journal article·2025-12

Microstructural and mechanical property comparison between direct HPDC and machined samples of AM50 magnesium alloy

Shengqing Liu, Chunyu Li, Hongfen Feng, Jiangfeng Song, Hecong Xie, Hengrui Hu, Qian Zhu, Liang Gao, Ang Zhang, Tian Li, Jiang Zheng, Sujuan Wu, Bin Jiang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Recent developments in high-pressure die-cast magnesium alloys for automotive and future applications10.1016/j.jma.2022.10.001 ↗
2. A review of magnesium die-castings for closure applications10.1016/j.jma.2019.02.005 ↗
3. Machine learning accelerated design of magnesium alloys with high strength and high ductility10.1016/j.mtcomm.2025.111894 ↗
4. Recent research and development on forming for large magnesium alloy components with high mechanical properties10.1016/j.jma.2023.09.038 ↗
5. Review of progress on fabrication technology of mg matrix composites10.1016/j.jma.2024.11.026 ↗
6. Enhancing the room-temperature plasticity of magnesium alloys: mechanisms and strategies10.1016/j.jma.2024.12.008 ↗
7. Optimisation of Hot-Chamber Die-Casting process of AM60 alloy using taguchi method10.3390/ma17246256 ↗
8. Prediction of alloying element effects on the mechanical behavior of high-pressure die-cast Mg-based alloys
9. Influence of cerium addition on microstructure, mechanical properties, and dry sliding wear behavior of AM50 magnesium alloy
10. Vehicle giga-casting al alloys technologies, applications, and beyond10.1016/j.jallcom.2025.178552 ↗
11. Progress and prospects in Mg-alloy super-sized high pressure die casting for automotive structural components10.1016/j.jma.2023.11.003 ↗
12. Recent progress on cast magnesium alloy and components10.1007/s10853-024-09459-x ↗
13. Characterization on the formation of porosity and tensile properties prediction in die casting mg alloys10.1016/j.jma.2020.12.006 ↗
14. Influence of defects on deformation behavior of High-Pressure Die-Casting magnesium alloys10.24425/afe.2023.144289 ↗
15. Statistical analysis on the mechanical properties of magnesium alloys10.3390/ma10111271 ↗
16. Impact of a large dominant pore and its location on ductility of thin-walled high-pressure die-cast magnesium10.1016/j.jma.2025.04.008 ↗
17. Quantitative analysis of 3D pore characteristics effect on the ductility of HPDC Al–10Si-0.3 mg alloy through X-ray tomography10.1016/j.jmrt.2023.09.179 ↗
18. Investigation of properties in magnesium alloy thin plates after die casting processes
19. Three-dimensional characteristics of shrinkage porosities in Mg-xAl-1Zn-0.2Mn alloys and their relationship with microstructures10.1016/j.jmrt.2024.11.268 ↗
20. Characteristics and formation mechanisms of defect bands in vacuum-assisted high-pressure die casting AE44 alloy10.1016/S1003-6326(22)65913-2 ↗
21. Effect of mischmetal on mechanical properties and microstructure of die-cast magnesium alloy AZ91D10.1016/S1002-0721(16)60086-8 ↗
22. The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy10.1016/j.jma.2022.05.001 ↗
23. Scatter analysis of fatigue life and pore size data of die-cast AM60B magnesium alloy10.1016/j.engfailanal.2012.01.005 ↗
24. Effect of porosity and α-Al(Fe/Mn)Si phase on ductility of high-pressure die-casting Al−7Si−0.2Mg alloy10.1016/S1003-6326(23)66405-2 ↗
25. Influence of High-Speed ram transition position on porosity and mechanical properties of large One-Piece Die-Casting Al-Si-Mn-Mg aluminium alloy10.3390/ma17246169 ↗
26. Effects of process parameters on morphology and distribution of externally solidified crystals in microstructure of magnesium alloy die castings10.1007/s41230-018-7242-z ↗
27. The ductility variation of High-Pressure Die-Cast AE44 alloy: the role of inhomogeneous microstructure10.1007/s11661-021-06220-w ↗
28. Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd10.1016/j.actamat.2019.11.034 ↗
29. Effect of alloying with al, nd and ca and heat treatment on microstructures and mechanical properties of vacuum Die-Cast AM50 alloy
30. Thin-walled and large-sized magnesium alloy die castings for passenger car cockpit: application, materials, and manufacture10.1007/s41230-024-4100-z ↗
31. Mechanism of porosity-induced damage evolution and failure in high pressure die casting AE81 magnesium alloy: an in-situ SEM and micro-CT study10.1016/j.jallcom.2025.180790 ↗
32. Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys10.1016/j.jmapro.2020.04.071 ↗
33. Correlation between density and microstructural features in vacuum die cast AZ91D magnesium alloy10.2320/matertrans.M2016318 ↗
34. Performance evaluation of different air venting methods on high pressure aluminum die casting process10.12693/APhysPolA.135.664 ↗
35. Defect band formation in high pressure die casting AE44 magnesium alloy10.1007/s41230-022-1220-1 ↗
36. Influence of melt flow on the formation of defect band in high pressure die casting of AZ91D magnesium alloy10.1016/j.matchar.2017.05.009 ↗
37. Relationship between internal porosity and fracture strength of die-cast magnesium AM60B alloy10.1016/j.msea.2004.12.042 ↗
38. Evaluation of cooling rate effects on the mechanical properties of die cast magnesium alloy AM6010.1007/s11661-016-3698-x ↗
39. Effect of gradient layer on the compressive mechanical behavior of AZ31 magnesium alloy
40. Using multiscale second phases to fabricate high-performance Mg-3Al-3Nd-0.1Mn alloys with bimodal grain structures10.1016/j.mtcomm.2024.109191 ↗
41. Understanding the interplay of porosity on the microstructural, mechanical, and corrosion behavior of binder-jet additive-manufactured Mg-Zn-Zr alloy10.1016/j.msea.2025.148649 ↗
42. Effect of position on the tensile properties in high-pressure die cast mg alloy10.1016/j.jallcom.2008.02.051 ↗
43. Measuring and modeling microsegregation in High-Pressure die cast Mg–Al alloys10.1007/s11661-022-06702-5 ↗
44. Constitutive model of die-cast light-alloy thin-walled parts considering geometric imperfection
45. Effect of strain rate on the defect susceptibility of tensile properties to porosity variation10.1016/j.msea.2016.12.007 ↗
46. Effect of gas pores on mechanical properties of High-Pressure Die-Casting AM50 magnesium alloy10.1017/S1431927616011375 ↗
47. Correlation of 3D defect-band morphologies and mechanical properties in high pressure die casting magnesium alloy10.1016/j.jmatprotec.2020.116853 ↗
48. Quantification of the interaction within defect populations on fatigue behavior in an aluminum alloy10.1016/j.actamat.2009.04.008 ↗
49. The role of the Mg17Al12-phase in the high-pressure die-cast magnesium-aluminum alloy system10.1016/j.jma.2023.08.011 ↗
50. Porosity quantification for ductility prediction in high pressure die casting AM60 alloy using 3D X-ray tomography10.1016/j.msea.2019.138781 ↗
51. Fast shot speed induced microstructure and mechanical property evolution of high pressure die casting Mg-Al-Zn-RE alloys10.1016/j.jmatprotec.2024.118523 ↗