Two-Step Simple Synthesis of Nanoscale Carbon Spheres via the Stöber Method Using Black Wattle Tannin as an Eco-Friendly Precursor for Supercapacitor Applications
Source abstract
Abstract
The growing demand for sustainable energy storage solutions has prompted the exploration of eco-friendly materials for supercapacitor applications. In this study, we present a simple two-step synthesis of nanoscale carbon spheres using a modified Stöber method, employing black wattle tannin extracted from Acacia mearnsii as a carbon precursor, in comparison with the conventional resorcinol precursor. Morphological characterization revealed that highly homogeneous nanoscale spheres were obtained. Physicochemical characterizations indicated that the tannin-derived spheres exhibited residual silica content due to incomplete template removal, which increased series resistance and limited the material's performance. Although inferior to resorcinol-derived spheres, which achieved a specific surface area of 2093 m2g−1, the tannin-derived material still exhibited a high surface area of 457 m2g−1 and a specific capacitance of 66.3 F g−1 in aqueous H2SO4 electrolyte, with well-defined morphology achieved without an activation step. By using an environmentally friendly precursor, we successfully produced a material with a homogeneous and well-defined structure, high surface area, and obtained through a simple two-step process of polymerization and carbonization without additional activation. These findings may open new directions for future research.
Source: crossref · Quality: baseline
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal do Rio Grande do Sul, Brasil
Universidad de la República, Uruguay; Universidad de la República, Uruguay
Instituto Nacional de Pesquisas Espaciais, Brasil
Funding
CAPES · CNPq
References (62)
Show source-provided references
1. A comprehensive review on supercapacitor applications and developments10.3390/en15030674 ↗
2. Modern Supercapacitors technologies and their applicability in mature electrical engineering applications10.3390/en15207752 ↗
3. Supercapacitor technology and its applications: a review
4. The need for energy storage on renewable energy generator outputs to lessen the Geeth effect, i.e. short-term variations mainly associated with wind turbine active power output10.1016/j.egyr.2022.12.040 ↗
5. A review of supercapacitors: materials, technology, challenges, and renewable energy applications10.1016/j.est.2024.112563 ↗
6. Carbon spheres10.1016/j.mser.2010.06.017 ↗
7. Recent advances in the fabrication and functionalization of nanostructured carbon spheres for energy storage applications10.14356/kona.2023016 ↗
8. Hollow nano- and microstructures: mechanism, composition, applications, and factors affecting morphology and performance10.1016/j.ccr.2022.214429 ↗
9. Yolk-shell V2O3/nitrogen-doped carbon spheres as an ultra-long life anode for half/full sodium-ion batteries
10. A multiple coating route to hollow carbon spheres with foam-like shells and their applications in supercapacitor and confined catalysis10.1039/c3ta14881e ↗
11. Controlled synthesis of ultrathin hollow mesoporous carbon nanospheres for supercapacitor applications10.1021/ie403950t ↗
12. CVD generated mesoporous hollow carbon spheres as supercapacitors10.1016/j.colsurfa.2012.01.002 ↗
13. Controllable synthesis of functional hollow carbon nanostructures with dopamine as precursor for supercapacitors10.1021/acsami.5b05035 ↗
14. Nanoporous hollow carbon spheres derived from fullerene assembly as electrode materials for high-performance supercapacitors10.3390/nano13050946 ↗
15. Synthesis of carbon spheres by atmospheric pressure chemical vapor deposition from a serial of aromatic hydrocarbon precursors10.1016/j.physe.2019.04.007 ↗
16. Controlled growth of monodisperse silica spheres in the micron size range10.1016/0021-9797(68)90272-5 ↗
17. Extension of the Stöber method to the preparation of monodisperse resorcinol-formaldehyde resin polymer and carbon spheres10.1002/anie.201102011 ↗
18. Controlling particle size in the Stöber process and incorporation of calcium10.1016/j.jcis.2016.01.065 ↗
19. Advances in tailoring resorcinol-formaldehyde organic and carbon gels10.1002/adma.201100283 ↗
20. Resorcinol-formaldehyde derived carbon xerogels: A promising anode material for lithium-ion battery10.1557/jmr.2017.461 ↗
21. Entrapping polysulfides using mesoporous carbon hollow spheres with controlled internal SiO2 content for lithium–sulfur batteries10.1007/s10853-023-08430-6 ↗
22. One-step synthesis of silica@resorcinol–formaldehyde spheres and their application for the fabrication of polymer and carbon capsules10.1039/c2cc32552g ↗
23. A química e toxicidade dos corantes de cabelo
