Synergistic effect of SCMs and fibers on the mechanical and durability performance of cementitious mortars
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (83)
Show source-provided references
1. Life cycle assessment of ordinary Portland cement production in South Africa: mid-point and end-point approaches10.3390/su16073001 ↗
2. Optimizing calcium efficiency for sustainable cement with GGBFS-fly ash systems10.1038/s41598-025-16959-6 ↗
3. A Comprehensive Review on the Ground Granulated Blast Furnace Slag (GGBS) in Concrete Production10.3390/su14148783 ↗
4. Durability properties of high volume fly ash concrete containing nano-silica10.1617/s11527-014-0329-0 ↗
5. Enhancing concrete performance through sustainable utilization of Class-C and Class-F Fly Ash: a Comprehensive Review10.3390/su16124905 ↗
6. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
7. Development and Characterization of Fly Ash/Slag-Blended Geopolymer Mortar and Lightweight Concrete10.1061/(ASCE)MT.1943-5533.0002209 ↗
8. Development of a low-cost cement free polymer concrete using industrial by-products and dune sand10.1051/matecconf/201712003005 ↗
9. Aïtcin · 2016
10. Performance and Mechanism of Polycarboxylate Superplasticizer in Red Mud Blended Cementitious Materials10.3390/polym17131738 ↗
11. Assessment of cement characteristics affecting rheological properties of cement pastes10.1007/s00521-021-05925-8 ↗
12. Assessment and prediction of cement paste flow behavior; Marsh-funnel flow time and mini-slump values10.1016/j.conbuildmat.2021.124072 ↗
13. Effect of side chain length change of polycarboxylate-ether based high range water reducing admixture on properties of self-compacting concrete10.1016/j.conbuildmat.2020.118427 ↗
14. Multi-effect of superplasticisers main and side-chain length on cementitious systems with fly ash10.1680/jmacr.21.00134 ↗
15. Effects of anionic monomer type of water-reducing admixture on fresh properties, compressive strength and water adsorption of self-compacting concrete10.1080/01694243.2020.1840896 ↗
16. Effect of polycarboxylate-based water-reducing admixture chains length on portland cement-admixture compatibility
17. Combined interaction of PCE chains lengths, C3A and water content in cementitious systems10.1016/j.conbuildmat.2023.131178 ↗
18. Durability properties of fibrillated polypropylene fibre reinforced high performance concrete
19. Mechanical Properties of Macro Polypropylene Fibre-Reinforced Concrete10.3390/polym13234112 ↗
20. Bentur · 1990
21. Study on the rheology, mechanical properties and microstructure of polypropylene fibers in different binder systems
22. Mechanical and micro structural studies of fiber reinforced mortar mixtures at elevated temperature
23. Experimental study of permeable concrete with fly ash and ground-granulated blast furnace slag as partial replacement to cement10.1080/19648189.2024.2417674 ↗
24. Exploring fiber reinforcements in concrete and its challenges: A comprehensive review10.1007/s41939-024-00404-8 ↗
25. Mechanical properties and sulfate resistance of high-volume fly ash cement mortars with air-cooled slag as fine aggregate and polypropylene fibers10.3390/ma12030469 ↗
26. High temperature resistant restoration mortar with fly ash and GGBFS
27. European Committee for Standardization, EN 197-1: Cement - Composition, specifications and conformity criteria for common cements, European Committee for Standardization, Brussels, Belgium., 2011.
28. European Committee for Standardization, EN 196-2: Methods of testing cement-Part 2: Chemical analysis of cement. CEN, Brussels, Belgium, 2016.
29. European Committee for Standardization, EN 196-6: Methods of testing cement-Part 6: Determination of fineness. CEN, Brussels, Belgium, 2016.
30. European Committee for Standardization, EN 196-3: Methods of testing cement-Part 3: Determination of setting times and soundness. CEN, Brussels, Belgium, 2016.
31. European Committee for Standardization, EN 196-1: Methods of testing cement-Part 1: Determination of strength. CEN, Brussels, Belgium, 2016.
32. American Society for Testing and Materials, ASTM C618-23, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken, PA, 2023.
33. American Society for Testing and Materials, ASTM C989 / C989M-18a: Standard specification for slag cement for use in concrete and mortars. West Conshohocken, Pennsylvania, USA: ASTM, 2018. DOI: https://doi.org/10.1520/C0989_C0989M-18A.10.1520/C0989_C0989M-18A ↗
34. Neville · 1996
35. European Committee for Standardization, EN 12620: Aggregates for concrete, European Committee for Standardization, Brussels, Belgium., 2002.
36. Effect of Viscosity-Enhancing Admixtures on Formwork Pressure and Thixotropy of Self-Consolidating Concrete
37. European Committee for Standardization, EN 1008: Mixing water for concrete – Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete, European Committee for Standardization, Brussels, Belgium, 2002.
38. ASTM, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), C109, ASTM International, West Conshohocken, PA, 2016.
39. European Committee for Standardization, Methods of test for mortar for masonry - Determination of consistence of fresh mortar (by flow table), EN 1015-3:1999, European Committee for Standardization, Brussels, Belgium., 1999.
40. ASTM, Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement, ASTM International, West Conshohocken, PA, 2023.
41. European Committee for Standardization, Natural stone test methods. Determination of the abrasion resistance, European Committee for Standardization, Brussels, Belgium, 2017.
42. ASTM, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM International, West Conshohocken, PA, 1997.
43. ASTM, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, C642, ASTM International, West Conshohocken, PA, 2013.
44. ASTM, Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete, C1609, ASTM International, West Conshohocken, PA, 2019.
