journal article·2026-07-30

Evolution mechanism and control of edge wave defects in cold-roll formed TA2 tubes

Bin yanb_1988@163.com Yan, Hairui Li, Guocheng Zhang, Xiaoli Liu, Juzheng Feng

Publisher page

Abstract

Abstract Edge wave defects occurring during the roll forming process of circular tubes are one of the most common issues in engineering .The aim of this study is to clarify the causes of edge wave formation through numerical simulations and experiments, and to optimize the edge wave defects generated by round pipes. Based on the basic theory of the roll bending process and the actual production conditions, a roll bending forming scheme for a thin-walled circular TA2 pipe is designed. Moreover, a model of the pure TA2 titanium material were established to predict the generation of edge waves in tubes, a finite element model of tube continuous roll forming, and a roll bending experimental platform were established. The accuracy of the finite element model was verified. The results indicate that the longitudinal stress is the main factor affecting edge wave defects. By combining the dual-radius forming method and the uphill forming method, an edge wave control strategy is proposed, which can effectively prevent the formation of edge wave defects. Furthermore, industrial experiments were conducted, which proved that the forming strategy can effectively control the edge wave defects of the circular TA2 tube. The number of edge waves decreased from an average of 4 per meter to 0.
Source: crossref · Quality: baseline

Affiliations

Anyang Institute of Technology

West China Tianfu Hospital

Hebei University of Engineering

Funding

Natural Science Foundation of Henan Province

References

Reference metadata was not supplied for this record.