journal article·2026-09

Sandwich structured functional separator with enhanced ion flux homogenization for long life aqueous zinc batteries

Keyi Xie, Yupeng Xing, Yangyu Zhai, Tao Chen, Ruijia Liu, Hongfei Li, Xiaotao Sun

Publisher page

Abstract

Aqueous zinc-ion batteries (AZIBs) are promising candidates for large-scale energy storage due to their intrinsic safety and low cost. Yet the use of conventional aqueous battery separators impede homogeneous Zn plating and leads to restricted cell cycle life during repeated Zn plating/stripping, thereby limiting the long-term cycling lifespan of AZIBs. Herein, a biomass-derived sandwich structured composite separator (HC@PP/MCE) is rationally designed to regulate ion transport and interfacial kinetics. By anchoring a sulfonated cellulose functional layer onto a mechanically robust PP substrate and incorporating a mixed cellulose ester (MCE) transport layer, the HC@PP/MCE separator constructs an interfacial ion enrichment and buffer zone. This structure homogenizes the Zn2+ flux and mitigates concentration polarization effects. As a result, the composite separator significantly enhances Zn2+ transport selectivity and kinetics, delivering a high Zn2+ transference number of 0.62 while effectively suppressing interfacial side reactions. Benefiting from these synergistic effects, Zn||Zn symmetric cells exhibit exceptional cycling stability over 2500 h at 1 mA cm−2 and 1 mAh cm−2, whereas Zn||I2 full cells maintain a high retention rate of 99.97% after 8000 cycles at 15 mA cm−2. Thus, this work demonstrates a scalable, biomass based multilayer separator provides an effective strategy to regulate Zn plating behavior and achieve a dendrite free Zn metal anode, offering a promising way toward highly stable AZIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Engineering fluorine-rich double protective layer on Zn anode for highly reversible aqueous zinc-ion batteries10.1002/anie.202314883 ↗
2. Zinc-based metal halide electrolytes for all-solid-state zinc-metal batteries10.1038/s41467-026-68394-4 ↗
3. Initiating a high-rate and stable aqueous air battery by using organic N-Heterocycle anode10.1002/anie.202318885 ↗
4. Insight into the corrosion microcell and passivation mechanisms of a Zn anode for aqueous zinc-ion batteries [10.1039/D5EE01719J]10.1039/D5EE01719J ↗
5. Failure mechanisms and remedy of an ultrathin Zn metal anode in pouch cells10.1016/j.joule.2024.07.013 ↗
6. Crystallization control and defect reduction for superior corrosion resistance of zinc anodes in aqueous zinc-ion batteries [10.1039/D5EE02109J]10.1039/D5EE02109J ↗
7. Ion redistribution gel electrolyte dissipates interfacial turbulence for aqueous zinc-ion batteries10.1002/aenm.202404367 ↗
8. Suppressing zinc metal corrosion by an effective and durable corrosion inhibitor for stable aqueous zinc batteries10.1002/adfm.202418594 ↗
9. Regulating the electrochemical reduction kinetics by the steric hindrance effect for a robust Zn metal anode [10.1039/D3EE02164E]10.1039/D3EE02164E ↗
10. Tailoring Zn2+ flux by an ion acceleration layer modified separator for high-rate long-lasting Zn metal anodes10.1002/advs.202407410 ↗
11. Multifunctional separator design for regulating Zn2+ ion flux and Zn stripping in anode-less Zn metal batteries10.1021/acs.nanolett.5c02642 ↗
12. Metal–organic frameworks functionalized separators for robust aqueous zinc-ion batteries10.1007/s40820-022-00960-z ↗
13. Artificial protrusion architectures enabling horizontal-diffusion nucleation for stable zinc-based batteries10.1021/jacs.5c11951 ↗
14. In situ construction of porous ZnO layer with more exposed (002) polar facets toward long-cycling zinc metal anodes10.1063/5.0307482 ↗
15. Spontaneous construction of nucleophilic carbonyl-containing interphase toward ultrastable zinc-metal anodes10.1002/adma.202202733 ↗
16. Wang, X., Hu, S., Xiao, F., Xu, G., Zhao, Z., Chang, C., Zhang, X., Han, C., Li, H.-F., & Cheng, H.-M. A highly water-retentive electrolyte enabling stable aqueous zinc-ion batteries across a wide temperature range. Adv. Funct. Mater., n/a(n/a), e19785. https://doi.org/10.1002/adfm.202519785.10.1002/adfm.202519785 ↗
17. Advancements in separator materials for aqueous zinc batteries10.1039/D5NH00172B ↗
18. The role and mechanism of separators in aqueous zinc metal batteries: a critical review10.1002/aenm.202502652 ↗
19. Efficient Zn2+ transport tailoring by BiOIO3 nanosheets modified glass fiber separator toward ultra-stable Zn metal anodes10.1016/j.cej.2025.162737 ↗
20. Novel air-rechargeable aqueous Zn-based batteries with N-doped hierarchical-porous carbon as the capacitor-type cathode
21. Amine-functionalized MIL-125 separator and MOF-derived carbon host for high-performance aqueous zinc-iodine batteries10.1002/aenm.202504201 ↗
