journal article·2026-02

Capacitive-coupled non-pinched I–V and type II memristive behavior of carbon-TiO2 nanocomposite films fabricated through aerosol flame synthesis

Abdul Khalique, Gianluigi De Falco, Patrizia Minutolo, Mario Commodo, Andrea D'Anna

Publisher page

Abstract

Titanium dioxide (TiO2) is a long-established semiconductor material used in several electrical and electronical applications, including random-access memories, biohybrid interfaces, sensors, and neuromorphic computing. Nevertheless, such applications are still at an early development stage, constrained by fundamental gaps in understanding and technological limitations. Functional memristive characteristics of TiO2 rely extensively on the processes, including synthesis techniques, fabrication, and physicochemical modifications. In this work, nanostructured composite films of Carbon (Soot) and TiO2 are fabricated through a custom-made aerosol flame synthesis (AFS) reactor using a facile one-step synthesis technique with good control over nanostructure, crystallinity, defect chemistry and carbon component inclusions. Scanning mobility particle sizer (SMPS) was employed to analyze particle size distribution in the flame. Microstructures and composition of the C-TiO2 film were characterized through Raman spectroscopy, UV–VIS spectrophotometry, atomic force microscopy (AFM), and current-voltage I-V measurements. The presence of carbon and TiO2 across the film was confirmed by the Raman spectrum and quantified by light absorption. The electrical characterization demonstrated a capacitive-coupled non-zero crossing and type-II hysteresis behavior of the C-TiO2 nanostructured film. Following carbon compositing, TiO2 exhibited enhanced optical absorption in the visible spectral region and electrical conductivity. The improvement in the conduction pathways was evidenced by the I-V measurements of the TiO2 film and the C-TiO2 film. A phenomenon of disappearance and reappearance of the capacitive-coupled memresistive effect was observed after dark and sunlight exposure, most likely due to the photosensitive nature of TiO2 in the nanocomposite film. This proof-of-concept study testifies that, due to such properties, C-TiO2 nanocomposite films produced via AFS can be considered as promising future candidates for applications in the field of next-generation electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Polymorphism of nanocrystalline TiO2 prepared in a stagnation flame: formation of the TiO2-II phase10.1039/C8SC02969E ↗
3. Flame aerosol synthesis of smart nanostructured materials10.1039/b711652g ↗
4. Ultrafine anatase TiO2 nanoparticles produced in premixed ethylene stagnation flame at 1 atm10.1016/j.proci.2004.08.146 ↗
5. Flame synthesis of soot/TiO2 nanoparticle composite films with improved electrical properties characterized by Scanning Probe Microscopy
6. Scale-up of nanoparticle synthesis in diffusion flame reactors10.1016/j.ces.2003.07.010 ↗
7. Near room-temperature direct encapsulation of organic photovoltaics by plasma-based deposition techniques10.1088/1361-6463/50/2/024003 ↗
8. In vitro biodegradation, electrochemical corrosion evaluations and mechanical properties of an Mg/HA/TiO2 nanocomposite for biomedical applications10.1016/j.jallcom.2016.11.106 ↗
9. Recent advances in hybrid photocatalysts for solar fuel production10.1039/c2ee02849b ↗
10. Biogenic synthesis of Ag-doped TiO2 photocatalyst using citrus paradisi extract for solar trigged degradation of methylene blue
11. Photoenhanced degradation of cationic dye (Methylene blue) using biogenic titania from Malus Domestica extract10.1149/10701.14313ecst ↗
12. Antimicrobial activity of flame-synthesized nano-TiO2 coatings10.1039/C7EN00030H ↗
13. TIO2 nanoparticle coatings with advanced antibacterial and hydrophilic properties prepared by flame aerosol synthesis and thermophoretic deposition10.1016/j.surfcoat.2018.06.083 ↗
14. Innovation of TiO2-x nanomaterials in the biomedical field: synthesis, properties, and application prospects10.1016/j.cej.2024.151773 ↗
15. Titanium dioxide nanomaterials for sensor applications10.1021/cr400625j ↗
