journal article·2025-11

Mo-driven strengthening mechanisms in cobalt-free Cr20-xFe30Mn20Ni30Mox high-entropy alloys

Yulin Li, Eryang Lu, Łukasz Kurpaska, Feng Fang, Tomasz Stasiak, Hyoung Seop Kim, William J. Weber, Yanwen Zhang, Wenyi Huo

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Mechanically derived short-range order and its impact on the multi-principal-element alloys10.1038/s41467-022-34470-8 ↗
4. Segregation of Ni at early stages of radiation damage in NiCoFeCr solid solution alloys10.1016/j.actamat.2020.06.024 ↗
5. Nanoprecipitates to enhance radiation tolerance in high-entropy alloys10.1021/acsami.2c17540 ↗
6. Cr-rich structure evolution and enhanced mechanical properties of CoCrFeNi high entropy alloys by mechanical alloying10.1016/j.jmrt.2024.03.116 ↗
7. Mechanical size effect of eutectic high entropy alloy: effect of lamellar orientation10.1016/j.jmst.2020.11.067 ↗
8. Microstructure and corrosion resistance of highly <111> oriented electrodeposited CoNiFe medium-entropy alloy films10.1016/j.jmrt.2022.07.175 ↗
9. Influence of chemical disorder on energy dissipation and defect evolution in concentrated solid solution alloys10.1038/ncomms9736 ↗
10. Strain-rate effect upon the tensile behavior of CoCrFeNi high-entropy alloys10.1016/j.msea.2017.02.077 ↗
11. Remarkable strength of CoCrFeNi high-entropy alloy wires at cryogenic and elevated temperatures10.1016/j.scriptamat.2017.08.006 ↗
12. Microstructural origins for a strong and ductile Al0.1CoCrFeNi high-entropy alloy with ultrafine grains10.1016/j.mtla.2018.10.015 ↗
13. Hetero-deformation-induced strengthening behavior of as-annealed Co30Cr30Fe18Ni18Mo4 high entropy alloy by metastable σ phase10.1016/j.msea.2022.144296 ↗
14. Aluminum alloying effects on lattice types, microstructures, and mechanical behavior of high-entropy alloys systems10.1007/s11837-013-0776-z ↗
15. Cooperative effect of Cr and Al elements on passivation enhancement of eutectic high-entropy alloy AlCoCrFeNi2.1 with precipitates10.1016/j.jmst.2022.07.023 ↗
16. Effect of Mo element on the mechanical properties and tribological responses of CoCrFeNiMox high-entropy alloys10.3390/met11030486 ↗
17. Effects of constituent elements and fabrication methods on mechanical behavior of high-entropy alloys: a review10.1007/s11661-018-4970-z ↗
18. Data-driven body-centered cubic phase prediction in cobalt-free high-entropy alloys
19. Designing cobalt-free face-centered cubic high-entropy alloys: a strategy using d-orbital energy level10.1016/j.ijrmhm.2024.106834 ↗
20. Atomistic insights into the irradiation resistance of Co-free high entropy alloy FeMnNiCr10.1007/s40195-024-01738-5 ↗
21. Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys10.1016/j.matchar.2012.05.005 ↗
22. Effect of Mo and Ni elements on microstructure evolution and mechanical properties of the CoFeNixVMoy high entropy alloys10.1016/j.jallcom.2015.07.185 ↗
23. Effect of Mo content on the microstructure and properties of Al0.5Fe2CrMnNiMox high entropy alloy
24. Effect of Mo addition on the microstructural evolution and mechanical properties of fe-ni-cr-mn-al-ti high entropy alloys10.1016/j.msea.2023.144579 ↗
25. Body-centered cubic phase stability in cobalt-free refractory high-entropy alloys
26. Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2016.09.208 ↗
27. A superior combination of strength-ductility in CoCrFeNiMn high-entropy alloy induced by asymmetric rolling and subsequent annealing treatment10.1016/j.matchar.2018.09.029 ↗
28. Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys10.1016/j.actamat.2018.09.040 ↗
29. Strengthening FCC-CoCrFeMnNi high entropy alloys by Mo addition10.1016/j.jmst.2018.10.009 ↗
30. Effect of molybdenum on phases, microstructure and mechanical properties of Al0.5CoCrFeMoxNi high entropy alloys10.1016/j.jallcom.2018.02.003 ↗
31. Effect of molybdenum additives on corrosion behavior of (CoCrFeNi)100-xMox high-entropy alloys10.3390/e20120908 ↗
32. Heterogeneous microstructure in nonequiatomic MoNbTaVW refractory high entropy alloy after high pressure torsion: evolution mechanisms and mechanical properties10.1016/j.msea.2022.144530 ↗
33. Nb doping in laser-cladded Fe25Co25Ni25(B0.7Si0.3)25 high entropy alloy coatings: microstructure evolution and wear behavior10.1016/j.surfcoat.2020.126321 ↗
34. Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy10.1016/j.actamat.2019.11.055 ↗
