journal article·2026-08

Finite Element Investigation of the Effects of Proximal and Distal Diameter Variations of the Trunnion of Hip Implants on Contact Stress, and Micro-Sliding, under the Human Gait Cycle

Md Mohiuddin Soliman, Abdullah Alharthi, Abdulmajeed M. Alenezi, Mohamad A. Alawad, Mohd Hafiz Bin Baharuddin, Md. Shabiul Islam, Mohammad Tariqul Islam

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. National joint registry annual reports
2. Profound Trunnion Wear Resulting in Femoral Head-Neck Dissociation in Total Hip Arthroplasty
3. Evidence based recommendations for reducing head-neck taper connection fretting corrosion in hip replacement prostheses10.5301/hipint.5000545 ↗
4. A new finding on the in-vivo crevice corrosion damage in a CoCrMo hip implant10.1016/j.msec.2017.05.086 ↗
5. Taper junction failure in large-diameter metal-on-metal bearings10.1302/2046-3758.14.2000047 ↗
6. A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis10.1016/j.jmbbm.2017.01.018 ↗
7. Flexural Rigidity, Taper Angle, and Contact Length Affect Fretting of the Femoral Stem Trunnion in Total Hip Arthroplasty10.1016/j.arth.2016.02.079 ↗
8. Head-neck taper corrosion in hip arthroplasty10.1155/2015/758123 ↗
9. Impaction Force Influences Taper-Trunnion Stability in Total Hip Arthroplasty10.1016/j.arth.2018.01.020 ↗
10. Design, Material, and Seating Load Effects on In Vitro Fretting Corrosion Performance of Modular Head-Neck Tapers10.1016/j.arth.2019.01.043 ↗
11. Influence of stem type on material loss at the metal-on-metal pinnacle taper junction10.1177/0954411914567931 ↗
12. Effect of Taper Design on Trunnionosis in Metal on Polyethylene Total Hip Arthroplasty10.1016/j.arth.2015.02.031 ↗
13. Finite element analysis of the head–neck taper interface of modular hip prostheses10.1016/j.triboint.2015.01.016 ↗
14. Trunnionosis: Does Head Size Affect Fretting and Corrosion in Total Hip Arthroplasty?10.1016/j.arth.2016.03.009 ↗
15. The influence of head size on corrosion and fretting behaviour at the head-neck interface of artificial hip joints10.1016/j.arth.2012.10.017 ↗
16. Wear patterns of taper connections in retrieved large diameter metal-on-metal bearings10.1002/jor.22326 ↗
17. Head Taper Corrosion Causing Head Bottoming Out and Consecutive Gross Stem Taper Failure in Total Hip Arthroplasty10.1016/j.arth.2018.07.017 ↗
18. A Review of Biomaterials and Associated Performance Metrics Analysis in Pre-Clinical Finite Element Model and in Implementation Stages for Total Hip Implant System10.3390/polym14204308 ↗
19. Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement10.1016/j.medengphy.2006.07.001 ↗
20. The Influence of Contamination and Cleaning on the Strength of Modular Head Taper Fixation in Total Hip Arthroplasty10.1016/j.arth.2017.05.009 ↗
21. K N C. Wear estimation of hip implants with varying chamfer geometry at the trunnion junction: a finite element analysis10.1088/2057-1976/acb710 ↗
22. Finite Element Study on Stability in the Femoral Neck and Head Connection to Varying Geometric Parameters with the Relates Implications on the Effect of Wear10.3390/jcs7090387 ↗
23. Factors influencing taper failure of modular revision hip stems10.1016/j.medengphy.2018.02.001 ↗
24. Finite element based simulation of tribocorrosion at the head-neck junction of hip implants10.1016/j.triboint.2021.107284 ↗
25. Effect of Taper Design on Trunnionosis in Metal on Polyethylene Total Hip Arthroplasty10.1016/j.arth.2015.02.031 ↗
26. Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements10.1007/s11999-013-3115-3 ↗
27. A combined experimental and finite element approach to analyse the fretting mechanism of the head-stem taper junction in total hip replacement10.1177/0954411917713774 ↗
28. Adaptive finite element simulation of fretting wear and fatigue in a taper junction of modular hip prosthesis10.1016/j.jmbbm.2020.103993 ↗
29. Standardized Loads Acting in Hip Implants10.1371/journal.pone.0155612 ↗
30. [15-Year Results Following Implantation of a Stem Type AML Hip Prosthesis.]
31. vitro testing of the deformation pattern and initial stability of a cementless stem coupled to an experimental femoral head, with increased offset and altered femoral neck angles10.1177/0954411911403818 ↗
32. Full-field measurement of micromotion around a cementless femoral stem using micro-CT imaging and radiopaque markers10.1016/j.jbiomech.2016.10.029 ↗
33. Long Term Performance of an Uncemented, Proximally Hydroxyapatite Coated, Double Tapered, Titanium-Alloy Femoral Stem: Results From 1465 Hips at 10 years Minimum Follow-Up10.1016/j.arth.2020.08.013 ↗
34. A simple method to minimize limb-length discrepancy after hip arthroplasty10.1080/17453670610046280 ↗
35. Perception of imposed leg length inequality in normal subjects10.1177/112070001002000414 ↗
36. Is bone remodelling around fully hydroxyapatite-coated and tapered-wedge stems related to the stem fixation pattern?