16. TiO2 in memristors and resistive random access memory devices
17. Mimicking synaptic plasticity based on TiO2/MgO film resistive switching device10.1016/j.mssp.2025.109695 ↗
18. Flame aerosol synthesis and characterization of pure and carbon coated titania nano powder10.1016/j.jaerosci.2009.04.003 ↗
19. Laser-based diagnostics in the gas-phase synthesis of inorganic nanoparticles10.1016/j.powtec.2015.10.015 ↗
20. In situ Raman characterization of nanoparticle aerosols during flame synthesis10.1007/s00340-010-4091-x ↗
21. Flame aerosol synthesis of nanostructured materials and functional devices: processing, modeling, and diagnostics10.1016/j.pecs.2016.04.002 ↗
22. TiO 2 photocatalysis: a historical overview and future prospects10.1143/JJAP.44.8269 ↗
23. A review of intensification of photocatalytic processes10.1016/j.cep.2007.05.012 ↗
24. TiO2@C nanocomposites – from synthesis to application: a review10.1080/1536383X.2020.1820994 ↗
25. Carbon coating of anatase-type TiO2 and photoactivity10.1039/b201942f ↗
26. Preparation of carbon-coated Magneli phases TinO2n−1 and their photocatalytic activity under visible light10.1016/j.apcatb.2008.09.009 ↗
27. A novel synthesis of carbon-coated anatase nanocrystals showing high adsorption capacity and photocatalytic activity10.1016/j.apcatb.2008.12.008 ↗
28. Carbon onions: carriers of the 217.5 nm Interstellar Absorption Feature10.1103/PhysRevLett.90.155504 ↗
29. Characterization and relative photonic efficiencies of a new nanocarbon/TiO2 composite photocatalyst designed for organic dye decomposition and bactericidal activity10.1016/j.msec.2008.10.034 ↗
30. Nanocomposites of TiO2 and reduced graphene oxide as efficient photocatalysts for hydrogen evolution10.1021/jp2008804 ↗
31. TiO2-graphene nanocomposites for gas-phase photocatalytic degradation of volatile aromatic pollutant: is TiO2-graphene truly different from other TiO2-carbon composite materials?10.1021/nn1024219 ↗
32. Photoinduced charge transfer processes in solar photocatalysis based on modified TiO210.1039/C5EE02575C ↗
33. Facile fabrication and characterization of multi-type carbon-doped TiO2 for visible light-activated photocatalytic mineralization of gaseous toluene10.1039/c3ta01366a ↗
34. Enhanced photocatalytic water splitting activity of carbon-modified TiO2 composite materials synthesized by a green synthetic approach10.1016/j.ijhydene.2012.02.067 ↗
35. Adsorption and catalytic removal of methyl orange from water by PIL-GO/TiO2/Fe3O4 composites10.1016/j.mssp.2022.107215 ↗
36. Platelet membrane-coated C-TiO2 hollow nanospheres for combined sonodynamic and alkyl-radical cancer therapy10.1007/s12274-022-4646-2 ↗
37. Enhancing the c-TiO2 based perovskite solar cell performance via modification by a serial of boronic acid derivative self-assembled monolayers10.1016/j.apsusc.2017.06.189 ↗
38. Production of the C/TiO2 composite with a high-performance electrochemical property from titanium-rich sludge via in-situ C coating10.1016/j.jes.2023.02.044 ↗
39. C-doped TiO2 nanoparticles to detect alcohols with different carbon chains and their sensing mechanism analysis10.1016/j.snb.2020.127942 ↗
40. Direct electrochemistry of hemoglobin on vertically aligned carbon hybrid TiO2 nanotubes and its highly sensitive biosensor performance10.1002/cjoc.201200883 ↗
41. TiO2@C core–shell nanowires for high-performance and flexible solid-state supercapacitors10.1039/C2TC00047D ↗
42. LED visible-light activated mesoporous TiO2: a better understanding about carbon role in the photocatalytic performance of solid10.1016/j.cattod.2020.10.015 ↗
43. Enhanced stability and electrochemical performance of carbon-coated Ti3+ self-doped TiO2-Reduced graphene oxide hollow nanostructure-supported Pt-Catalyzed fuel cell electrodes10.1002/admi.201700564 ↗
44. Improvement of switching uniformity in TiO2-based resistive random access memory with graphene oxide embedded film10.1016/j.mssp.2024.108688 ↗
45. Enhanced resistive switching performance of TiO2 based RRAM device with graphene oxide inserting layer10.1088/1361-6641/acc2df ↗
46. Sustainable resistance switching performance from composite-type ReRAM device based on carbon Nanotube@Titania core–shell wires
