journal article·2025

Mechanical Performance of Plywood Bonded with Castor Oil-based Polyurethane Resin Enhanced by Nanocellulose

Luana Cristal Lirya Silva, Sandro de Souza Monteiro Filho, Felipe Oliveira Lima, Cristiane Inácio de Campos

Materials Research· Volume 28· Issue suppl 1
Publisher page

Abstract

The study of engineered wood products has expanded due to their production from renewable raw materials. While wood products have traditionally seen limited use in Brazil, they have gained significant traction over the past two decades, fueled by new products and technological advancements. Among emerging materials, nanocellulose has shown promise due to its potential to enhance the adhesive performance and mechanical properties of wood-based panels. This study aimed to incorporate cellulose nanofibers obtained by mechanical defibrillation of pulp from the extraction of the Eucalyptus grandis by kraft process in proportions of 0% and 5% into a castor oil-based polyurethane adhesive commercial to produce plywood panels. The mechanical properties of the panels were analyzed, specifically focusing on static bending strength both parallel and perpendicular to the wood fibers, as well as bond quality through shear testing along the glue line. Results indicated that adding nanocellulose to the polyurethane resin significantly enhanced the mechanical performance of the plywood panels. Additionally, it was observed that using eucalyptus wood veneers with polyurethane resin alone already resulted in improved mechanical properties compared to conventional adhesives. Thermal analysis, suggested that nanocellulose incorporation increased the resin's thermal stability, potentially contributing to enhanced durability. Further studies are recommended to explore the viability of nanocellulose at different proportions and its long-term effects on adhesive performance.
Source: crossref · Quality: baseline

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidade Estadual Paulista, Brasil

Faculdade de Ciências Sociais e Agrárias de Itapeva, Brasil

Universidade Estadual Paulista, Brasil; Universidade Estadual Paulista, Brasil

Funding

CAPES · CNPq

References (22)

Show source-provided references
1. Marchesan R · 2019
2. Chemical composition of melamine-urea-formaldehyde (MUF) resins assessed by near-infrared (NIR) spectroscopy10.1016/j.ijadhadh.2019.01.021 ↗
3. Static bending strength of heat-treated and chromated copper arsenate-treated plywood10.15376/biores.12.3.6276-6282 ↗
4. Properties of plywood produced with urea-formaldehyde adhesive modified with nanocellulose and microcellulose10.5552/drvind.2020.1919 ↗
5. The application of oak bark powder as a filler for melamine-urea-formaldehyde adhesive in plywood manufacturing10.3390/f11121249 ↗
6. Evolução econômica do painel compensado no Brasil e no mundo10.4322/floram.2012.033 ↗
7. Produção de compensados de Pinus taeda e Pinus oocarpa com resina fenol-formaldeído
8. Life cycle assessment of wood-based boards produced in Japan and impact of formaldehyde emissions during the use stage10.1007/s11367-017-1343-6 ↗
9. Thermal and gluing properties of phenol-based resin with lignin for potential application in structural composites10.3390/polym15020357 ↗
10. Alternative castor oil-based polyurethane adhesive used in the production of plywood10.1590/S1516-14392004000300007 ↗
11. Comparison of the properties of cellulose nanocrystals and cellulose nanofibrils isolated from bacteria, tunicate, and wood processed using acid, enzymatic, mechanical, and oxidative methods10.1021/am500359f ↗
12. Nanocellulose Applications in Wood Adhesives: review10.4236/ojpchem.2019.94006 ↗
13. Nano-engineered plywood panels: performance properties10.1016/j.compositesb.2014.04.021 ↗
14. Self-sustained films of cellulose/graphite composites: mechanical and water vapor barrier properties10.1590/1980-5373-mr-2023-0046 ↗
15. Properties of plywood made of thermally treated veneers bonded with castor oil-based polyurethane adhesive10.3390/f14081635 ↗
16. Development of nanocellulose for studies of iron speciation in aquatic systems
17. 2021
18. 2022
19. 2023
20. 2002
21. The reduction of adhe-sive application in plywood manufacturing by using nanocellulose-reinforced urea-formaldehyde resin10.1002/app.49834 ↗
22. Physical-mechanical and anatomical characterization in 26-year-old Eucalyptus