibility and life cycle assessment. Case Stud Constr Mater 22:e04798. https://doi.org/10.1016/j.cscm.2025.e0479810.1016/j.cscm.2025.e04798 ↗
19. USACE (2025) Beneficial Use of Dredged Material. US Army Corps of Engineers Beneficial Use Program. Accessed on 24 May 2026. Available online: https://www.usace.army.mil/Missions/Civil-Works/Beneficial-Use-Program/
20. US EPA O (2026) Energy Recovery from the Combustion of Municipal Solid Waste (MSW). Sustainable Materials Management. Accessed on 24 May 2026. Available online: https://www.epa.gov/smm/energy-recovery-combustion-municipal-solid-waste-msw
21. USDOT (2016) Quarry By-Products - Material Description - User Guidelines for Waste and Byproduct Materials in Pavement Construction. Federal Highway Administration Research and Technology. Accessed on 24 May 2026. Available online: https://www.fhwa.dot.gov/publications/research/infrastructure/pavements/97148/044.cfm
22. Msinjili NS, Gluth GJG, Sturm P, Vogler N, Kühne H-C (2019) Comparison of calcined illitic clays (brick clays) and low-grade kaolinitic clays as supplementary cementitious materials. Mater Struct 52:94. https://doi.org/10.1617/s11527-019-1393-210.1617/s11527-019-1393-2 ↗
23. Hu Y, Xiong L, Yan Y, Geng G (2024) Performance of limestone calcined clay cement (LC3) incorporating low-grade marine clay. Case Stud Constr Mater 20:e03283. https://doi.org/10.1016/j.cscm.2024.e0328310.1016/j.cscm.2024.e03283 ↗
24. Bediako M, Gawu SKY, Adjaottor AA, Ankrah JS (2016) Early and late strength characterization of Portland cement containing calcined low-grade kaolin clay. J Eng 2016:1–5. https://doi.org/10.1155/2016/721089110.1155/2016/7210891 ↗
25. Amroun S, Galli L, Tahlaiti M, Suraneni P (2025) Mechanochemical activation of basaltic fines. Cem Concr Res 195:107923. https://doi.org/10.1016/j.cemconres.2025.10792310.1016/j.cemconres.2025.107923 ↗
26. Goncharov A, Zhutovsky S (2023) Comparison of different approaches for quantification of amorphous phase in hydrated cement paste by XRD. In: Jędrzejewska A, Kanavaris F, Azenha M, Benboudjema F, Schlicke D (eds) International RILEM conference on synergising expertise towards sustainability and robustness of cement-based materials and concrete structures. Springer Nature Switzerland, Cham, pp 449–45910.1007/978-3-031-33211-1_40 ↗
27. Stetsko YP, Shanahan N, Deford H, Zayed A (2017) Quantification of supplementary cementitious content in blended Portland cement using an iterative Rietveld–PONKCS technique. J Appl Crystallogr 50:498–507. https://doi.org/10.1107/S160057671700296510.1107/S1600576717002965 ↗
28. Suraneni P, Weiss J (2017) Examining the pozzolanicity of supplementary cementitious materials using isothermal calorimetry and thermogravimetric analysis. Cem Concr Compos 83:273–278. https://doi.org/10.1016/j.cemconcomp.2017.07.00910.1016/j.cemconcomp.2017.07.009 ↗
29. Bentz DP, Stutzman PE (2006) Curing, hydration, and microstructure of cement paste. ACI Mater J. https://doi.org/10.14359/1815710.14359/18157 ↗
30. Mindat.Org - Mines, Minerals and More. Accessed on 1 Jan 2026. Available online: https://www.mindat.org/
31. Mako E, Frost R, Kristóf J, Horvath E (2001) The effect of quartz content on the mechanochemical activation of kaolinite. J Colloid Interface Sci 244:359–364. https://doi.org/10.1006/jcis.2001.795310.1006/jcis.2001.7953 ↗