47. Improved resistive switching behavior of multiwalled carbon nanotube/TiO2 nanorods composite film by increased oxygen vacancy reservoir10.1016/j.mssp.2019.104907 ↗
48. Resistive switching phenomenon observed in self-assembled films of flame-formed carbon-tio2 nanoparticles10.3390/ma14164672 ↗
49. Soot volume fraction and temperature measurements in laminar nonpremixed flames using thermocouples10.1016/S0010-2180(97)00054-0 ↗
50. Optimization studies of photocatalytic tungsten-doped titania coatings deposited by reactive Magnetron Co-Sputtering10.3390/coatings3040194 ↗
51. Microwave-assisted synthesis of titania–amorphous carbon nanotubes/amorphous nitrogen-doped carbon nanotubes nanohybrids for photocatalytic degradation of textile wastewater10.1039/D0RA08191D ↗
52. Understanding polymorphic phase transformation behavior during growth of nanocrystalline aggregates: insights from TiO210.1021/jp000499j ↗
53. TiO2 photocatalyst for water treatment applications10.1016/j.jiec.2013.07.012 ↗
54. Control of interface between anatase TiO2 nanoparticles and rutile TiO2 nanorods for efficient photocatalytic H2 generation10.1016/j.jpowsour.2017.11.067 ↗
55. Titanium dioxide nanomaterials: synthesis, properties, modifications and applications10.1021/cr0500535 ↗
56. Titania-based photocatalysts—crystal growth, doping and heterostructuring10.1039/B909930A ↗
57. Nanoionics-based resistive switching memories10.1038/nmat2023 ↗
58. Manuputty · 2019
59. Mineralization of Azo Dye using combined photo-fenton and photocatalytic processes under visible light
60. Urbach tail of anatase10.1103/PhysRevB.52.7771 ↗
61. Theory of carbon doping of titanium dioxide10.1021/cm051921h ↗
62. The optical band gap model in the interpretation of the UV-visible absorption spectra of rich premixed flames10.1016/S0082-0784(96)80307-9 ↗
63. Experimental and computational determinations of optical band gaps for PAH and soot in a N2-diluted, ethylene/air non-premixed flame10.1016/j.proci.2012.05.054 ↗
64. Growth of undoped and Fe doped TiO2 nanostructures and their optical and photocatalytic properties10.1007/s00339-012-7367-7 ↗
65. The elusive history of m∼= 1.57 – 0.56i for the refractive index of soot10.1016/S0010-2180(96)00170-8 ↗
66. Investigation of morphological and electrical properties of RTA-processed TiO2 for memristor application10.1007/s10971-020-05395-9 ↗
67. Capacitive coupled non-zero I–V and type-II memristive properties of the NiFe2O4–TiO2 nanocomposite10.1016/j.mssp.2020.105646 ↗
68. Three fingerprints of memristor
69. Recommended methods to Study resistive switching devices10.1002/aelm.201800143 ↗
70. Memristive devices and systems10.1109/PROC.1976.10092 ↗
71. Pinched hysteretic loops of ideal memristors, memcapacitors and meminductors must be ‘self-crossing10.1049/el.2011.2913 ↗
72. Memristive TiO2: Synthesis, technologies, and applications10.3389/fchem.2020.00724 ↗
73. Non–zero-crossing current-voltage hysteresis behavior in memristive system
74. Resistive switching phenomena: a review of statistical physics approaches10.1063/1.4929512 ↗
75. Bipolar resistive switching in TiO2 artificial synapse mimicking Pavlov's associative learning10.1021/acsami.2c17228 ↗
76. Coexistence of memory resistance and memory capacitance in TiO2 solid-state devices10.1186/1556-276X-9-552 ↗
77. Mechanism and application of capacitive-coupled memristive behavior based on a biomaterial developed memristive device10.1021/acsaelm.1c00951 ↗
78. The role of oxygen vacancies in resistive switching behavior of organic-TiO2 hybrid composite10.1007/s00339-017-1219-4 ↗
79. Light-enhanced negative differential resistance and multi-level resistive switching in glutamine-functionalized MoS2 quantum dots for resistive random-access memory devices10.1002/admi.202201537 ↗
80. Light-induced multilevel resistive switching in cesium-doped lead-free halide double perovskite memory device10.1016/j.jallcom.2024.175827 ↗
81. Multilevel programming and light-assisted resistive switching in a halide-tunable all-inorganic perovskite cube for flexible memory devices10.1021/acsaelm.0c00719 ↗