24. Tannin gels and their carbon derivatives: a review10.3390/biom9100587 ↗
25. Progress in the use of biosourced phenolic molecules for electrode manufacturing10.3389/fmats.2022.810575 ↗
26. Tannins from Acacia mearnsii De Wild. Bark: Tannin Determination and Biological Activities10.3390/molecules23040837 ↗
27. Optimization of tannin-derived hard carbon spheres for high-performance sodium-ion batteries10.1039/D2TA07951H ↗
28. Modified tannin extracted from black wattle tree as an environmentally friendly antifouling pigment10.1016/j.indcrop.2014.10.033 ↗
29. Black Wattle Tannin as steel corrosion inhibitor
30. Tannin-based carbon xerogel as a promising co-catalyst for photodegradation processes based on solar light: a case study using the tin (IV) oxide/carbon xerogel composite10.1080/00986445.2021.1978076 ↗
31. Hydrothermal synthesis of biobased carbonaceous composite from a blend of kraft black liquor and tannin and its application to aspirin and paracetamol removal
32. Nitrogen-doped carbon materials produced from hydrothermally treated tannin10.1016/j.carbon.2012.07.027 ↗
33. Synthesis and properties of carbon gels based on larch Bark Tannins and Hydrolysis Lignin10.1134/S1070427222030089 ↗
34. Tannin-based nanoscale carbon spherogels as electrodes for electrochemical applications10.1021/acsanm.1c03431 ↗
35. Stöber synthesis of tannic acid-formaldehyde resin polymer spheres and their derived carbon nanospheres and nanocomposites for oxygen reduction reaction10.1016/j.jcis.2018.05.070 ↗
36. Physical and chemical activation mechanisms of carbon materials based on the microdomain model10.1039/D1TA00765C ↗
37. Controllable synthesis of N-doped hollow-structured mesoporous carbon spheres by an amine-induced Stöber-silica/carbon assembly process10.1039/C6TA03748H ↗
38. Hollow carbon spheres, synthesis and applications – a review10.1039/C6TA03802F ↗
39. Constructing T-Nb2O5@Carbon hollow core-shell nanostructures for high-rate hybrid supercapacitor10.1016/j.jpowsour.2018.06.007 ↗
40. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
41. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
42. Fundamentals of the theory of adsorption in micropores of carbon adsorbents: characteristics of their adsorption properties and microporous structures10.1016/0008-6223(89)90078-X ↗
43. Best practice methods for determining an electrode material’s performance for ultracapacitors10.1039/c0ee00074d ↗
44. Fabricating an Aqueous Symmetric Supercapacitor with a Stable High Working Voltage of 2 V by Using an Alkaline–Acidic Electrolyte
45. Optimization of tannin-derived hard carbon spheres for high-performance sodium-ion batteries10.1039/D2TA07951H ↗
46. Carbon spheres prepared by amino acid-catalyzed resorcinol-formaldehyde polymerization for supercapacitors
47. Biobased ordered porous materials in the nano-to microscales10.1016/j.cocis.2024.101822 ↗
48. Unique bimodal carbon xerogels from soft templating of tannin10.1016/j.matchemphys.2014.10.006 ↗
49. Energy storage in supercapacitors: focus on tannin-derived carbon electrodes10.3389/fmats.2020.00217 ↗
50. Raman spectrum of graphite10.1063/1.1674108 ↗
51. Raman spectroscopy of nascent soot oxidation: structural analysis during heating10.3389/fenrg.2022.878171 ↗
52. Amorphous materials emerging as prospective electrodes for electrochemical energy storage and conversion10.1016/j.chempr.2023.03.032 ↗
53. Synergistic interaction between redox-active electrolyte and binder-free functionalized carbon for ultrahigh supercapacitor performance10.1038/ncomms3923 ↗
54. Synthesis of perfectly ordered mesoporous carbons by water-assisted mechanochemical self-assembly of tannin10.1039/C8GC02295J ↗
55. Model carbon materials derived from tannin to assess the importance of pore connectivity in supercapacitors10.1016/j.rser.2021.111600 ↗
56. The complementary advanced characterization and electrochemical techniques for electrode materials for supercapacitors
57. Extrinsic pseudocapacitance: tapering the borderline between pseudocapacitive and battery type electrode materials for energy storage applications
58. Design, machining and characterization of the components required for the manufacture of a supercapacitor
59. Recent progress in carbon-based materials for supercapacitor electrodes: a review10.1007/s10853-020-05157-6 ↗
60. A sustainable approach to hierarchically porous carbons from tannic acid and their utilization in supercapacitive energy storage systems10.1039/C9TA01712G ↗
61. New insights into the chemical activation of lignins and tannins using K2CO3: a combined thermoanalytical and structural study10.1007/s42823-023-00601-4 ↗
62. Polarizing and equalizing trends in international trade and Sustainable Development Goals10.1038/s41893-024-01397-5 ↗