32. Leukel S, Panthöfer M, Mondeshki M, Kieslich G, Wu Y, Krautwurst N, Tremel W (2018) Mechanochemical access to defect-stabilized amorphous calcium carbonate. Chem Mater 30:6040–6052. https://doi.org/10.1021/acs.chemmater.8b0233910.1021/acs.chemmater.8b02339 ↗
33. Scrivener K, Snellings R, Lothenbach B (2018) A practical guide to microstructural analysis of cementitious materials. CRC Press10.1201/b19074 ↗
34. Calcium Carbonate (2016) Profiles of drug substances, excipients and related methodology, Vol 41, pp. 31–132. Elsevier. ISBN 978-0-12-804784-210.1016/bs.podrm.2015.11.003 ↗
35. Béres KA, Németh P, Kótai L (2025) Review on chemistry of water-containing calcium carbonates and their transformations into amorphous and crystalline carbonate modifications. Inorganics 13:321. https://doi.org/10.3390/inorganics1310032110.3390/inorganics13100321 ↗
36. Baki VA, Ke X, Heath A, Calabria-Holley J, Terzi C (2024) Improving the pozzolanic reactivity of clay, marl and obsidian through mechanochemical or thermal activation. Mater Struct 57:9. https://doi.org/10.1617/s11527-023-02280-z10.1617/s11527-023-02280-z ↗
37. Wang Y, Ramanathan S, Burris L, Hooton RD, Shearer CR, Suraneni P (2022) Reactivity of unconventional fly ashes, SCMs, and fillers: effects of sulfates, carbonates, and temperature. Adv Civ Eng Mater 11:639–657. https://doi.org/10.1520/ACEM2022000310.1520/ACEM20220003 ↗
38. Kalina RD, Al-Shmaisani S, Ferron RD, Juenger MCG (2019) False positives in ASTM C618 specifications for natural pozzolans. ACI Mater J. https://doi.org/10.14359/5171224310.14359/51712243 ↗
39. Panda S, Pestana LR, Suraneni P (2026) Reactivity and reaction kinetics of calcium aluminosilicate glasses. Mater Struct 59:24. https://doi.org/10.1617/s11527-025-02905-510.1617/s11527-025-02905-5 ↗
40. Sofiane A, Prannoy S (2026) An exploration of mechanochemical activation on various potential supplementary cementitious materials. J Am Ceram Soc
41. Hazarika A, Huang L, Erlingsson S, De Weerdt K, Löfgren I, Iftikhar S, Babaahmadi A (2025) Characterization, activation and reactivity – a case study of Nordic volcanic materials for application as supplementary cementitious materials. Case Stud Constr Mater 22:e04096. https://doi.org/10.1016/j.cscm.2024.e0409610.1016/j.cscm.2024.e04096 ↗
42. Ramanathan S, Perumal P, Illikainen M, Suraneni P (2021) Mechanically activated mine tailings for use as supplementary cementitious materials. RILEM Tech Letter 6:61–69. https://doi.org/10.21809/rilemtechlett.2021.14310.21809/rilemtechlett.2021.143 ↗
43. Oey T, Kumar A, Bullard JW, Neithalath N, Sant G (2013) The filler effect: the influence of filler content and surface area on cementitious reaction rates. J Am Ceram Soc 96:1978–1990. https://doi.org/10.1111/jace.1226410.1111/jace.12264 ↗
44. Zeng Q, Li K, Fen-chong T, Dangla P (2012) Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes. Constr Build Mater 27:560–569. https://doi.org/10.1016/j.conbuildmat.2011.07.00710.1016/j.conbuildmat.2011.07.007 ↗
45. Zunino F, Scrivener K (2019) The influence of the filler effect on the sulfate requirement of blended cements. Cem Concr Res 126:105918. https://doi.org/10.1016/j.cemconres.2019.10591810.1016/j.cemconres.2019.105918 ↗