45. Prediction of long-term effects of GGBFS on compressive strength of concrete by artificial neural networks and fuzzy logic10.1016/j.conbuildmat.2008.07.021 ↗
46. Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energies10.1016/j.cemconres.2005.11.002 ↗
47. Effects of chemical composition of fly ash on compressive strength of fly ash cement mortar10.1016/j.conbuildmat.2019.01.208 ↗
48. Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles10.1016/j.conbuildmat.2014.07.099 ↗
49. Fiber-reinforced cementitious composites: recent advances and future perspectives on key properties for high-performance design10.1007/s44290-025-00209-9 ↗
50. Laboratory study on the effect of polypropylene fiber on durability, and physical and mechanical characteristic of concrete for application in sleepers10.1016/j.conbuildmat.2013.02.076 ↗
51. Effects of Shrinkage Reducing Admixture and Polypropylene Fiber Utilization on Some Fresh State, Mechanical and Durability Properties of Khorasan Mortar10.1080/15583058.2022.2100295 ↗
52. Rheological and mechanical properties of fiber-reinforced alkali-activated composite10.1016/j.conbuildmat.2015.07.182 ↗
53. The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete10.1016/j.conbuildmat.2009.11.025 ↗
54. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
55. Pervious concrete pavement incorporating GGBS to alleviate pavement runoff and improve urban sustainability10.1080/14680629.2016.1251957 ↗
56. Flexural and Impact Behaviors of Mortar Composite Including Carbon Fibers10.3390/ma15051657 ↗
57. Performance of recycled aggregate concrete with supplementary cementitious materials (fly ash, GBFS, silica fume, and metakaolin): Mechanical properties, pore structure, and water absorption10.1016/j.conbuildmat.2023.130455 ↗
58. Mechanism of SCMs on the hydration, pore structure, and durability of UHPFRC
59. Effect of supplementary cementitious materials on the compressive strength and durability of short-term cured concrete10.1016/j.cemconres.2003.08.017 ↗
60. Rheology, shrinkage and pore structure of alkali-activated slag-fly ash mortar incorporating copper slag as fine aggregate10.1016/j.conbuildmat.2020.118029 ↗
61. Drying shrinkage properties of fiber-reinforced alkali-activated slag and their correlations with microstructure10.1016/j.conbuildmat.2023.134669 ↗
62. Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar10.1016/j.cemconres.2003.11.021 ↗
63. Shrinkage mitigation, strength enhancement and microstructure improvement of alkali-activated slag/fly ash binders by ultrafine waste concrete powder10.1016/j.compositesb.2021.109570 ↗
64. A Review on Efficiency of Polypropylene Fiber-Reinforced Concrete
65. Effect of the addition of polypropylene fiber on concrete properties10.1080/01694243.2021.1922221 ↗
66. Combined effect of Polypropylene fibers and Silica Fume to improve the durability of concrete with natural Pozzolans blended cement10.1016/j.conbuildmat.2015.08.050 ↗
67. Mechanical and durability performance of concrete mixtures incorporating bentonite, silica fume, and polypropylene fibers10.1016/j.conbuildmat.2022.128223 ↗
68. Performance of polypropylene fiber reinforced GGBFS-based alkali activated composites under sulfate and freeze–thaw conditions10.1617/s11527-023-02137-5 ↗
69. Synergistic effects of polypropylene fiber and basalt fiber on the mechanical properties of concrete incorporating fly ash ceramsite after freeze-thaw cycles
70. Study on the deterioration mechanism of hybrid basalt-polypropylene fiber-reinforced concrete under sulfate freeze-thaw cycles10.1016/j.conbuildmat.2024.138560 ↗
71. The influence of SCMs on the pore structure evolution and carbonation of cement pastes under early carbonization10.1016/j.conbuildmat.2025.140194 ↗
72. Durability performance and dimensional stability of road concrete containing dry-shake surface hardener admixture10.1016/j.conbuildmat.2020.121789 ↗
73. Improving concrete underground mining pavements performance through the synergic effect of silica fume, nanosilica, and polypropylene fibers10.1016/j.conbuildmat.2021.122895 ↗
74. Improving the abrasion resistance of hydraulic-concrete containing surface crack by adding silica fume10.1016/j.conbuildmat.2006.03.001 ↗
75. Correlation analysis of abrasion resistance of rubber concrete with microstructure and pore structure10.1016/j.conbuildmat.2025.141211 ↗
76. Experimental Evaluation of the Mechanical Strengths and the Thermal Conductivity of GGBFS and Silica Fume Based Alkali-Activated Concrete10.3390/ma14247717 ↗
77. The effect of elevated temperature on the performance of pozzolanic cement mortar10.1007/s44290-024-00056-0 ↗
78. Role of polypropylene fibres in concrete spalling risk mitigation in fire and test methods of fibres effectiveness evaluation10.3390/ma12233869 ↗
79. Experimental study on the effect of polypropylene fiber on compressive strength and fracture properties of high-strength concrete after elevated temperatures
80. High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
81. Use of polypropylene fibers to mitigate spalling in high strength PE-ECC under elevated temperature
82. Basic physical, mechanical, thermal and hygric properties of reactive powder concrete with basalt and polypropylene fibers after high-temperature exposure10.1016/j.conbuildmat.2023.130922 ↗
83. Workability, flexural response and shrinkage crack restriction of fiber-reinforced SCC: Effects of low coarse aggregate content and microfiber type10.1016/j.conbuildmat.2025.142586 ↗