35. Significance of grain refinement on micro-mechanical properties and structures of additively-manufactured CoCrFeNi high-entropy alloy10.1016/j.msea.2021.140898 ↗
36. Effect of second phase particles on mechanical properties and grain growth in a CoCrFeMnNi high entropy alloy10.1016/j.msea.2019.01.112 ↗
37. Hierarchical precipitates, sequential deformation-induced phase transformation, and enhanced back stress strengthening of the micro-alloyed high entropy alloy10.1016/j.actamat.2022.117974 ↗
38. A comparison study of dislocation density, recrystallization and grain growth among nickel, FeNiCo ternary alloy and FeNiCoCrMn high entropy alloy10.1016/j.jallcom.2019.03.052 ↗
39. The dislocation behaviour and GND development in a nickel based superalloy during creep10.1016/j.ijplas.2019.02.015 ↗
40. Evolution of microstructures, dislocation density and arrangement during deformation of low carbon lath martensitic steels10.1016/j.msea.2020.139039 ↗
41. Mechanism of dislocation evolution during plastic deformation of nitrogen-doped CoCrFeMnNi high-entropy alloy10.1016/j.msea.2021.141235 ↗
42. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
43. Beyond orowan hardening: mapping the four distinct mechanisms associated with dislocation-precipitate interaction10.1016/j.ijplas.2023.103710 ↗
44. Deformation and annealing behaviors of high-entropy alloy Al0.5CoCrCuFeNi10.1016/j.jallcom.2009.06.182 ↗
45. A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility10.1016/j.actamat.2022.117975 ↗
46. Effects of Ti and Mo additions on microstructures and mechanical properties of CoCrNi medium entropy alloys10.1016/j.msea.2025.147943 ↗
47. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
48. Microstructure and properties of bulk Al0.5CoCrFeNi high-entropy alloy by cold rolling and subsequent annealing10.1016/j.msea.2018.05.054 ↗
49. Effects of annealing on microstructure and mechanical properties of metastable powder metallurgy CoCrFeNiMo0.2 high entropy alloy10.3390/e21050448 ↗
50. Advancing strength and counteracting embrittlement by displacive transformation in heterogeneous high-entropy alloys containing sigma phase10.1016/j.actamat.2023.118717 ↗
51. Effect of annealing temperature on microstructure and mechanical properties of a severe cold-rolled FeCoCrNiMn high-entropy alloy10.1007/s11661-019-05231-y ↗
52. Dislocation dissociation assisted formation mechanism of sigma phase and its impact on producing heterogeneous lamellar microstructure in CoCrV medium-entropy alloy10.1016/j.ijplas.2025.104260 ↗
53. Effects of annealing treatment on microstructure and hardness of bulk AlCrFeNiMo0.2 eutectic high-entropy alloy10.1016/j.matdes.2015.05.046 ↗
54. Mitigation of strength-ductility trade-off of CoCrNi medium entropy alloys with heterogenous structure by controlled Gd addition and annealing10.1016/j.msea.2024.146630 ↗
55. Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures
56. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
57. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
58. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
59. Toward predictable phase structures in high-entropy oxides: a strategy for screening multicomponent compositions10.1016/j.matdes.2024.113497 ↗
60. Criterion for sigma phase formation in Cr- and V-containing high-entropy alloys10.1080/21663831.2013.831382 ↗
61. A criterion for topological close-packed phase formation in high entropy alloys10.3390/e17042355 ↗
62. Solid solubilities in transition-metal-based fcc alloys10.1080/01418610.1985.12069159 ↗
63. Effects of Nb on deformation-induced transformation and mechanical properties of HfNbxTa0.2TiZr high entropy alloys10.1016/j.msea.2021.140798 ↗
64. Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity10.1080/21663831.2016.1221861 ↗
65. Microstructural evolution and strengthening mechanisms in CrxMnFeNi high-entropy alloy10.1016/j.jmrt.2021.04.020 ↗
66. Strengthening mechanism of CoCrNiMox high entropy alloys by high-throughput nanoindentation mapping technique10.1016/j.intermet.2021.107209 ↗
67. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
68. Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2014.11.061 ↗
69. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
70. Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy10.1016/j.jmst.2022.06.009 ↗
71. Hierarchical microstructures and strengthening mechanisms of nano-TiC reinforced CoCrFeMnNi high-entropy alloy composites prepared by laser powder bed fusion10.1016/j.jmst.2022.06.053 ↗