46. Kumar A, Oey T, Falzone G, Huang J, Bauchy M, Balonis M, Neithalath N, Bullard J, Sant G (2017) The filler effect: the influence of filler content and type on the hydration rate of tricalcium silicate. J Am Ceram Soc 100:3316–3328. https://doi.org/10.1111/jace.1485910.1111/jace.14859 ↗
47. Ye S, Feng P, Liu Y, Liu J, Bullard JW (2020) Dissolution and early hydration of tricalcium aluminate in aqueous sulfate solutions. Cem Concr Res 137:106191. https://doi.org/10.1016/j.cemconres.2020.10619110.1016/j.cemconres.2020.106191 ↗
48. Gácsi A, Kutus B, Kónya Z, Kukovecz Á, Pálinkó I, Sipos P (2016) Estimation of the solubility product of hydrocalumite-hydroxide, a layered double hydroxide with the formula of [Ca2Al(OH)6]OH·nH2O. J Phys Chem Solids 98:167–173. https://doi.org/10.1016/j.jpcs.2016.07.00410.1016/j.jpcs.2016.07.004 ↗
49. Huang L, Yan P (2019) Effect of alkali content in cement on its hydration kinetics and mechanical properties. Constr Build Mater 228:116833. https://doi.org/10.1016/j.conbuildmat.2019.11683310.1016/j.conbuildmat.2019.116833 ↗
50. Cardinaud G, Rozière E, Martinage O, Loukili A, Barnes-Davin L, Paris M, Deneele D (2021) Calcined clay – limestone cements: hydration processes with high and low-grade kaolinite clays. Constr Build Mater 277:122271. https://doi.org/10.1016/j.conbuildmat.2021.12227110.1016/j.conbuildmat.2021.122271 ↗
51. Miah MJ, Huaping R, Paul SC, Babafemi AJ, Li Y (2023) Long-term strength and durability performance of eco-friendly concrete with supplementary cementitious materials. Innov Infrastruct Solut 8:255. https://doi.org/10.1007/s41062-023-01225-310.1007/s41062-023-01225-3 ↗
52. Suraneni P, Hajibabaee A, Ramanathan S, Wang Y, Weiss J (2019) New insights from reactivity testing of supplementary cementitious materials. Cem Concr Compos 103:331–338. https://doi.org/10.1016/j.cemconcomp.2019.05.01710.1016/j.cemconcomp.2019.05.017 ↗
53. Boghetich G, Liberti L, Notarnicola M, Palma M, Petruzzelli D (2005) Chloride extraction for quality improvement of municipal solid waste incinerator ash for the concrete industry. Waste Manag Res 23:57–61. https://doi.org/10.1177/0734242X0505101710.1177/0734242X05051017 ↗
54. Yoobanpot N, Jamsawang P, Poorahong H, Jongpradist P, Likitlersuang S (2020) Multiscale laboratory investigation of the mechanical and microstructural properties of dredged sediments stabilized with cement and fly ash. Eng Geol 267:105491. https://doi.org/10.1016/j.enggeo.2020.10549110.1016/j.enggeo.2020.105491 ↗
55. Kang S, Wang J, Hu C, Yao H, Sun H, Wu W, Wang X, Huang M, Hu M (2024) The influence of mechanochemical activation on the rheological properties and strength development of geopolymer. J Build Eng 96:110585. https://doi.org/10.1016/j.jobe.2024.11058510.1016/j.jobe.2024.110585 ↗
56. Elbasri OMM, Nser S, Shubaili M, Abdullah GMS, Zeyad AM (2022) Performance of self-compacting concrete incorporating wastepaper sludge ash and pulverized fuel ash as partial substitutes. Case Stud Constr Mater 17:e01459. https://doi.org/10.1016/j.cscm.2022.e0145910.1016/j.cscm.2022.e01459 ↗
57. Lopez M, Castro JT (2010) Effect of natural pozzolans on porosity and pore connectivity of concrete with time. Rev Ing Constr 25:419–43110.4067/S0718-50732010000300006 ↗