22. Printing-scalable Ti3C2Tx MXene-Decorated janus separator with expedited Zn2+ flux toward stabilized Zn anodes10.1002/adfm.202204306 ↗
23. Ternary Zn3V3O8 superstructure and synergistic modification of separator promote high performance and stable zinc ion battery10.1016/j.cej.2024.150377 ↗
24. A janus separator regulating zinc deposition behavior synergistically by cellulose and ZrO2 nanoparticles toward high-performance aqueous zinc-ion batteries10.1002/smll.202411463 ↗
25. Janus binder chemistry for synchronous enhancement of iodine species adsorption and redox kinetics toward sustainable aqueous Zn–I2 batteries10.1021/jacs.3c12638 ↗
26. Lignin-derived polyanionic crosslinked gel interfacial layer with ion-sieving and ion-regulating capabilities for dendrite-free zinc anodes10.1002/anie.202508359 ↗
27. Molecular chain rearrangement of natural cellulose-based artificial interphase for ultra-stable Zn metal anodes10.1002/anie.202418992 ↗
28. Homogenizing Zn2+ transport and deposition by molecular aggregation state regulation of cellulose separator for high-performance aqueous Zn-Ion batteries
29. Cellulose proton conductor: both sulfonic acid and hydrophobic group functionalization enable high proton conductivity10.1021/jacsau.5c00547 ↗
30. Scalable production of carboxylated cellulose nanofibres using a green and recyclable solvent10.1038/s41893-024-01267-0 ↗
31. Zwitterionic cellulose-based polymer electrolyte enabled by aqueous solution casting for high-performance solid-state batteries10.1002/anie.202400477 ↗
32. Engineering polymer-based porous membrane for sustainable lithium-ion battery separators10.3390/polym15183690 ↗
33. Thin and low-cost separator enables dendrite growth suppression in zinc anodes for ultra-stable aqueous zinc-ion batteries10.1007/s12598-025-03430-8 ↗
34. Fourier transform infrared spectroscopic analysis in applied cotton fiber and cottonseed research: a review10.56454/INBJ9899 ↗
35. Green preparation of lightweight, high-strength cellulose-based foam and evaluation of its adsorption properties10.3390/polym15081879 ↗
36. Ampere-hour-scale zinc–air pouch cells10.1038/s41560-021-00807-8 ↗
37. Surface sulfonic-group bonded oxygen evolution catalyst for proton exchange membrane water electrolysis10.1038/s41467-025-64857-2 ↗
38. Green facile fabrication of flame-retardant straw cellulose nanofiber laminate with enhanced mechanical strength10.1016/j.compositesb.2025.112377 ↗
39. Understanding the zeta potential in regulating Zn deposition kinetics for Zn-Ion batteries10.1002/adma.202513563 ↗
40. Bacterial cellulose mixed with glass fiber as a separator to achieve long cycle life of aqueous zinc-ion batteries10.1016/j.est.2025.117395 ↗
41. Coaxial wet-spinning fiber-shaped Zn-ion batteries enabled by Zn powder and cellulose nanofiber reinforced gel electrolyte [10.1039/D5TA08185H]10.1039/D5TA08185H ↗
42. Elucidation of the sodium-ion storage behaviors in hard carbon anodes through pore architecture engineering10.1021/acsnano.5c03700 ↗
43. Stable sodium-metal batteries in carbonate electrolytes achieved by bifunctional, sustainable separators with tailored alignment10.1002/adma.202206367 ↗
44. High electrolyte uptake of MXene integrated membrane separators for Zn-ion batteries10.1038/s41598-022-24578-8 ↗
45. Microfiber/nanofiber/attapulgite multilayer separator with a pore-size gradient for high-performance and safe lithium-ion batteries10.3390/molecules29143277 ↗
46. Novel aramid nanofiber-coated polypropylene separators for lithium ion batteries [10.1039/C5TA08694A]10.1039/C5TA08694A ↗
47. Polymer-ceramic multi-modified PE separators for lithium ion battery with enhanced durability and safety10.1016/j.pnsc.2025.07.001 ↗
48. Preventing dissolution of cathode active materials by ion-anchoring zeolite-based separators for durable aqueous zinc batteries10.1002/anie.202315464 ↗
49. Functionalized separator with integrated mass transfer selectivity and kinetics regulation toward durable Zn anodes10.1021/acsnano.5c14285 ↗
50. Anti-dendrite separator interlayer enabling staged zinc deposition for enhanced cycling stability of aqueous zinc batteries10.1038/s41467-024-55153-6 ↗
51. Interfacial energy-level modulation enables electron-ion decoupling for hydrogen suppression and highly durable zinc metal anodes
52. Multisite cooperative regulation of solvation and interface via dynamic additive engineering for highly reversible zinc batteries10.1002/anie.202511685 ↗
53. Configuring a robust sulfur-rich shielding interphase for suppressing electric-field-driven zinc corrosion
54. The timescale identification decoupling complicated kinetic processes in lithium batteries10.1016/j.joule.2022.05.005 ↗
55. Solvation-configurational entropy governs interfacial kinetics in low-temperature batteries10.1016/j.joule.2025.102271 ↗