37. Reconstruction of the anatomy of the hip in total hip arthroplasty with two different kinds of stems10.1186/s12891-022-05152-9 ↗
38. Migration, stem shape, and surface finish in cemented total hip arthroplasty10.1097/00003086-199810000-00011 ↗
39. Relationship between bone-prosthesis bonding and load transfer in total hip reconstruction10.1016/S0021-9290(97)00003-1 ↗
40. Can finite element models detect clinically inferior cemented hip implants?10.1097/01.blo.0000058882.03274.5e ↗
41. Is stem length important in uncemented endoprostheses?10.1016/1350-4533(95)90854-5 ↗
42. The geoelectric field coast effect: Results from two dimensional finite element method and analytic solutions10.1016/j.aej.2023.06.089 ↗
43. Finite element based direct and iterative approach to investigate a magneto-micropolar flow through a rectangular channel10.1016/j.aej.2023.05.038 ↗
44. Elshamy M., Crosby W.A., Elhadary M. Crack detection of cantilever beam by natural frequency tracking using experimental and finite element analysis. Alexandria Engineering Journal. 2018;57:3755-3766.10.1016/j.aej.2018.10.002 ↗
45. Orthoload Database. Orthoload; 2023.
46. Hip implant modular junction: The role of CoCrMo alloy microstructure on fretting-corrosion10.1016/j.jmbbm.2022.105402 ↗
47. Fabrication of a high-performance hip prosthetic stem using β Ti–33.6Nb–4Sn10.1016/j.jmbbm.2013.11.002 ↗
48. Biomaterials for hip implants@ important considerations relating to the choice of materials10.1515/bams-2017-0017 ↗
49. Peltola · Materials used for hip and knee implants · 2013 · 178
50. Heterogeneous modeling based prosthesis design with porosity and material variation10.1016/j.jmbbm.2018.07.029 ↗
51. Effect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis
52. A computational approach to fretting wear prediction at the head–stem taper junction of total hip replacements10.1016/j.wear.2015.06.016 ↗
53. Mechanical Stability of the Taper Connection of Large Metal Femoral Heads With Adapter Sleeves in Total Hip Arthroplasty Analyzed Using Explicit Finite Element Simulations10.1016/j.arth.2017.03.033 ↗
54. The effects of manufacturing tolerances and assembly force on the volumetric wear at the taper junction in modular total hip arthroplasty10.1080/10255842.2019.1627524 ↗
55. A review on the finite element simulation of fretting wear and corrosion in the taper junction of hip replacement implants10.1016/j.compbiomed.2020.104196 ↗
56. The mechanics of head-neck taper junctions: What do we know from finite element analysis?10.1016/j.jmbbm.2021.104338 ↗
57. Titanium Alloys - Ti6Al4V Grade 5. AZom.com; 2026.
58. 9.6.2. Contact Formulation Theory. Ansys; 2026.
59. Impact of leg length adjustment, base offset, neck length and neck cross-section variations on hip implant joints and neck mechanics10.1016/j.matdes.2026.116181 ↗
60. Effect of varying trunnion geometry of hip implant on contact mechanics under walking gait cycle: A finite element study10.1016/j.matdes.2026.116453 ↗
61. Influence of geometry and materials on the axial and torsional strength of the head-neck taper junction in modular hip replacements: A finite element study10.1016/j.jmbbm.2015.12.044 ↗
62. Long-term results using the anatomic medullary locking hip prosthesis10.1097/00003086-200112000-00016 ↗
63. Advancement in total hip implant: a comprehensive review of mechanics and performance parameters across diverse novelties10.1039/D3TB01469J ↗
64. Design and Performance Evaluation of a Novel Spiral Head-Stem Trunnion for Hip Implants Using Finite Element Analysis10.3390/ma16041466 ↗
65. Dalli · Development of a low-wearing novel hip joint prosthesis with a longer lifespan: University of Malta · 2021
66. A novel hip joint prosthesis with uni-directional articulations for reduced wear10.1016/j.jmbbm.2021.105072 ↗
67. A finite element methodology for wear–fatigue analysis for modular hip implants10.1016/j.triboint.2013.02.016 ↗
68. Richard · 2011
69. Quantitative assessment of walking activity after total hip or knee replacement10.2106/00004623-199801000-00010 ↗
70. A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis10.1016/j.jmbbm.2017.01.018 ↗
71. Hip simulator testing of the taper-trunnion junction and bearing surfaces of contemporary metal-on-cross-linked-polyethylene hip prostheses10.1002/jbm.b.34374 ↗
72. Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system10.1002/jor.22970 ↗
73. Variation in taper surface roughness for a single design effects the wear rate in total hip arthroplasty10.1002/jor.23456 ↗
74. Determining material loss from the femoral stem trunnion in hip arthroplasty using a coordinate measuring machine10.1177/0954411914567552 ↗
75. Fretting and Corrosion Damage in Retrieved Metal-on-Polyethylene Modular Total Hip Arthroplasty Systems: What Is the Importance of Femoral Head Size?10.1016/j.arth.2017.10.010 ↗
76. Do ceramic femoral heads reduce taper fretting corrosion in hip arthroplasty? A retrieval study10.1007/s11999-013-3096-2 ↗