journal article·2025-12

Enhancing strength-ductility synergy and resistance to strain softening in Zn-1.0Cu-0.1Mg wire via the development of an ultra-refined microstructure

Chao Sun, Tianle Wang, Ziyue Xu, Jing Bai, Cheng Wang, Yi Shao, Qiangsheng Dong, Huan Liu, Feng Xue, Chenglin Chu

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

References (39)

Show source-provided references
1. Alloying design of biodegradable zinc as promising bone implants for load-bearing applications10.1038/s41467-019-14153-7 ↗
2. Recent advances on the mechanical behavior of zinc based biodegradable metals focusing on the strain softening phenomenon10.1016/j.actbio.2022.08.041 ↗
3. Toward high strength and large strain hardening zn alloys via a novel multiscale-heterostructure strategy10.1016/j.msea.2024.146410 ↗
4. Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn-Mg binary alloys10.1016/j.jmrt.2021.12.101 ↗
5. The high strength and ductility mechanism of Zn-0.45Mn-0.8Li alloys with heterogeneous lamellar structure10.1016/j.msea.2024.146853 ↗
6. Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable zn-li-mn-mg-cu alloys produced by rapid solidification and high-pressure torsion10.1016/j.msea.2023.146027 ↗
7. A high strength and ductility zn-cu-mg alloy achieved by bandlike distribution of ultra-fine CuZn5 and Mg2Zn11 particles10.1016/j.msea.2022.143584 ↗
8. Evolutions of CuZn5 and Mg2Zn11 phases during ECAP and their impact on mechanical properties of zn-cu-mg alloys10.1016/j.jmrt.2022.11.095 ↗
9. Revealing the abnormal softening mechanisms of Zn-xCu (x=2, 3) wrought alloys by gradually increasing ECAP numbers10.1016/j.msea.2022.143962 ↗
10. Effect of cumulative strain on the microstructural and mechanical properties of Zn-0.02 wt%mg alloy wires during room-temperature drawing process10.1016/j.jallcom.2018.01.059 ↗
11. Effect of equal-channel angular pressing on microstructural evolution, mechanical property and biodegradability of an ultrafine-grained zinc alloy10.1016/j.msea.2021.141857 ↗
12. Microstructure, texture, and mechanical properties of multi-pass cold drawn Mg-xZn alloy wire10.1016/j.jmrt.2023.10.238 ↗
13. Evolutions of microstructure and texture of Mg-Gd alloy wires processed by cold drawing10.1016/j.jmrt.2022.11.037 ↗
14. Diameter-dependent in vitro performance of biodegradable pure zinc wires for suture application10.1016/j.jmst.2019.03.006 ↗
15. Mechanical properties, crystallographic texture, and in vitro bio-corrosion of low-alloyed Zn–Mg, produced by hot and cold drawing for biodegradable surgical wires10.1007/s43452-021-00311-6 ↗
16. Manufacture technology, mechanical and biocorrosion properties of the Zn and ZnMg0.008 alloy wires designed for biodegradable surgical threads10.1016/j.jmapro.2021.05.024 ↗
17. Evolution of degradation mechanism and fixation strength of biodegradable Zn–Cu wire as sternum closure suture: an in vitro study10.1016/j.jmbbm.2023.105658 ↗
18. Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP10.1016/j.msea.2019.01.117 ↗
19. Effect of ECAP temperature on formation of triple heterogeneous microstructure and mechanical properties of Zn-1Cu alloy10.1016/j.msea.2021.141990 ↗
20. Investigation of zinc-copper alloys as potential materials for craniomaxillofacial osteosynthesis implants10.1016/j.msec.2019.109826 ↗
21. Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications10.1016/j.jmbbm.2017.05.013 ↗
22. Appropriately adapted properties of hot-extruded Zn-0.5Cu-xFe alloys aimed for biodegradable guided bone regeneration membrane application
23. Novel high-strength, low-alloys Zn-Mg (< 0.1 wt% Mg) and their arterial biodegradation10.1016/j.msec.2017.11.021 ↗
24. Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: in vitro and in vivo studies10.1016/j.jmst.2018.01.006 ↗
25. Novel Zn-based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
26. Effects of rolling processing on the microstructures, mechanical properties and strain softening behavior of biodegradable Zn-0.06 Mg alloy10.1016/j.jmrt.2024.01.166 ↗
27. Revealing the effect of minor Ca and Sr additions on microstructure evolution and mechanical properties of Zn-0.6 Mg alloy during multi-pass equal channel angular pressing10.1016/j.jallcom.2020.155923 ↗
28. Improving the mechanical properties and inhibiting strain softening behavior of the biodegradable Zn-0.06Mg alloy via ECAP plus rolling processing10.1016/j.pnsc.2024.01.015 ↗
29. Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants10.1016/j.matdes.2016.12.075 ↗
30. Development of Zn-2Cu-xMn/Mg alloys for orthopedic application: mechanical performance to in vitro degradation under different physiological environments10.1021/acsbiomaterials.3c00641 ↗
31. Effects of Cu content on the corrosion behavior, mechanical properties, cytocompatibility, and antibacterial performance of Zn-1Mg-xCu alloys10.1002/pssa.202300606 ↗
32. Refining 18R-LPSO phase into sub-micron range by pre-kinking design and its prominent strengthening effect on Mg97Y2Zn1 alloy10.1016/j.jmst.2023.07.051 ↗
33. Anomalous ductility-strength synergy occurred after cold rolling in a high Gd content Mg alloy10.1016/j.jmst.2024.03.076 ↗
34. Nanostructuring of Zn-Li-based alloys through severe plastic deformation: microstructure, mechanical properties, and corrosion behaviors
35. Characterization of nano precipitate phase in an as-extruded Zn-Cu alloy10.1016/j.scriptamat.2021.113907 ↗
36. 300 MPa grade biodegradable high-strength ductile low-alloy (BHSDLA) Zn-Mn-Mg alloys: an in vitro study10.1016/j.jmst.2022.08.015 ↗
37. Enhanced superplasticity of ultrafine-grained WEQ612 magnesium alloy via the coupling effect of grain boundary segregation and dense precipitation10.1016/j.msea.2024.146337 ↗
38. Crystallography of grain refinement in cast zinc-copper alloys10.1107/S1600576715008936 ↗
39. Fabrication of fine grain structures in Al matrices at elevated temperature by the stimulation of dual-size particles10.1016/j.msea.2020.140614 ↗